Journal of shanghai Jiaotong University (Science) ›› 2014, Vol. 19 ›› Issue (3): 325-336.doi: 10.1007/s12204-014-1506-6

Previous Articles     Next Articles

Shafting Coupled Vibration Research Based on Wave Approach

Shafting Coupled Vibration Research Based on Wave Approach

YANG Yong1,2 (杨勇), CHE Chi-dong1* (车驰东), TANG Wen-yong1 (唐文勇)   

  1. (1. State Key Laboratory of Ocean Engineering, Shanghai Jiaotong University, Shanghai 200240, China; 2. Marine Design & Research Institute of China, Shanghai 200011, China)
  2. (1. State Key Laboratory of Ocean Engineering, Shanghai Jiaotong University, Shanghai 200240, China; 2. Marine Design & Research Institute of China, Shanghai 200011, China)
  • Online:2014-06-30 Published:2014-07-15
  • Contact: CHE Chi-dong(车驰东) E-mail:churchdoor@sjtu.edu.cn

Abstract: Because of propeller hydrodynamic influence, the shafting vibration is a coupled vibration which includes torsional, longitudinal and whirling vibrations. It is unsuitable to analyze different vibrations of propulsive shafting systems with development of shipbuilding technologies. To overcome the shortages of traditional marine standards, we establish a new numerical model of the shafting coupled vibration. And we put forward shafting coupled vibration calculation to ensure better reliability of main propulsion system. The shafting system is modeled into two sub-systems, a continuous one and a discrete one. Wave approach and transit matrix method are used to investigate displacement and stress fields in continuous and discrete sub-systems, respectively. And vibrations of different modes in both sub-systems are coupled by using dynamic equilibrium and continuity condition to deduce the global equations governing the motion of shafting. The coupling calculation is then used to research the reason of a very large crude carrier (VLCC) stern hull vibration. It is shown by the comparison of the results from both coupling and dependent vibration calculations that vibration in deferent directions will cause deformation in the same mode, which leads to extra stress and displacements on shafting, especially as the resonant frequencies of different vibration modes match each other. This is helpful to prevent ship stern vibration due to poor shafting vibration calculation.

Key words: shafting|coupled vibration| wave approach| resonance

摘要: Because of propeller hydrodynamic influence, the shafting vibration is a coupled vibration which includes torsional, longitudinal and whirling vibrations. It is unsuitable to analyze different vibrations of propulsive shafting systems with development of shipbuilding technologies. To overcome the shortages of traditional marine standards, we establish a new numerical model of the shafting coupled vibration. And we put forward shafting coupled vibration calculation to ensure better reliability of main propulsion system. The shafting system is modeled into two sub-systems, a continuous one and a discrete one. Wave approach and transit matrix method are used to investigate displacement and stress fields in continuous and discrete sub-systems, respectively. And vibrations of different modes in both sub-systems are coupled by using dynamic equilibrium and continuity condition to deduce the global equations governing the motion of shafting. The coupling calculation is then used to research the reason of a very large crude carrier (VLCC) stern hull vibration. It is shown by the comparison of the results from both coupling and dependent vibration calculations that vibration in deferent directions will cause deformation in the same mode, which leads to extra stress and displacements on shafting, especially as the resonant frequencies of different vibration modes match each other. This is helpful to prevent ship stern vibration due to poor shafting vibration calculation.

关键词: shafting|coupled vibration| wave approach| resonance

CLC Number: