上海交通大学学报 ›› 2025, Vol. 59 ›› Issue (1): 89-98.doi: 10.16183/j.cnki.jsjtu.2023.175

• 船舶海洋与建筑工程 • 上一篇    下一篇

基于船舶-流场运动耦合的内河航道设计方法

张磊1,4, 封少雄1,4, 谭昆2, 郭涛2, 宋成果2, 初秀民3, 苗洋1,4()   

  1. 1.武汉理工大学 绿色智能江海直达船舶与邮轮游艇研究中心,武汉 430063
    2.长江航道规划设计研究院,武汉 430040
    3.武汉理工大学 智能交通系统研究中心,武汉 430063
    4.绿色智能江海直达船舶湖北省工程研究中心,武汉 430063
  • 收稿日期:2023-05-06 修回日期:2023-08-19 接受日期:2023-09-07 出版日期:2025-01-28 发布日期:2025-02-06
  • 通讯作者: 苗洋,硕士生,电话(Tel.):027-86308715;E-mail: Vnisky@163.com.
  • 作者简介:张磊(1988—),副研究员,主要从事计算流体力学、绿色智能船舶技术研究.
  • 基金资助:
    海南省科技计划三亚崖州湾科技城联合项目(2021JJLH0035);国家自然科学基金(52201377);中央高校基本科研业务费专项资金(WUT:223173001)

A Design Method of Inland River Channel Based on Hydrodynamic Response of Ship

ZHANG Lei1,4, FENG Shaoxiong1,4, TAN Kun2, GUO Tao2, SONG Chengguo2, CHU Xiumin3, MIAO Yang1,4()   

  1. 1. Green and Smart River-Sea-Going Ship Cruise and Yacht Research Center, Wuhan University of Technology, Wuhan 430063, China
    2. Changjiang Waterway Institute of Planning and Design, Wuhan 430040, China
    3. Intelligent Transportation Systems Research Center, Wuhan University of Technology, Wuhan 430063, China
    4. Hubei Province Engineering Research Center on Green and Smart River-Sea-Going Ship, Wuhan 430063, China
  • Received:2023-05-06 Revised:2023-08-19 Accepted:2023-09-07 Online:2025-01-28 Published:2025-02-06

摘要:

航道一般指江河及运河内可供船舶通航的水域,目前大多采用流场演化规律分析结合工程人员经验的方法开展规划设计,对通行船舶这一因素考虑不够全面.拟从河道中船舶与流场直接作用的角度提出一种内河航道设计方法.首先,基于Fluent二次开发,突破了船舶-流场相互作用的水动力响应解耦算法,对内河航段中船舶自由漂流运动进行模拟,其中,流场使用有限体积法进行求解,船舶运动控制方程通过用户自定义模块(UDF)输入并采用四阶Runge-Kutta法求解,动网格技术用于更新计算域;然后,考虑航行频率,给予通行船型不同权重,使用加权最小二乘法对漂流轨迹进行曲线拟合,得到航道边界线.选取了长江东流(从天生洲起)这一具有典型碍航结构物(弯道、分汊)航段开展航道设计验证.研究结果表明:设计的航道与现行规划航道趋势一致;同时,结合流场细节云图对船舶运动响应过程进行分析,发现设计的航道可使船舶有效规避风险急流、斜流,合理利用水流动能,提升航行安全性和经济性.

关键词: 内河, 航道设计, 船舶-流场运动耦合, 船舶, 水动力响应

Abstract:

Channel is the navigable area for ships in rivers and canals. The analyses of flow details and experiences of engineers are extensively used for the design of channel nowadays, without thorough consideration of the fluid-structure interaction between flow and ships. In this paper, an inland channel design method based on ship hydrodynamic response is proposed. First of all, the secondary development is undertaken based on Fluent for the problem of ship-flow interaction, in which flow domain is simulated by using the finite volume method, and governing equations of ship are embedded through user defined function (UDF) and solved by using the fourth-order Runge-Kutta method. The dynamic mesh technique is adopted to update the changing computation domains. The hydrodynamic motion response of freely drifting ships in inland waterway is simulated, as well as trajectory. Then, the weighted least square method is used for curve fitting from the drifting trajectories of different ships, by which the channel boundaries are designed. The weight coefficients are obtained through the statistic of sailing frequencies of different ships. Dongliu route with typical navigation obstructions of curve and branch is chosen for the verification of the channel design method. It is found that the channel designed by the method with consideration of ship-flow interaction is consistent with the existing one. Besides, the analyses of flow details and ship responses indicate that ships sailing in this channel can avoid the influences of oblique flow and make use of the energy of flow, which maintains the sailing safety and economy.

Key words: inland river, channel design, ship-flow interaction, ship, hydrodynamic response

中图分类号: