Effect of Orthogonal Stiffeners on the Stability of Axially Compressed Steel Jacking Pipe

doi:10.1007/s12204-017-1867-8

Abstract

Abstract: Load conditions for steel pipe-jacking are complex during the construction stage. The stability of steel jacking pipe has been an increasingly important problem as jacking forces, pipe diameters and jacking distances increase. However, there are no standards for pipe reinforcement, for prevention of buckling, or for remedying pipe that buckles when being jacked axially. Past experience suggests that stiffeners can effectively reinforce the structure. This study analyzes the effect of different stiffeners on the stability of steel jacking pipe under axial compression using finite element analysis. The results suggest that the stability of steel jacking pipe can be significantly improved by using orthogonal stiffeners, in terms of engineering costs and construction space inside the pipe. Based on current engineering practice, the application of orthogonal stiffeners is discussed. This study provides a useful reference for the design and construction of steel jacking pipe.

Key words: steel pipe-jacking| stiffeners| numerical simulation| stability analysis

摘要： Load conditions for steel pipe-jacking are complex during the construction stage. The stability of steel jacking pipe has been an increasingly important problem as jacking forces, pipe diameters and jacking distances increase. However, there are no standards for pipe reinforcement, for prevention of buckling, or for remedying pipe that buckles when being jacked axially. Past experience suggests that stiffeners can effectively reinforce the structure. This study analyzes the effect of different stiffeners on the stability of steel jacking pipe under axial compression using finite element analysis. The results suggest that the stability of steel jacking pipe can be significantly improved by using orthogonal stiffeners, in terms of engineering costs and construction space inside the pipe. Based on current engineering practice, the application of orthogonal stiffeners is discussed. This study provides a useful reference for the design and construction of steel jacking pipe.

关键词: steel pipe-jacking| stiffeners| numerical simulation| stability analysis

CLC Number:

TU 990.3

ZHEN Lianga (甑亮), CHEN Jinjiana* (陈锦剑),. Effect of Orthogonal Stiffeners on the Stability of Axially Compressed Steel Jacking Pipe[J]. Journal of shanghai Jiaotong University (Science), 2017, 22(5): 536-540.

References 10

[1]	ZHEN L, CHEN J J, QIAO P Z, et al. Analysis and remedial treatment of a steel pipe-jacking accident in complex underground environment [J]. Engineering Structures, 2014, 59: 210-219.
[2]	ZHAO Y, TENG J G. Stability design of axially compressed thin steel cylindrical shells [J]. Engineering Mechanics, 2003, 20(6): 116-126 (in Chinese).
[3]	SADEGHIFARM, BAGHERIM, JAFARI A A.Multiobjective optimization of orthogonally stiffened cylindrical shells for minimum weight and maximum axial buckling load [J]. Thin-Walled Structures, 2010,48(12): 979-988.
[4]	BAGHERI M, JAFARI A A, SADEGHIFAR M. Multiobjective optimization of ring stiffened cylindrical shells using a genetic algorithm [J]. Journal of Sound and Vibration, 2011, 330(3): 374-384.
[5]	MAO J, JIANG Z Y, CHEN G N, et al. Design and optimization research on rib-stiffened thin cylindrical shell under axial loading [J]. Engineering Mechanics,2011, 28(8): 183-192 (in Chinese).
[6]	LONG L C, ZHAO B, CHEN X H. Buckling analysis and optimization of thin-walled stiffened cylindrical shell [J]. Journal of Beijing University of Technology,2012, 38(7): 997-1003 (in Chinese).
[7]	REN X J, ZHANG L C. Study of stability of large-scale thin-walled cylindrical shells under axial compression[J]. Engineering Journal of Wuhan University, 2010,43(4): 507-510 (in Chinese).
[8]	ZHOU S, WANG Y Y, HUANG X C. Experimental study on the effect of injecting slurry inside a jacking pipe tunnel in silt stratum [J]. Tunnelling and Underground Space Technology, 2009, 24(4): 466-471.
[9]	Shanghai Municipal Engineering Design Institute (Group) Co Ltd. Technical specification for pipe jacking of water supply and sewerage engineering: CECS 246-2008 [S]. Beijing: Standardization Administration of the People’s Republic of China, 2008 (in Chinese).
[10]	General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China, Standardization Administration of the People’s Republic of China. Hot rolled section steel: GB/T 706-2008 [S]. Beijing: Standards Press of China, 2008 (in Chinese).

[1]	CAO Taichun, WU Gang, KONG Xiangyi, YU Dongwei, WU Lin, ZHANG Dayong. Influence of Convection Heat Transfer on Circular Tube Structure of Polar Marine Engineering Equipment [J]. Journal of Shanghai Jiao Tong University, 2023, 57(1): 17-23.
[2]	DING Enbao, CHANG Shengming, SUN Cong, ZHAO Leiming, WU Hao. Hydrodynamic Characteristics of a Surface Piercing Propeller Entering Water with Different Radiuses [J]. Journal of Shanghai Jiao Tong University, 2022, 56(9): 1188-1198.
[3]	WU Huaina, FENG Donglin, LIU Yuan, LAN Ganzhou, CHEN Renpeng. Anti-Uplift Portal Frame in Control of Underlying Tunnel Deformation Induced by Foundation Pit Excavation [J]. Journal of Shanghai Jiao Tong University, 2022, 56(9): 1227-1237.
[4]	LIU Jinhao, YAN Yuanzhong, ZHANG Qi, BIAN Rong, HE Lei, YE Guanlin. Centrifugal Test and Numerical Analysis of Impact of Surface Surcharge on Existing Tunnels [J]. Journal of Shanghai Jiao Tong University, 2022, 56(7): 886-896.
[5]	CHEN Yonglin (陈永霖), YANG Weidong (杨伟东), XIE Weicheng (谢炜程), WANG Xiaoliang (王晓亮), FU Gongyi∗ (付功义). Meso-Scale Tearing Mechanism Analysis of Flexible Fabric Composite for Stratospheric Airship via Experiment and Numerical Simulation [J]. J Shanghai Jiaotong Univ Sci, 2022, 27(6): 873-884.
[6]	LI Jia, LI Huacong, WANG Yue. Transient Characteristics of a High-Speed Aero-Fuel Centrifugal Pump in Variable Gas-Liquid Ratio Conditions [J]. Journal of Shanghai Jiao Tong University, 2022, 56(5): 622-634.
[7]	SUN Jian, PENG Bin, ZHU Bingguo. Numerical Simulation and Experimental Study of Oil-Free Double-Warp Air Scroll Compressor [J]. Journal of Shanghai Jiao Tong University, 2022, 56(5): 611-621.
[8]	XU Huilia (许慧丽), ZOU Zaojiana,b∗ (邹早建). Numerical Simulation of the Flow in a Waterjet Intake Under Different Motion Conditions [J]. J Shanghai Jiaotong Univ Sci, 2022, 27(3): 356-364.
[9]	QIN Han, WU Bin, SONG Yuhui, LIU Jin, CHEN Lan. Numerical Analysis of Support Interference for a Slender Configuration at Super Large Angles of Attack in High Speed Wind Tunnel [J]. Air & Space Defense, 2022, 5(3): 44-51.
[10]	XUE Fei, WANG Yuchao, WU Bin. Study on Backward Separation Characteristics of High-Speed Air Vehicle [J]. Air & Space Defense, 2022, 5(3): 80-86.
[11]	WAN Hui, QI Xiaohui, LI Jie. Linear Matrix Inequality Based Stability Analysis of Linear/Nonlinear Switching Active Disturbance Rejection Control System [J]. Journal of Shanghai Jiao Tong University, 2022, 56(11): 1491-1501.
[12]	ZHENG Gaoyuan, ZHAO Yixi, CUI Junhui. Formation Law of Surface Defects in Stretch-Bending Formamtion of Aluminum Trim Strip for Automobile Body [J]. Journal of Shanghai Jiao Tong University, 2022, 56(1): 53-61.
[13]	ZHOU Yu, ZHAO Yong, YU Zhongqi, ZHAO Yixi. Numerical Simulation of Stagger Spinning of Cylindrical Part with Cross Inner Ribs [J]. Journal of Shanghai Jiao Tong University, 2022, 56(1): 62-69.
[14]	JIN Ge, FAN Min, ZHOU Zhendong, TAN Yong, ZHONG Xiaobo. Analysis and Improvement of Dynamic Characteristics of Lift Check Valves [J]. Journal of Shanghai Jiao Tong University, 2021, 55(S2): 110-118.
[15]	XU Dehui, GU Hanyang, LIU Li, HUANG Chao. Thermal Experimental and Numerical Study on Performance of a Novel Conical Swirl-Vane Steam Separator [J]. Journal of Shanghai Jiao Tong University, 2021, 55(9): 1087-1094.