[1] |
HUANG H Z, TIAN Z G, ZUO M J. Multiobjectiveoptimization of three-stage spur gear reduction unitsusing interactive physical programming [J]. Journalof Mechanical Science and Technology, 2005, 19(5):1080-1086.
|
[2] |
RAO S S, TJANDRA M. Reliability-based design ofautomotive transmission systems [J]. Reliability Engineering and System Safety, 1994, 46(2): 159-169.
|
[3] |
SARPER H. Reliability analysis of descent systems ofplanetary vehicles using bivariate exponential distribution [C]//Proceedings of Annual Reliability and Maintainability Symposium. [s.l.]: IEEE, 2005: 165-169.
|
[4] |
CHAARI F, BACCAR W, ABBES M S, et al. Effect of spalling or tooth breakage on gearmesh sti?nessand dynamic response of a one-stage spur gear transmission [J]. European Journal of Mechanics-A/Solids,2008, 27(4): 691-705.
|
[5] |
HOWARD I, JIA S X, WANG J D. The dynamic modelling of a spur gear in mesh including friction and acrack [J]. Mechanical Systems and Signal Processing,2001, 15(5): 831-853.
|
[6] |
MENG Y H, WU C G, LING L P. Mathematical modeling of the transmission performance of 2K-H pin cycloid planetary mechanism [J]. Mechanism and Machine Theory, 2007, 42(7): 776-790.
|
[7] |
CHOY F K, POLYSHCHUK V, ZAKRAJSEK J J, etal. Analysis of the e?ects of surface pitting and wear on the vibration of a gear transmission system [J]. Tribology International, 1996, 29(1): 77-83.
|
[8] |
ANDERSON N E, LOEWENTHAL S H. E?ect of geometry and operating conditions on spur gear systempower loss [J]. Journal of Mechanical Design, 1981,103(1): 151-159.
|
[9] |
TUTTLE T D, SEERING W P. A nonlinear model ofa harmonic drive gear transmission [J]. IEEE Transactions on Robotics and Automation, 1996, 12(3): 368-374.
|
[10] |
KUBUR M, KAHRAMAN A, ZINI D M, et al. Dynamic analysis of a multi-shaft helical gear transmission by ˉnite elements: Model and experiment [J].Journal of Vibrations and Acoustics, 2004, 126(3):398-406.
|
[11] |
CHENG Y P, LIM T C. Dynamics of hypoid geartransmission with nonlinear time-varying mesh characteristics [J]. Journal of Mechanical Design, 2003,125(2): 373-382.
|
[12] |
FAKHFAKH T, CHAARI F, HADDAR M. Numerical and experimental analysis of a gear system withteeth defects [J]. The International Journal of Advanced Manufacturing Technology, 2005, 25(5/6): 542-550.
|
[13] |
PARKER R G, AGASHE V, VIJAYAKAR S M. Dy-namic response of a planetary gear system using a ˉ-nite element/contact mechanics model [J]. Journal ofMechanical Design, 1999, 122(3): 304-310.
|
[14] |
HOUSER D R, BLANKENSHIP G W. Methods formeasuring gear transmission error under load and atoperating speeds [J]. SAE Transactions, 1989, 98(6):1367-1374.
|
[15] |
SWEENEY P J, RANDALL R B. Gear transmis-sion error measurement using phase demodulation[J]. Journal of Mechanical Engineering Science, 1996,210(3): 201-213.
|
[16] |
REMOND D. Practical performances of high-speedmeasurement of gear transmission error or torsionalvibrations with optical encoders [J]. Measurement Sci-ence and Technology, 1998, 9(3): 347-353.
|
[17] |
CHOY F K, TU Y K, SAVAGE M, et al. Vibrationsignature and modal analysis of multi-stage gear trans-mission [J]. Journal of the Franklin Institute, 1991,328(2/3): 281-298.
|
[18] |
DU S, RANDALL R B, KELLY D W. Modelling ofspur gear mesh sti?ness and static transmission error[J]. Journal of Mechanical Engineering Science, 1998,212(4): 287-297.
|
[19] |
XIA J Q, LIU Y Y, GENG C M, et al. Noncircu-lar bevel gear transmission with intersecting axes [J].Journal of Mechanical Design, 2008, 130(5): 054502.
|
[20] |
WANG Y, ZHANG W J. Stochastic vibration modelof gear transmission systems considering speed-dependent random errors [J]. Nonlinear Dynamics,1998, 17(2): 187-203.
|
[21] |
GUO X L. Study on the structure reliability of the ˉl-tering gear reducer [M]. Chongqing: Chongqing Uni-versity, 2010 (in Chinese).
|
[22] |
MI J H, LI Y F, YANG Y J, et al. Reliability as-sessment of complex electromechanical systems underepistemic uncertainty [J]. Reliability Engineering andSystem Safety, 2016, 152: 1-15.
|
[23] |
MI J H, LI Y F, LIU Y, et al. Belief universal gen-erating function analysis of multi-state systems underepistemic uncertainty and common cause failures [J].IEEE Transactions on Reliability, 2015, 64(4): 1300-1309.
|
[24] |
LI Z H, MALIK O P. An orthogonal test approachbased control parameter optimization and its applica-tion to a hydro-turbine governor [J]. IEEE Transac-tions on Energy Conversion, 1997, 12(4): 388-393.
|
[25] |
GROSSMAN E, GOUZMAN I. Space environment ef-fects on polymers in low earth orbit [J]. Nuclear In-struments and Methods in Physics Research Section B,2003, 208: 48-57.
|
[26] |
BAUD S, VELEX P. Static and dynamic tooth load-ing in spur and helical geared systems-experiments andmodel validation [J]. Journal of Mechanical Design,2002, 124(2): 334-346.
|
[27] |
LI R F, WANG J J. Dynamics of gear system: Vibra-tion, shock and noise [M]. Beijing: Science Press, 1997(in Chinese).
|
[28] |
QU W D, TANG H L. Handbook of mechanical vi-bration [M]. Beijing: China Machine Press, 2000 (inChinese).
|
[29] |
DROLSHAGEN G. Impact e?ects from small size me-teoroids and space debris [J]. Advances in Space Re-search, 2008, 41(7): 1123-1131.
|
[30] |
DEUFLHARD P, KRAUSE R, ERTEL S. A contact-stabilized Newmark method for dynamical contactproblems [J]. International Journal for NumericalMethods in Engineering, 2008, 73(9): 1274-1290.
|
[31] |
HU Z, DU X P. Time-dependent reliability analysisby a sampling approach to extreme values of stochas-tic processes [C]//Proceedings of the ASME 2012 In-ternational Design Engineering Technical Conferences& Computers and Information in Engineering Confer-ence. Chicago, IL, USA: ASME, 2012: 1075-1086.
|
[32] |
WANG Z Q, WANG P F. A nested extreme responsesurface approach for time-dependent reliability-baseddesign optimization [J]. Journal of Mechanical Design,2012, 134(12): 121007.
|