Effects of Micro-Milling and Laser Engraving on Processing Quality and Implantation Mechanics of PEG-Dexamethasone Coated Neural Probe

doi:10.1007/s12204-020-2243-7

J Shanghai Jiaotong Univ Sci ›› 2021, Vol. 26 ›› Issue (1): 1-9.doi: 10.1007/s12204-020-2243-7

• • 下一篇

Effects of Micro-Milling and Laser Engraving on Processing Quality and Implantation Mechanics of PEG-Dexamethasone Coated Neural Probe

CZHOU Xuhui (周旭辉), ZHANG Wenguang (张文光), XIE Jie (谢颉)

(State Key Laboratory of Mechanical System and Vibration, School of Mechanical Engineering,

Shanghai Jiao Tong University, Shanghai 200240, China)

出版日期:2021-02-28 发布日期:2021-01-19
通讯作者: ZHANG Wenguang (张文光) E-mail:zhwg@sjtu.edu.cn

Effects of Micro-Milling and Laser Engraving on Processing Quality and Implantation Mechanics of PEG-Dexamethasone Coated Neural Probe

ZHOU Xuhui (周旭辉), ZHANG Wenguang (张文光), XIE Jie (谢颉)

(State Key Laboratory of Mechanical System and Vibration, School of Mechanical Engineering,

Shanghai Jiao Tong University, Shanghai 200240, China)

Online:2021-02-28 Published:2021-01-19
Contact: ZHANG Wenguang (张文光) E-mail:zhwg@sjtu.edu.cn

摘要/Abstract

摘要： Compared with stiff silicon-based probes, flexible neural probes can alleviate biological inflammation and tissue rejection. A polyethylene glycol (PEG) coating can facilitate the insertion of flexible probes, and the fabrication methods have a significant impact on the dimensional accuracy and structural strength of the coating. In this study, a novel melting injection moulding method is used to process a PEG-dexamethasone (PEG-DEX) coating with high structural strength for a type of mesh-shaped photosensitive polyimide (PSPI) based neural probe. Combined with the digital image correlation (DIC) method, an in vitro test system with high accuracy is developed to evaluate the effects of the elastic modulus of the PEG component and two fabrication methods, i.e., computer-numerical-control (CNC) micro-milling and laser engraving, on the processing quality and implantation mechanics of a PEG-DEX coated probe. The results show that compared with laser engraving, CNC micro-milling can ensure high dimensional accuracy and sharpness for the composite coating, thus leading to small damage from implantation, whereas the elastic modulus of the composite coating has a limited effect on the implantation mechanics of the PEG-DEX coated probe.

关键词: flexible neural probe, composite coating, digital image correlation (DIC), polyethylene glycol (PEG), dexamethasone (DEX), insertion force, implantation injury

Abstract: Compared with stiff silicon-based probes, flexible neural probes can alleviate biological inflammation and tissue rejection. A polyethylene glycol (PEG) coating can facilitate the insertion of flexible probes, and the fabrication methods have a significant impact on the dimensional accuracy and structural strength of the coating. In this study, a novel melting injection moulding method is used to process a PEG-dexamethasone (PEG-DEX) coating with high structural strength for a type of mesh-shaped photosensitive polyimide (PSPI) based neural probe. Combined with the digital image correlation (DIC) method, an in vitro test system with high accuracy is developed to evaluate the effects of the elastic modulus of the PEG component and two fabrication methods, i.e., computer-numerical-control (CNC) micro-milling and laser engraving, on the processing quality and implantation mechanics of a PEG-DEX coated probe. The results show that compared with laser engraving, CNC micro-milling can ensure high dimensional accuracy and sharpness for the composite coating, thus leading to small damage from implantation, whereas the elastic modulus of the composite coating has a limited effect on the implantation mechanics of the PEG-DEX coated probe.

Key words: flexible neural probe, composite coating, digital image correlation (DIC), polyethylene glycol (PEG), dexamethasone (DEX), insertion force, implantation injury

中图分类号:

R 318.01

ZHOU Xuhui (周旭辉), ZHANG Wenguang (张文光), XIE Jie (谢颉). Effects of Micro-Milling and Laser Engraving on Processing Quality and Implantation Mechanics of PEG-Dexamethasone Coated Neural Probe[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 1-9.

参考文献 18

[1]	DONOGHUE J P. Bridging the brain to the world:A perspective on neural interface systems [J]. Neuron,2008, 60(3): 511-521.
[2]	KOZAI T D Y, JAQUINS-GERSTL A S, VAZQUEZ A L, et al. Brain tissue responses to neural implants impact signal sensitivity and intervention strategies [J].ACS Chemical Neuroscience, 2015, 6(1): 48-67.
[3]	LECOMTE A, DESCAMPS E, BERGAUD C. A review on mechanical considerations for chronicallyimplanted neural probes [J]. Journal of Neural Engineering,2018, 15: 031001.
[4]	ZHOU T, HONG G S, FU T M, et al. Syringeinjectable mesh electronics integrate seamlessly with minimal chronic immune response in the brain [J]. Proceedings of the National Academy of Sciences of the United States of America, 2017, 114(23): 5894-5899.
[5]	ORTIGOZA-DIAZ J, SCHOLTEN K, LARSON C, et al. Techniques and considerations in the microfabrication of Parylene C microelectromechanical systems [J].Micromachines, 2018, 9(9): 422.
[6]	CEYSSENS F, WELKENHUYSEN M, PUERS R. Anisotropic etching in (3 1 1) Si to fabricate sharp resorbable polymer microneedles carrying neural electrode arrays [J]. Journal of Micromechanics and Microengineering,2019, 29: 027001.
[7]	LECOMTE A, CASTAGNOLA V, DESCAMPS E, et al. Silk and PEG as means to stiffen a parylene probe for insertion in the brain: Toward a double time-scale tool for local drug delivery [J]. Journal of Micromechanics and Microengineering, 2015, 25: 125003.
[8]	WELTMAN A, YOO J, MENG E. Flexible, penetrating brain probes enabled by advances in polymer microfabrication [J]. Micromachines, 2016, 7(10): 180.
[9]	XIANG Z L, YEN S C, XUE N, et al. Ultra-thin flexible polyimide neural probe embedded in a dissolvable maltose-coated microneedle [J]. Journal of Micromechanics and Microengineering, 2014, 24(6): 065015.
[10]	TIEN LW, WU F, TANG-SCHOMERMD, et al. Silk as a multifunctional biomaterial substrate for reduced glial scarring around brain-penetrating electrodes [J].Advanced Functional Materials, 2013, 23(25): 3185-3193.
[11]	BEDIZ B, KORKMAZ E, KHILWANI R, et al. Dissolvable microneedle arrays for intradermal delivery of biologics: Fabrication and application [J]. Pharmaceutical Research, 2014, 31(1): 117-135.
[12]	TAKMAKOV P, RUDA K, PHILLIPS S K, et al.Rapid evaluation of the durability of cortical neural implants using accelerated aging with reactive oxygen species [J]. Journal of Neural Engineering, 2015, 12(2):026003.
[13]	MESA-M′UNERA E, RAM′IREZ-SALAZAR J F,BOULANGER P, et al. Inverse-FEM characterization of a brain tissue phantom to simulate compression and indentation [J]. Ingenier′?a y Ciencia, 2012, 8(16): 11-36.
[14]	TANG J Q, ZHANG W G, CAI F L, et al. A comparative study on tissue injury caused by implantation based on electrode with the capability of micro-motion attenuation [J]. Journal of Shanghai Jiao Tong University,2018, 52(2): 188-193 (in Chinese).
[15]	ZHANGWG, MA Y K, LI ZW. Experimental evaluation of neural probe’s insertion induced injury based on digital image correlation method [J]. Medical Physics,2016, 43(1): 505-512.
[16]	ZHANG W G, TANG J Q, LI Z W, et al. A novel neural electrode with micro-motion-attenuation capability based on compliant mechanisms: Physical design concepts and evaluations [J]. Medical & Biological Engineering & Computing, 2018, 56(10): 1911-1923.
[17]	JEE A Y, LEE H, LEE Y, et al. Determination of the elastic modulus of poly(ethylene oxide) using a photoisomerizing dye [J]. Chemical Physics, 2013, 422: 246-250.
[18]	LEE H C, EJSERHOLM F, GAIRE J, et al. Histological evaluation of flexible neural implants; flexibility limit for reducing the tissue response? [J]. Journal of Neural Engineering, 2017, 14(3): 036026.

Effects of Micro-Milling and Laser Engraving on Processing Quality and Implantation Mechanics of PEG-Dexamethasone Coated Neural Probe

Effects of Micro-Milling and Laser Engraving on Processing Quality and Implantation Mechanics of PEG-Dexamethasone Coated Neural Probe

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献 18

相关文章 4

编辑推荐

Metrics

本文评价

[1]	CHENG Rongshan, (程荣山), JIANG Ziang, (蒋子昂), DIMITRIOU Dimitris, GONG Weihua, (龚伟华), TSAI Tsung-Yuan, (蔡宗远). Biomechanical Analysis of Personalised 3D-Printed Clavicle Plates of Different Materials to Treat Midshaft Clavicle Fractures[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(3): 259-266.
[2]	FENG Qiping (冯齐平), CHU Fengting (储沨婷), CHEN Rongjing (陈荣敬), PAN Xiaogang (潘晓岗). Effects of Mandibular Extractions with Clear Aligners: A Finite Element Analysis[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(3): 377-382.
[3]	PAN Shengxuan (潘晟轩), ZOU Diyang (邹第洋), PAN Xiaogang(潘晓岗), TSAI Tsung-Yuan (蔡宗远). Effect of Attachment on Movement Control of the Central Incisor Using Invisible Orthodontics: In-Silico Finite Element Analysis[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(3): 383-390.
[4]	LUO Mai-sheng1 (罗买生), XIE Hong-zhi2 (谢洪智), XIE Le3 (谢叻),CAI Ping4 (蔡萍), GU Li-xu. Robust and Real-Time Guidewire Simulation Based on Kirchhoff Elastic Rod for Vascular Intervention Training[J]. 上海交通大学学报（英文版）, 2014, 19(5): 624-629.