Reliability Analysis of Aero-Engine Main Fuel System Based on GO Methodology

doi:10.1007/s12204-018-1986-x

Journal of Shanghai Jiao Tong University (Science) ›› 2018, Vol. 23 ›› Issue (6): 770-775.doi: 10.1007/s12204-018-1986-x

Reliability Analysis of Aero-Engine Main Fuel System Based on GO Methodology

ZHANG Sheng (张生), REN Chenhui (任晨辉), WAN Liyong (万里勇), YI Xiaojian (伊枭剑), DONG Haiping (董海平)

(1. Shenyang Engine Research Institute, Aero Engine Corporation of China, Shenyang 110015, China; 2. School of Mechatronical Engineering, Beijing Institute of Technology, Beijing 100081, China; 3. China North Vehicle Research Institute, China North Industries Group Corporation Limited, Beijing 100072, China)

出版日期:2018-12-01 发布日期:2018-12-07
通讯作者: DONG Haiping (董海平) E-mail:donghaipingphd@126.com

Reliability Analysis of Aero-Engine Main Fuel System Based on GO Methodology

ZHANG Sheng (张生), REN Chenhui (任晨辉), WAN Liyong (万里勇), YI Xiaojian (伊枭剑), DONG Haiping (董海平)

(1. Shenyang Engine Research Institute, Aero Engine Corporation of China, Shenyang 110015, China; 2. School of Mechatronical Engineering, Beijing Institute of Technology, Beijing 100081, China; 3. China North Vehicle Research Institute, China North Industries Group Corporation Limited, Beijing 100072, China)

Online:2018-12-01 Published:2018-12-07
Contact: DONG Haiping (董海平) E-mail:donghaipingphd@126.com

摘要/Abstract

摘要： To improve the reliability of an aero-engine main fuel system, the quantitative and qualitative reliability analysis of the system is conducted based on goal oriented (GO) methodology. The quantitative reliability analysis results and the minimum cut sets of the fuel system are obtained, respectively. These results are compared with the results of the FTA (Fault Tree Analysis) method, and the comparison result shows GO method is rational and applicable. Therefore, it is feasible to apply the GO method in the reliability analysis of an aero-engine main fuel system.

关键词: aero-engine main fuel system , reliability analysis , GO methodology , fault tree analysis

Abstract: To improve the reliability of an aero-engine main fuel system, the quantitative and qualitative reliability analysis of the system is conducted based on goal oriented (GO) methodology. The quantitative reliability analysis results and the minimum cut sets of the fuel system are obtained, respectively. These results are compared with the results of the FTA (Fault Tree Analysis) method, and the comparison result shows GO method is rational and applicable. Therefore, it is feasible to apply the GO method in the reliability analysis of an aero-engine main fuel system.

Key words: aero-engine main fuel system , reliability analysis , GO methodology , fault tree analysis

中图分类号:

TK 402

ZHANG Sheng (张生), REN Chenhui (任晨辉), WAN Liyong (万里勇), YI Xiaojian (伊枭剑), DONG . Reliability Analysis of Aero-Engine Main Fuel System Based on GO Methodology[J]. Journal of Shanghai Jiao Tong University (Science), 2018, 23(6): 770-775.

ZHANG Sheng (张生), REN Chenhui (任晨辉), WAN Liyong (万里勇), YI Xiaojian (伊枭剑), DONG Haiping (董海平). Reliability Analysis of Aero-Engine Main Fuel System Based on GO Methodology[J]. Journal of Shanghai Jiao Tong University (Science), 2018, 23(6): 770-775.

参考文献 18

[1]	GAO S L, ZHANG S Y, LUO L, et al. Semi-physicalsimulation experiment system of fuel control system foran aeroengine [J]. Advanced Materials Research, 2012,468-471: 2495-2498.
[2]	CHEN N T, MA T,WANG J, et al. Aviation engine foilleakage fault analysis based on fuzzy fault tree theory[J]. Computer Measurement & Control, 2016, 24(6):64-67.
[3]	LIU Y, ZHANG T H, ZHOU J. Fault diagnosis andsemi-physical simulation for actuator and sensor ofaero-engine fuel regulator [J]. Journal of PropulsionTechnology, 2016, 37(11): 2165-2172 (in Chinese).
[4]	WILLIAMS R L, GATELEY W Y. Use of the GOmethodology to directly generate minimal cut sets[C]//Nuclear System Reliability Engineering and RiskAssessment. Philadelphia, PA, USA: Society for Industrialand Applied Mathematics, 1977: 825-849.
[5]	LI Y Y, YI X J, DENG C L, et al. Reliability analysisof turbocharging system for vehicle engine based onGO method [J]. Vehicle Engine, 2016, (5): 38-42 (inChinese).
[6]	YANG J, ZHAO C, ZHU A, et al. Reliability estimationfor the braking systems of high-speed electricmultiple units based on Bayes inference and the GOmethod [J]. Journal of Computational & TheoreticalNanoscience, 2016, 13(2): 1314-1322.
[7]	LI Z, YANG X M, LU Z X. Failure rate analysis ofmulti-state repairable system based on GO methodology[J]. Atomic Energy Science and Technology, 2011,45(11): 1340-1345 (in Chinese).
[8]	LIU L L, REN Y, WANG Z L, et al. Algorithm basedon Bayesian networks for GO methodology [J]. SystemsEngineering and Electronics, 2015, 37(1): 212-218 (inChinese).
[9]	YI X J, DONG H P, SHI J, et al. Reliability analysisof hydraulic transmission oil supply system consideringmaintenance correlation of parallel structure basedon GO methodology [C]//Proceedings of the 10th InternationalConference on Reliability, Maintainabilityand Safety. Guangzhou, China: IEEE, 2015: 508-513.
[10]	CAI G Q, ZHOU L M, LI X, et al. Reliability analysisof urban rail transit vehicle’s door system based on GOmethod [J]. Journal of Southwest Jiaotong University,2011, 46(2): 264-270 (in Chinese).
[11]	YI X J, DHILLON B S, DONG H P, et al. Quantitativereliability analysis of repairable systems withclosed-loop feedback based on GO methodology [J].Journal of the Brazilian Society of Mechanical Sciencesand Engineering, 2017, 39(5): 1845-1858.
[12]	YI X J, SHI J, MU H N, et al. Reliability analysisof hydraulic steering system with DICLFL consideringshutdown correlation based on GO methodology[C]//Proceedings of the First International Conferenceon Reliability Systems Engineering. Beijing, China:IEEE, 2016: 1-6.
[13]	YI X J, DHILLON B S, SHI J, et al. A new reliabilityanalysis method for vehicle systems based ongoal-oriented methodology [J]. Proceedings of the Institutionof Mechanical Engineers, Part D: Journal ofAutomobile Engineering, 2017, 231(8): 1066-1095.
[14]	ZHOU L G, DONG H P, YI X J, et al. Reliability Analysisof Retracting Actuator with Multi-State Based onGoal Oriented Methodology [J]. Journal of ShanghaiJiao Tong University, 2015, 20(3): 307-311.
[15]	YI X J, DHILLON B S, SHI J, et al. Reliability optimizationallocation method for multifunction systemswith multi-state units based on goal oriented methodology[J]. ASCE-ASME Journal of Risk and Uncertaintyin Engineering Systems, Part B: Mechanical Engineering,2016, 3(4): 1-9.
[16]	FAN D M, REN Y, LIU L L, et al. Algorithm based-ondynamic Bayesian networks for repairable GO methodologymodel [J]. Journal of Beijing University of Aeronauticsand Astronautics, 2015: 41(11): 2166-2176 (inChinese).
[17]	YI X J, SHI J, MU H N, et al. Reliability analysisof repairable system with multiple-input and multifunctioncomponent based on goal-oriented methodology[J]. ASCE-ASME Journal of Risk and Uncertaintyin Engineering Systems, Part B: Mechanical Engineering,2017, 3(1): 1-6.
[18]	SHEN Z P, HUANG X R. Principle and applicationof GO methodology [M]. Beijing: Tsinghua UniversityPress, 2004 (in Chinese).

Reliability Analysis of Aero-Engine Main Fuel System Based on GO Methodology

Reliability Analysis of Aero-Engine Main Fuel System Based on GO Methodology

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献 18

相关文章 5

编辑推荐

Metrics

本文评价

[1]	XU Jiajun (许家俊), PEI Zhiyuan (裴志远), GUO Lin (郭琳), ZHANG Ruxia (张儒侠), HU Hualang. Reliability Analysis of Cloud Service-Based Applications Through SRGM and NMSPN[J]. Journal of Shanghai Jiao Tong University (Science), 2020, 25(1): 57-64.
[2]	ZHANG Xiaoqiang1 (张小强), GAO Huiying2 (高会英),FU Guozhong1 (付国忠), HUANG Hongzhong1 . Reliability Analysis of Filtering Reducers Considering Temperature Correction and Shock Load of Space[J]. sa, 2018, 23(3): 456-.
[3]	WANG Hongdonga (王鸿东), LI Danb* (李丹), YI Honga (易宏). Optimal Allocation of Fleet’s Spare Parts for System Reliability[J]. 上海交通大学学报（英文版）, 2017, 22(6): 664-671.
[4]	ZHOU Lin-gan1 (周琳), DONG Hai-ping1 (董海平), YI Xiao-jian1* (伊枭剑),LI Yuan-yuan2 (李媛. Reliability Analysis of Retracting Actuator with Multi-State Based on Goal Oriented Methodology[J]. 上海交通大学学报（英文版）, 2015, 20(3): 307-311.
[5]	YANG Jie1,2 (杨杰), HUANG Yi1,2(黄一), ZHANG Qi1,2 (张崎), ZHAO De-you1 (赵德有). Method of a New Iteration Scheme Combined with Kriging Model for Structural Reliability Evaluation[J]. 上海交通大学学报（英文版）, 2012, 17(4): 415-.