Semirigid Analysis of Extended End Plate Connections Based on
Correlation and Sensitivity

doi:10.1007/s12204-012-1331-8

Abstract

Abstract: Traditionally, semi-rigid analysis of extended end plate connections is assumed to be deterministic parameters. Most of the moment-rotation models of the joint are determined by curve-fitting and statistically regressed with the test data. Parameters of these models have little physical meaning, and the effect of correlations in the parameters is neglected. This paper deals with a semi-rigid joint of extended end plate connections based on correlation and sensitivity analysis. A numerical study was carried out and the finite element analysis was validated compared with the experimental results. The relative moment-rotation model was concluded based on correlations in parameters and probabilistic sentivity analysis. The relationship between height and width of steel beam was partial correlation. The relationship between thickness of steel beam flange and thickness of steel beam web was also partial correlation. Height and width of steel beam, and distance of upper bolts to axle wire of steel beam section were important sensitive parameters for the extended end plate connections.

Key words: semi-rigid| extended end plate| correlation| sensitive parameter

摘要： Traditionally, semi-rigid analysis of extended end plate connections is assumed to be deterministic parameters. Most of the moment-rotation models of the joint are determined by curve-fitting and statistically regressed with the test data. Parameters of these models have little physical meaning, and the effect of correlations in the parameters is neglected. This paper deals with a semi-rigid joint of extended end plate connections based on correlation and sensitivity analysis. A numerical study was carried out and the finite element analysis was validated compared with the experimental results. The relative moment-rotation model was concluded based on correlations in parameters and probabilistic sentivity analysis. The relationship between height and width of steel beam was partial correlation. The relationship between thickness of steel beam flange and thickness of steel beam web was also partial correlation. Height and width of steel beam, and distance of upper bolts to axle wire of steel beam section were important sensitive parameters for the extended end plate connections.

关键词: semi-rigid| extended end plate| correlation| sensitive parameter

CLC Number:

TU 311

PAN Jian-rong (潘建荣), WANG Zhan* (王湛), ZHENG Lin-qiang (郑霖强),LIN Zi-xing (林梓兴), HE Yi-ming (何一鸣), ZHU Qing-ling (朱庆玲). Semirigid Analysis of Extended End Plate Connections Based on Correlation and Sensitivity[J]. Journal of shanghai Jiaotong University (Science), 2012, 17(5): 598-604.

References

[1] Wu F H. Semi-rigid connection in steel frames [D].Purdue: College of Engineering, Purdue University,1989.

[2] Chen W F, Lui E M. Stability design of steel frames [M]. Zhou Sui-ping (trans.). Shanghai: World Publishing Corporation, 1999 (in Chiese).

[3] Martin R. The opposable mind [M]. Boston: Harvard Business School Press, 2007.

[4] Coelho A M G, Bijlaard F S K, Da Silva L S. Experimental assessment of the ductility of extended end plate connections [J]. Engineering Structures, 2004,26: 1185-1206.

[5] Coelho A M G, Bijlaard F S K. Experimental behaviour of high strength steel end-plate connections [J]. Journal of Constructional Steel Research, 2007, 63:1228-1240.

[6] Ono K. Strain-hardening equations and uniform strain [J]. Metallurgical Transactions, 1972, 3: 749-751.

[7] Coelho A M G, Bijlaard F S K, Gresnigt N, et al.Experimental assessment of the behaviour of bolted Tstud connections made up of welded plates [J]. Journal of Constructional Steel Research, 2004, 60: 269-311.
[8] Coelho A M G. Characterization of the ductility of bolted end plate beam-to-column steel connections [D].Coimbra: University of Coimbra, 2004.

[9] Goto Y, Miyashita S. Classification system for rigid and semirigid connections [J]. Journal of Structural Engineering, 1998, 124: 750-757.

[10] Kim S E, Choi S H. Practical advanced analysis for semi-rigid space frames [J]. International Journal of Solids and Structures, 2001, 38: 9111-9131.

[11] Kishi N, Chen W F, Goto Y, et al. Behavior of tall buildings with mixed use of rigid and semi-rigid connections [J]. Computers & Structures, 1996, 61: 1193-1206.

[12] Attigbe E, Morris G. Moment-rotation function for steel connections [J]. Journal of Structural Engineering,1991, 117: 1703-1718.

[13] Reyes-Salazar A, Haldar A. Nonlinear seismic response of steel structures with semi-rigid and composite connections [J]. Journal of Constructional Steel Research,1999, 51: 37-59.

[14] Wang Z, Pan J R, Yuan J X. The study on semirigid joint of steel-concrete composite beam to CFST column [J]. Advanced Steel Construction, 2009, 5(4):421-431.

[15] Pan Jian-rong. Analytical method on semi-rigid joint of framework based on correlations [D]. Shantou: College of Engineering, Shantou University, 2009 (in Chinese).

[16] Zhong Shan-tong. The concrete-filled steel tubular structures [M]. Beijing: Tsinghua University Press,2004 (in Chinese).

[17] Bjorhovde R, Colson A, Brozzetti J. Classification system for beam-to-column connections [J]. Journal of Structural Engineering, 1990, 116: 3059-3076.
[18] Hasan R, Kishi N, Chen W F. A new nonlinear connection classification system [J]. Journal of Constructional Steel Research, 1998, 47: 119-140.

Semirigid Analysis of Extended End Plate Connections Based on Correlation and Sensitivity

Semirigid Analysis of Extended End Plate Connections Based on Correlation and Sensitivity

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	YANG Mengjie, REN Haojie, REN Hao, XU Yuwang, ZHANG Mengmeng. Damage Monitoring Method for Deep-Sea Net Cage Rope Structure Based on Tension Signal [J]. Journal of Shanghai Jiao Tong University, 2025, 59(4): 550-560.
[2]	Zhu Fangtao, Wang Quanbao, Xie Weicheng, Duan Dengping. Adjusting Accuracy of Digital Image Correlation Through Variable Subsets and Application in Airship Envelope [J]. J Shanghai Jiaotong Univ Sci, 2025, 30(2): 239-251.
[3]	SUN Xin, WANG Simin, XIE Jingdong, JIANG Hailin, WANG Sen. Improved Transformer-PSO Short-Term Electricity Price Prediction Method Considering Multidimensional Influencing Factors [J]. Journal of Shanghai Jiao Tong University, 2024, 58(9): 1420-1431.
[4]	TIAN Ye, YU Moduo, HUANG Wentao, TAI Nengling, NIU Lu. Degaussing Coil Deployment and Degaussing Current Optimization Strategy for Ship Partition Based on Tilted Correlation Screening [J]. Journal of Shanghai Jiao Tong University, 2024, 58(7): 1018-1026.
[5]	WANG Jinxiao¹ (王进潇), CHENG Bin^{1, 2, 3∗} (程斌), XIANG Sheng¹ (向升), LI Sida¹ (李思达), YAN Xingfei⁴ (闫兴非). Static and Fatigue Behavior of Hybrid Bonded/Bolted Glass Fiber Reinforced Polymer Joints Under Tensile Loading [J]. J Shanghai Jiaotong Univ Sci, 2024, 29(5): 817-830.
[6]	LYU Tao, CHEN Jing, XUE Shanye. Joint Analysis of Product Indicators Based on Multi-Source and Multi-Modal Data in Discrete Manufacturing [J]. Air & Space Defense, 2024, 7(5): 110-119.
[7]	CHENG Xiangwei, ZHANG Daxu, DU Yonglong, GUO Hongbao, HONG Zhiliang. In-Situ X-Ray CT Characterization of Damage Mechanism of Plain Weave SiC_f/SiC Composites Under Compression [J]. Journal of Shanghai Jiao Tong University, 2024, 58(2): 232-241.
[8]	HUANG Junxian, CHEN Chun, CAO Yijia, QUAN Shaoli, WANG Yi. Distribution Network Fault Risk Assessment Method Considering Difference in Entropy Value of Rare Factors [J]. Journal of Shanghai Jiao Tong University, 2024, 58(12): 1857-1867.
[9]	JIANG Yi, FU Juncheng, LI Zewen, ZHANG Yuqing, YIN Jungang, YAO Jiangang. A Comprehensive Evaluation Model of Buildings Based on Improved TOPSIS [J]. Journal of Shanghai Jiao Tong University, 2023, 57(7): 868-877.
[10]	ZENG Zhirian(曾志贤),CAO Jianjun*(曹建军),WENG Nianfeng(翁年凤)，YUAN Zhen(袁震)，YU Xu(余旭). Cross-Modal Entity Resolution for Image and Text Integrating Global and Fine-Grained Joint Attention Mechanism [J]. J Shanghai Jiaotong Univ Sci, 2023, 28(6): 728-737.
[11]	CAO Xiangang1,2(曹现刚)，LEI Zhuol*(雷卓)，LI Yanchuan1(李彦川), ZHANG Mengyuan1(张梦园),DUAN Xinyu1(段欣宇). Prediction Method of Equipment Remaining Life Based on Self-Attention Long Short-Term Memory Neural Network [J]. J Shanghai Jiaotong Univ Sci, 2023, 28(5): 652-664.
[12]	HOU Liangsheng(侯良生),ZHANG Jundong*(张均东). Fault Diagnosis for Rolling Element Bearing in Dataset Bias Scenario [J]. J Shanghai Jiaotong Univ Sci, 2023, 28(5): 638-651.
[13]	WANG Yuehan, NAN Xiaohong, OUYANG Hongsheng, GUO Zhikai, HU Bin, WANG Ruzhu. Matching Characteristics of Expansion Valve Opening and Flow Rate of High Temperature Heat Pump with Green Refrigerant HP-1 [J]. Journal of Shanghai Jiao Tong University, 2023, 57(10): 1367-1377.
[14]	GU Bo, DU Zhongxing, ZENG Weijie, TIAN Zhen, ZHANG Zhiting. Flow Boiling Heat Transfer Coefficient and Frictional Pressure Drop Correlations for R32 [J]. Journal of Shanghai Jiao Tong University, 2023, 57(1): 45-54.
[15]	PANG Na1 (庞娜), LUO Wenguang1∗ (罗文广), WU Ruoyuan1 (吴若园), LAN Hongli1 (蓝红莉), QIN Yongxin1 (覃永新), SU Qi2 (苏琦). Safety Evaluation of Commercial Vehicle Driving Behavior Based on AHP-CRITIC Algorithm [J]. J Shanghai Jiaotong Univ Sci, 2023, 28(1): 126-135.