Abstract: Cam-rotor vane motor (CRVM) is one of the new continuous hydraulic servo motors with the characteristics of no pulsation of instantaneous flow rate and output torque, small volume and rotating inertia. It is one of the appropriate actuators for hydraulic servo system which has good dynamic and steady-state performance requirements. The ideal output torque of CRVM is pulseless, but the actual output torque of CRVM is pulsating. This is caused by the disturbing torque of contact components, especially the friction between vane and cam-rotor. In order to get better performance of CRVM, which means more stable output torque and smaller disturbing torque, we discuss four kinds of vane end faces (VEFs). Analytic formulae of the normal contact force and the disturbing torque caused by the vane are derived from systematical force analysis. The normal contact force and the disturbing torque vary through a period under different VEF, and the reduced oil pressure is simulated in this paper. The simulation shows that the VEF with the proper round and reduced oil pressure can significantly decrease the disturbing torque and get better servo performance. The experiment results verify the correctness of the theoretical analysis and simulation. © 2016, Shanghai Jiaotong University and Springer-Verlag Berlin Heidelberg.

Key words: cam-rotor vane motor (CRVM); disturbing torque; normal contact force; reduced oil pressure; servo performance; vane end face (VEF)