非晶硅薄膜太阳能电池热模型的模拟与实验研究

上海交通大学学报（自然版） ›› 2015, Vol. 49 ›› Issue (04): 436-441.

非晶硅薄膜太阳能电池热模型的模拟与实验研究

胡建辉1a，陈务军1a，赵兵1a，胡鹏宇1a，葛彬彬1b，宋浩2

(1. 上海交通大学 a. 空间结构研究中心; b. 太阳能研究所，上海 200240；2. 上海太阳膜结构有限公司，上海 200030)

收稿日期:2014-06-01 出版日期:2015-04-28 发布日期:2015-04-28
基金资助:
国家自然科学基金资助项目（51278299）

Numerical and Experimental Study on a Thermal Model of Flexible Amorphous Silicon Thin Film Photovoltaic Panels

HU Jianhui1a,CHEN Wujun1a,ZHAO Bing1a,HU Pengyu1a,GE Binbin1b,SONG Hao2

(1a. Space Structures Research Center; 1b. Institute of Solar Energy, Shanghai Jiaotong University,Shanghai 200240, China; 2. Shanghai Taiyokogyo Co. Ltd., Shanghai 200030, China)

Received:2014-06-01 Online:2015-04-28 Published:2015-04-28

摘要/Abstract

摘要：

摘要：为了研究柔性非晶硅薄膜太阳能电池（a-Si PV）在晴和多云天气下的温度值，基于能量守恒法建立了a-Si PV的光热模型，考察了各部分参数取值，编写了微分方程的求解程序，并设计研制了一套实验模型进行验证.实验结果表明：a-Si PV电池的温度受日照辐射强度的影响最为显著；安装角度和环境温度也在一定程度上影响a-Si PV的温度值；晴天时的温差大于多云天气下的温差.实测值与模拟值对比表明：该模型可以准确模拟PV温度在晴和多云天气下的变化；数值结果与实验结果最大差值为3.9 °C，主要原因是多云天气日照辐射强度的波动性和PV材料热容引起的热响应时滞.建立的a-Si PV热模型考虑了主要的影响因素，可较为准确地得到在晴和多云天气下的温度变化.

关键词: 柔性非晶硅薄膜太阳能电池, 热模型, 温度

Abstract:

Abstract： In order to investigate the temperature of amorphous silicon photovoltaic panel (a-Si PV) under sunny and cloudy conditions, a thermal model was developed based on the total energy balance on the control volume. In the differential equation, the corresponding short wave radiation, long wave radiation, convection and generated power were determined, respectively. And then, this equation was solved by a newly-developed program. Besides, an experimental mockup was designed to get the experimental data for the verification of the numerical results. The measured results show that the effect of solar irradiance on temperature is much more significant than that of the installation angles and ambient temperature, and that the maximum temperature variation under sunny condition is greater than that under cloudy condition. The comparative analysis shows that this model could correctly predict the temperature of the a-Si PV under sunny and cloudy conditions. The maximum difference is 3.9 °C. The acceptable reasons are the solar irradiance with strong fluctuation under cloudy condition and the PV thermal response time effects caused by the thermal mass of the PV materials. In summary, this model could consider most of the variables influencing the temperature of the PV and get the precise temperature variation of the a-Si PV under sunny and cloudy conditions.

Key words: flexible amorphous silicon photovoltaic(a-Si PV) panel, thermal model, temperature

中图分类号:

胡建辉1a，陈务军1a，赵兵1a，胡鹏宇1a，葛彬彬1b，宋浩2. 非晶硅薄膜太阳能电池热模型的模拟与实验研究[J]. 上海交通大学学报（自然版）, 2015, 49(04): 436-441.

HU Jianhui1a,CHEN Wujun1a,ZHAO Bing1a,HU Pengyu1a,GE Binbin1b,SONG Hao2. Numerical and Experimental Study on a Thermal Model of Flexible Amorphous Silicon Thin Film Photovoltaic Panels[J]. Journal of Shanghai Jiaotong University, 2015, 49(04): 436-441.

参考文献

［1］Parida B, Iniyan S, Goic R. A review of solar photovoltaic technologies ［J］. Renewable and Sustainable Energy Reviews, 2011,15(3):16251636.

［2］周南. 柔性薄膜太阳能电池力学性能及其在膜结构中的应用研究［D］. 杭州: 浙江大学建筑工程学院, 2010.

［3］Hu Jianhui, Chen Wujun, Zhao Bing, et al. Experimental studies on summer performance and feasibility of a BIPV/T ethylene tetrafluoroethylene (ETFE) cushion structure system ［J］. Energy and Buildings, 2014,69:394406.

［4］Chen W, Hu J, Song H. Novel BIPV/T ETFE cushion ［C］∥Textile Composites and Inflatable Structures. Munich: Springer, 2013: 363374.

［5］Poirazis H, Kragh M, Hogg C. Energy modelling of ETFE membranes in building applications ［C］∥Eleventh International IBPSA Conference. Glasgow： Taylor and Francis: 2009: 696703.

［6］TamizhMani G, Ji L, Tang Y, et al. Photovoltaic module thermal/wind performance: longterm monitoring and model development for energy rating ［C］∥NCPV and Solar Program Review Meeting. Denver: Golden Corporation, 2003: 14.

［7］Tiwari G, Mishra R, Solanki S. Photovoltaic modules and their applications a review on thermal modelling ［J］. Applied Energy, 2011,88(7):22872304.

［8］Davis M W, Fanney A H, Dougherty B P. Prediction of building integrated photovoltaic cell temperatures ［J］. Journal of Solar Energy Engineering, 2001, 123(3):200210.

［9］Jones A D, Underwood C P. A thermal model for photovoltaic systems ［J］. Solar Energy, 2001,70 (4):349359.

［10］United Solar Ovonic. Unisolar technical report［R］. Michigan: United Solar Ovonic, 2006.

［11］吴继臣, 徐刚. 全国主要城市冬季太阳辐射强度的研究［J］. 哈尔滨工业大学学报, 2003,35 (10):12361239.

WU Jichen, XU Gang. Major Chinese cities’ solar radiant intensities in winter ［J］. Journal of Harbin Institute of Technology, 2003, 35(10): 12361239.

［12］Gaur A, Tiwari G N. Performance of aSi thin film PV modules with and without water flow: An experimental validation ［J］. Applied Energy, 2014,128:184191.

［13］Balog R S, Kuai Y, Uhrhan G. A photovoltaic module thermal model using observed insolation and meteorological data to support a long life, highly reliable moduleintegrated inverter design by predicting expected operating temperature ［C］∥Energy Conversion Congress and Exposition. Atlanta: IEEE, 2009: 33433349.

［14］沈世钊. 膜结构——发展迅速的新型空间结构［J］. 哈尔滨建筑大学学报, 1999,32(2):1115.

SHEN Shizhao, Membrane structure——An innovative spatial structure with bright prospect ［J］. Journal of Harbin University of Civil Engineering and Architecture, 1999, 32(2): 1115.

［15］陈务军. 膜结构工程设计［M］. 北京: 中国建筑工业出版社, 2005.

［16］Ramabadran R, Mathur B. Effect of shading on series and parallel connected solar PV modules ［J］. Modern Applied Science, 2009,3(10):3242.

[1]	马莎莎, 丁圣洁, 刘利民, 赵长颖, 顾汉洋, 龚帅. 高温热管碱金属工质的蒸发弯月面区域微观传热特性[J]. 上海交通大学学报, 2025, 59(5): 617-627.
[2]	刘逸, 张开林, 邵帅, 向泓旭. 基于热-流-固耦合的齿轮箱稳态热性能研究[J]. 上海交通大学学报, 2025, 59(5): 666-674.
[3]	徐箭, 余青芳, 廖思阳, 柯德平, 孙元章. 考虑生产安全的工业园区联络线功率平滑策略[J]. 上海交通大学学报, 2024, 58(6): 941-953.
[4]	冯漾漾, 丁浩亮, 胡平山, 严波. 注塑模稳态温度场的有限体积法模拟[J]. 上海交通大学学报, 2024, 58(4): 461-467.
[5]	李吉昊1, 林冠英2, 王暖升3, 李洋3, 李俊漾1. 柔性海洋CTD传感器发展概述[J]. 海洋工程装备与技术, 2024, 11(3): 69-77.
[6]	范博超, 张刚, 齐江龙, 杜云祥. 燃烧室声腔模态特性影响因素研究[J]. 空天防御, 2024, 7(3): 72-78.
[7]	洪蕾1，肖皓1，叶佳2，马国红1. 径向超声波辅助MIG焊电弧的数值模拟[J]. J Shanghai Jiaotong Univ Sci, 2024, 29(2): 330-338.
[8]	赵威, 李少鹏, 曹志兴, 刘锐, 邱爽. 油田终端原油处理系统异常分析及处理[J]. 海洋工程装备与技术, 2024, 11(2): 67-71.
[9]	张国冻, 杨森, 于成龙, 邓冠华, 钱程. 涌流抑制器在海洋平台电力系统的应用[J]. 海洋工程装备与技术, 2024, 11(2): 63-66.
[10]	刘城, 王晓光, 尹浩, 章国光, 熊昌. 泵用新型两极异步起动永磁同步电机的设计与优化[J]. 上海交通大学学报, 2024, 58(12): 1977-1987.
[11]	陈尔东, 高孜航, 王坤东, 雷华明. 一种分区温控的实时荧光PCR快速热循环系统设计[J]. 上海交通大学学报, 2023, 57(9): 1196-1202.
[12]	程显达, 郑皓冉, 杨学森, 董威. 高速飞行器燃油瞬态温度预测的修正热网络法[J]. 上海交通大学学报, 2023, 57(6): 728-738.
[13]	王雪维，王逸飞，张爱丽. 温控射频消融温度场快速计算方法的研究[J]. J Shanghai Jiaotong Univ Sci, 2023, 28(4): 411-.
[14]	杜立彬, 崔永超, 刘杰, 张晓波. 投弃式温盐深测量仪发展概述[J]. 海洋工程装备与技术, 2023, 10(3): 33-40.
[15]	韩云峰岳元龙魏娟左信孙瀚轩. 水下压力温度一体变送器技术现状 [J]. 海洋工程装备与技术, 2023, 10(3): 90-98.