进气噪声源提取和空滤器声学性能优化

摘要/Abstract

摘要：

测量了安装不同声学负载时某发动机的进气噪声.运用基于四负载的最小二乘法提取了进气噪声源，并计算安装某一负载时的进气噪声，与实验值进行对比.结果表明，在大部分频率范围内，仿真值与实验值吻合较好，说明提取的声源准确可靠.运用有限元方法计算原空滤器的声学特性，结合进气噪声源，计算安装空滤器时进气噪声的阶次成分，确定需要消声的频率点，通过增设和改进消声元件，达到了降噪的目的.

关键词: 阶次进气噪声, 空气净化器, 进气噪声源, 最小二乘法, 有限元法

Abstract:

The intake noise of engine fixed with different acoustical loads was measured and the intake acoustical source was extracted using the fourload least squares method. The calculated and experimental values of the intake noise when fixed with one load were compared. The comparison results show that at most of the frequency range, the simulation values agree well with the experimental ones, indicating that the acoustical source extracted is reliable. By taking into consideration the intake acoustical source and by culculating the acoustical characteristics of the original air-cleaner using the FEM approach, the order components of intake noise was computed. The frequencies where the noise needed to be lowered were found. Finally, the noise was reduced by adding or better designing noise eliminating elements.

Key words: intake acoustical source, order components of intake noise, aircleaner, least squares method, finit element method

中图分类号:

TK 402

胡先锋，郝志勇，刘联鋆，钱欣怡. 进气噪声源提取和空滤器声学性能优化[J]. 上海交通大学学报（自然版）, 2013, 47(06): 1003-1008.

HU Xianfeng,HAO Zhiyong,LIU Lianyun,QIAN Xinyi. Extraction of Intake Acoustical Source and Optimization of Acoustic Performance of Air-cleaner[J]. Journal of Shanghai Jiaotong University, 2013, 47(06): 1003-1008.

参考文献

［1］金岩,郝志勇.针对通过噪声的空滤器声学特性研究与改进［J］. 浙江大学学报：工学版, 2006, 40(8): 14431444.

JIN Yan, HAO Zhiyong. Investigation and improvement of airin filter acoustic performance towards passby noise［J］. Journal of Zhejiang University：Engineering Science, 2006, 40(8): 14431444.

［2］贾维新,郝志勇.空滤器声学性能预测及低频噪声控制的研究［J］. 内燃机工程, 2006, 27(5): 6770.

JIA Weixin, HAO Zhiyong. Prediction of air cleaners and the study of noise control at low frequency ［J］. Chinese Internal Combustion Engine Engineering, 2006, 27(5): 6770.

［3］LIU Chi, HAO Zhiyong, CHEN Xinrui. Optimal design of acoustic performance for automotive aircleaner［J］. Applied Acoustic, 2010, 71(5):431438.

［4］刘联鋆,郝志勇,刘迟.空气滤清器流动阻力与噪声特性的仿真和优化［J］. 汽车工程, 2011, 33(12): 10921097.

LIU Lianyun,HAO Zhiyong,LIU Chi. Simulation and optimization of flow resistance and noise characteristics of aircleaner ［J］. Automotive Engineering, 2011, 33(12): 10921097.

［5］徐红梅,郝志勇,郭磊.阶次分析在发动机进气噪声研究中的应用［J］. 小型内燃机与摩托车, 2008, 37(1): 8386.

XU Hongmei, HAO Zhiyong, GUO Lei. Application of order analysis in intake noise research of engine ［J］. Small Internal Combustion Engine and Motorcycle, 2008, 37(1): 8386.

［6］朱廉洁,季振林.汽车发动机空气滤清器消声特性研究［J］. 汽车工程, 2008, 30(3): 260263.

ZHU Lianjie,JI Zhenlin. A study on the noise attenuation characteristics of air cleaner in automotive engine ［J］. Automotive Engineering, 2008, 30(3): 260263.

［7］朱廉洁,季振林.汽车空气滤清器声学性能数值计算及分析［J］. 噪声与振动控制, 2007, 27(2): 5558.

ZHU Lianjie,JI Zhenlin. Numerical calculation and analysis of acoustic characteristics of automotive air cleaner［J］. Noise and Vibration Control, 2007, 27(2): 5558.

［8］Boden H. On multiload methods for determination of the source data of acoustic oneport sources ［J］. Journal of Sound and Vibration,1995,180(5):725743.

［9］Harrison M F, Stanev P T. A linear acoustic model for intake wave dynamics in IC engines［J］. Journal of Sound and Vibration, 2004,269(1):361388.

［10］福田基一，奥田襄介．噪声控制与消声［M］．北京:北京国防工业出版社,1982.

［11］许肖梅.声学基础［M］.北京:科学出版社，2003:184196.

［12］孙飞虹,张建华,张存宏,等. 共振腔消声器在煤矿风井噪声治理中的应用［J］. 能源环境保护, 2004, 18(6): 4345.

ZHANG Feihong, ZHANG Jianhua, ZHANG Cunhong,

et al. Application of the resonater silencer in the noise control of air shaft at coal mines［J］. Energy Environmental Protection, 2004, 18(6): 4345.

［13］阮登芳,邓兆祥,杨诚.共振式消声器声学性能分析［J］. 内燃机工程, 2006,27(1): 6670.

RUAN Dengfang, DENG Zhaoxiang, YANG Cheng. Analysis of acoustic performance of the resonant silencer ［J］. Chinese Internal Combustion Engine Engineering, 2006,27(1): 6670.

[1]	张培珍, 林芳. 开式呼吸蛙人专用氧气瓶声散射特性[J]. 上海交通大学学报, 2022, 56(6): 764-771.
[2]	张宇, 刘海亭, 翁琳, 沈耀. 环形缺口小冲杆试样结合内聚力模型提取断裂韧性参数[J]. 上海交通大学学报, 2021, 55(7): 850-857.
[3]	郑昌隆, 丁晓红, 沈洪, 赵利娟. 基于自适应成长法的舵面结构动力学拓扑优化设计方法研究[J]. 空天防御, 2021, 4(2): 7-.
[4]	王峰, 陈佳莉, 陈灯红, 范勇, 李志远, 何卫平. 基于滑动Kriging插值的EFG-SBM求解含侧边界的稳态热传导问题[J]. 上海交通大学学报, 2021, 55(11): 1483-1492.
[5]	刘昊东, 张庆振, 郭云鹤, 茅佳雯. 基于递推最小二乘法的变体飞行器模型参数在线辨识[J]. 空天防御, 2020, 3(3): 103-110.
[6]	蒋倩倩，王家序，李俊阳，肖科，唐挺，王成. 双圆弧谐波传动齿廓参数对柔轮应力影响[J]. 上海交通大学学报, 2020, 54(2): 167-175.
[7]	陈玉珊, 秦琳琳, 吴刚, 毛俊鑫. 基于渐消记忆递推最小二乘法的电动汽车电池荷电状态在线估计[J]. 上海交通大学学报, 2020, 54(12): 1340-1346.
[8]	叶礼裕, 王超, 郭春雨, 常欣. 集中冰载工况下的桨叶边缘强度校核方法[J]. 上海交通大学学报, 2020, 54(1): 10-19.
[9]	杜慧敏，罗震，敖三三，张禹，郝志壮. 5052铝合金电阻点焊电极形状对电极寿命的影响[J]. 上海交通大学学报, 2019, 53(6): 708-712.
[10]	刘永财，鲍益东，秦雪娇，刘玉琳，陈文亮. 板料成形快速模拟的中间构形构造方法[J]. 上海交通大学学报, 2019, 53(6): 713-718.
[11]	尹雪乐，张文光，唐嘉琪，于谦. 多柄鱼骨状神经电极的微动模拟与优化设计[J]. 上海交通大学学报, 2019, 53(5): 529-534.
[12]	张建军，刘卫东，李乐，程瑞锋，郑海峰. 未知环境下水下机械手智能抓取的自适应阻抗控制[J]. 上海交通大学学报（自然版）, 2019, 53(3): 341-347.
[13]	张向奎，王洋，王长生，胡平. 基于逆有限元法和网格映射的板材成型坯料优化[J]. 上海交通大学学报, 2019, 53(11): 1389-1394.
[14]	闫棣, 苏祺, 李四平. 屈曲问题有限元模拟的随机缺陷法[J]. 上海交通大学学报, 2019, 53(1): 19-25.
[15]	王紫旻，刘奇，顾瑞瑩，王武荣，韦习成. 凹模温度对AZ31B镁合金板材冲压成形性能的影响[J]. 上海交通大学学报（自然版）, 2018, 52(9): 1092-1097.