Modeling, Identification and Simulation of DC Resistance Spot Welding Process for Aluminum Alloy 5182

doi:10.1007/s12204-013-1371-8

Abstract

Abstract: Currently the aluminum alloy resistance spot welding (AA-RSW) has been extensively used for light weight automotive body-in-white manufacturing. However the aluminum alloys such as AA5182 have inferior weldability for forming the joint due to their high reflectiveness to heat and light. Therefore it is necessary to further develop the high performance control strategy and the set-up of a new welding schedule. The welding process identification is the essential issue where the difficulty arises from the fact that the AA-RSWis a nonlinear time-varying uncertain process which couples the thermal, electrical, mechanical and metallurgical dynamics. To understand this complicated physical phenomenon a novel dual-phase M-series pseudo-random electrical pattern is adopted to excite the AA-RSW electrical-thermal process and the thermal response is recorded according to the welding power outputs. Based on the experimental information, the transfer function of an AA-RSW electricalthermal mechanism is identified, and the optimum model order and parameters are determined. Subsequently a control-oriented DC AA-RSWmodel is established to explore the welding power control algorithm. The simulated results of the control model show agreement with the experimental data, which validates its feasibility for the corresponding welding control.

Key words: resistance spot welding (RSW)| aluminum alloy| system identification| modeling and simulation

摘要： Currently the aluminum alloy resistance spot welding (AA-RSW) has been extensively used for light weight automotive body-in-white manufacturing. However the aluminum alloys such as AA5182 have inferior weldability for forming the joint due to their high reflectiveness to heat and light. Therefore it is necessary to further develop the high performance control strategy and the set-up of a new welding schedule. The welding process identification is the essential issue where the difficulty arises from the fact that the AA-RSWis a nonlinear time-varying uncertain process which couples the thermal, electrical, mechanical and metallurgical dynamics. To understand this complicated physical phenomenon a novel dual-phase M-series pseudo-random electrical pattern is adopted to excite the AA-RSW electrical-thermal process and the thermal response is recorded according to the welding power outputs. Based on the experimental information, the transfer function of an AA-RSW electricalthermal mechanism is identified, and the optimum model order and parameters are determined. Subsequently a control-oriented DC AA-RSWmodel is established to explore the welding power control algorithm. The simulated results of the control model show agreement with the experimental data, which validates its feasibility for the corresponding welding control.

关键词: resistance spot welding (RSW)| aluminum alloy| system identification| modeling and simulation

CLC Number:

TG 438.2

GONG Liang1* (贡亮), XI Yan2 (席艳), Ma Zhe-ren1 (马喆人), LIU Cheng-liang1 (刘成良). Modeling, Identification and Simulation of DC Resistance Spot Welding Process for Aluminum Alloy 5182[J]. Journal of shanghai Jiaotong University (Science), 2013, 18(1): 101-104.

References

[1] Gould J E. Joining aluminum sheet in the automotive industry: A 30 year history [J]. Welding Journal, 2012, 91(1): 23-34.
[2] Florea R S, Bammann D J, Yeldell A, et al. Welding parameters influence on fatigue life and microstructure in resistance spot welding of 6061-T6 aluminum alloy [J]. Materials and Design, 2013, 45(3): 456-465.
[3] Wang S C, Wei P S. Modeling dynamic electrical resistance during resistance spot welding [J]. Transaction of the ASME, 2001, 123(6): 576-585.
[4] Williams N T, Parker J D. Review of resistance spot welding of steel sheets. Part 1. Modeling and control of weld nugget formation [J]. International Material Review, 2004, 49(2): 45-75.
[5] Gong L, Liu C L, Yuan J, et al. Fuzzy orthogonal optimization for determining the optimal resistance spot welding parameters [J]. Applied Mechanics and Materials, 2012, 152-154: 1046-1051.
[6] Salem M, Brown L J. Improved consistency of resistance spot welding with tip voltage control [C]//Proceedings of 24th Canadian Conference on Electrical and Computer Engineering (CCECE). Niagara Falls, Canada: IEEE, 2011: 548-551.
[7] The Aluminum Association. Aluminum standards and data, 2009 metric SI [M]. New York: The Aluminum Association, 2009.
[8] Gong L, Liu C L, Li Y M. Control criteria determination and quality inference for resistance spot welding through monitoring the electrode displacement using Bayesian belief networks [J]. Journal of Advanced Mechanical Design, Systems, and Manufacturing, 2012, 6(4): 432-444.
[9] Jun S M, Kim G S, Kim J M, et al. Power control of resistance spot welding system with high dynamic performance [C]// Proceedings of 23rd International Conference on Industrial Electronics, Control and Instrumentation. New Orleans, LA: IEEE, 1997: 845-849.
[10] Gupta O P, De A. An improved numerical modeling for resistance spot welding process and its experimental verification [J]. Transaction of the ASME, 1998, 120(5): 246-251.

[1]	LI Yuanhui, LI Jianjun, WANG Shunchao, ZHANG Longyao, ZHU Wenfeng. Modeling and Experiment on Roll-Hemming Forming Process of Aluminum Alloy Sheet with Adhesive [J]. Journal of Shanghai Jiao Tong University, 2022, 56(4): 532-542.
[2]	ZHOU Yu, ZHAO Yong, YU Zhongqi, ZHAO Yixi. Numerical Simulation of Stagger Spinning of Cylindrical Part with Cross Inner Ribs [J]. Journal of Shanghai Jiao Tong University, 2022, 56(1): 62-69.
[3]	HE Lihua, PAN Jianfeng, NI Jing, FENG Kai, CUI Zhi. Surface Micro-Texture and Cutting Characteristics of Milling Cutter for Die-Casting Aluminum Alloy [J]. Journal of Shanghai Jiao Tong University, 2021, 55(6): 750-756.
[4]	WANG Xianjin, GAO Xu, YU Kuigang . Fixture Locating Modelling and Optimization Research of Aluminum Alloy Sidewall in a High-Speed Train Body [J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 706-713.
[5]	DU Huimin,LUO Zhen,AO Sansan,ZHANG Yu,HAO Zhizhuang. Influence of the Electrode Shape on Service Life in 5052 Aluminum Alloy Resistance Spot Welding [J]. Journal of Shanghai Jiaotong University, 2019, 53(6): 708-712.
[6]	DU Chenyang,KONG Qingshuai,ZHAO Yixi,YU Zhongqi. Evaluation of Flange Wrinkling Prediction Methods of Conventional Spinning for Thin-Walled Spherical Components [J]. Journal of Shanghai Jiaotong University, 2019, 53(4): 431-437.
[7]	LI Xuelong,YU Zhongqi,ZHAO Yixi,EVSYUKOV S A. Study on Flange Wrinkling Prediction in Preforming Stage During Multi-Pass Conventional Spinning [J]. Journal of Shanghai Jiaotong University, 2019, 53(11): 1375-1380.
[8]	LI Ping,ZHANG Kai,WANG Boxiaotian,XUE Kemin. Microstructure and Mechanical Properties of 7A60 Aluminum Alloy by Friction Stir Processing [J]. Journal of Shanghai Jiaotong University, 2019, 53(11): 1381-1388.
[9]	LIU Ruofan, YU Zhongqi, ZHAO Yixi, EVSYUKOV S A. Formability of Flange Constraint Spinning for Aluminum Cup Part [J]. Journal of Shanghai Jiao Tong University, 2019, 53(1): 105-110.
[10]	YANG Ke1,ZHAO Yixi1,FENG Changwen2,YU Zhihua2. Approach of Design of Process Dimension for Hemming of Aluminum Alloys [J]. Journal of Shanghai Jiaotong University, 2018, 52(2): 182-187.
[11]	HUANG Zunyue，LUO Zhen，ZHANG Yu，YAO Qi. Aluminum Sheet Laser Welding Deformation Measurements [J]. Journal of Shanghai Jiaotong University, 2015, 49(03): 326-328.
[12]	SHEN Hongyuan1，2,CHEN Huabin2,LIN Tao2,CHEN Shanben2. Passive Visual Technology in Aluminum Alloy Welding [J]. Journal of Shanghai Jiaotong University, 2015, 49(03): 341-343.
[13]	LI Jiangchuan1,CHEN Jun1,CHEN Jieshi1,XIA Cedric2,ZENG Danielle2. Flow Stress Curve Modeling of Bake-Hardening A6111 Aluminum Alloy [J]. Journal of Shanghai Jiaotong University, 2013, 47(11): 1680-1684.
[14]	ZHANG Kewei1,SHE Huan2,LIU Hongliang2,SHU Da2,WANG Jun2. Influence of Si Contents on Microstructures and Mechanical Properties of High Strength and Toughness 7050 Aluminum Alloys [J]. Journal of Shanghai Jiaotong University, 2013, 47(11): 1712-1716.
[15]	LI Da1,2 (李达), CUI Zhan-quan2 (崔占全), YANG Qing-xiang2* (杨庆祥),SUN Bing1 (孙兵), SUN Ming-hui2 (孙明辉). Microstructure and Property of Friction Stir Welding Joint of 7075Al and AZ31BMg [J]. Journal of shanghai Jiaotong University (Science), 2012, 17(6): 679-683.