Reliability Analysis of Filtering Reducers Considering Temperature Correction and Shock Load of Space

doi:10.1007/s12204-018-1947-4

摘要/Abstract

摘要： Owing to some excellent properties (such as large transmission ratio, high reliability, high precision, large sti?ness, small volume and long service life), ˉltering reducers are suitable for occasions with high require- ments (e.g. space equipment). However, the tough working condition in space (including frequent changes of temperature, and large temperature di?erence combined with shock loads) may signiˉcantly a?ect the reliability. In this paper, the expressions of the minimal and maximal instantaneous transmission ratios (ITRs) considering temperature correction are developed. The minimal and maximal ITRs from simulation are used to verify the accuracy. Moreover, the reliability of a ˉltering reducer under di?erent temperatures and the shock load are calculated, respectively. The research is beneˉcial to the design of spacecraft mechanism.

关键词: reliability analysis, filtering reducer, temperature correction, shock load

Abstract: Owing to some excellent properties (such as large transmission ratio, high reliability, high precision, large sti?ness, small volume and long service life), ˉltering reducers are suitable for occasions with high require- ments (e.g. space equipment). However, the tough working condition in space (including frequent changes of temperature, and large temperature di?erence combined with shock loads) may signiˉcantly a?ect the reliability. In this paper, the expressions of the minimal and maximal instantaneous transmission ratios (ITRs) considering temperature correction are developed. The minimal and maximal ITRs from simulation are used to verify the accuracy. Moreover, the reliability of a ˉltering reducer under di?erent temperatures and the shock load are calculated, respectively. The research is beneˉcial to the design of spacecraft mechanism.

Key words: reliability analysis, filtering reducer, temperature correction, shock load

中图分类号:

TB 114.3

ZHANG Xiaoqiang1 (张小强), GAO Huiying2 (高会英),FU Guozhong1 (付国忠), HUANG Hongzhong1 . Reliability Analysis of Filtering Reducers Considering Temperature Correction and Shock Load of Space[J]. sa, 2018, 23(3): 456-.

ZHANG Xiaoqiang1 (张小强), GAO Huiying2 (高会英),FU Guozhong1 (付国忠), HUANG Hongzhong1 (黄洪钟). Reliability Analysis of Filtering Reducers Considering Temperature Correction and Shock Load of Space[J]. Journal of Shanghai Jiao Tong University (Science), 2018, 23(3): 456-.

参考文献 32

[1]	HUANG H Z, TIAN Z G, ZUO M J. Multiobjectiveoptimization of three-stage spur gear reduction unitsusing interactive physical programming [J]. Journalof Mechanical Science and Technology, 2005, 19(5):1080-1086.
[2]	RAO S S, TJANDRA M. Reliability-based design ofautomotive transmission systems [J]. Reliability Engineering and System Safety, 1994, 46(2): 159-169.
[3]	SARPER H. Reliability analysis of descent systems ofplanetary vehicles using bivariate exponential distribution [C]//Proceedings of Annual Reliability and Maintainability Symposium. [s.l.]: IEEE, 2005: 165-169.
[4]	CHAARI F, BACCAR W, ABBES M S, et al. Effect of spalling or tooth breakage on gearmesh sti?nessand dynamic response of a one-stage spur gear transmission [J]. European Journal of Mechanics-A/Solids,2008, 27(4): 691-705.
[5]	HOWARD I, JIA S X, WANG J D. The dynamic modelling of a spur gear in mesh including friction and acrack [J]. Mechanical Systems and Signal Processing,2001, 15(5): 831-853.
[6]	MENG Y H, WU C G, LING L P. Mathematical modeling of the transmission performance of 2K-H pin cycloid planetary mechanism [J]. Mechanism and Machine Theory, 2007, 42(7): 776-790.
[7]	CHOY F K, POLYSHCHUK V, ZAKRAJSEK J J, etal. Analysis of the e?ects of surface pitting and wear on the vibration of a gear transmission system [J]. Tribology International, 1996, 29(1): 77-83.
[8]	ANDERSON N E, LOEWENTHAL S H. E?ect of geometry and operating conditions on spur gear systempower loss [J]. Journal of Mechanical Design, 1981,103(1): 151-159.
[9]	TUTTLE T D, SEERING W P. A nonlinear model ofa harmonic drive gear transmission [J]. IEEE Transactions on Robotics and Automation, 1996, 12(3): 368-374.
[10]	KUBUR M, KAHRAMAN A, ZINI D M, et al. Dynamic analysis of a multi-shaft helical gear transmission by ˉnite elements: Model and experiment [J].Journal of Vibrations and Acoustics, 2004, 126(3):398-406.
[11]	CHENG Y P, LIM T C. Dynamics of hypoid geartransmission with nonlinear time-varying mesh characteristics [J]. Journal of Mechanical Design, 2003,125(2): 373-382.
[12]	FAKHFAKH T, CHAARI F, HADDAR M. Numerical and experimental analysis of a gear system withteeth defects [J]. The International Journal of Advanced Manufacturing Technology, 2005, 25(5/6): 542-550.
[13]	PARKER R G, AGASHE V, VIJAYAKAR S M. Dy-namic response of a planetary gear system using a ˉ-nite element/contact mechanics model [J]. Journal ofMechanical Design, 1999, 122(3): 304-310.
[14]	HOUSER D R, BLANKENSHIP G W. Methods formeasuring gear transmission error under load and atoperating speeds [J]. SAE Transactions, 1989, 98(6):1367-1374.
[15]	SWEENEY P J, RANDALL R B. Gear transmis-sion error measurement using phase demodulation[J]. Journal of Mechanical Engineering Science, 1996,210(3): 201-213.
[16]	REMOND D. Practical performances of high-speedmeasurement of gear transmission error or torsionalvibrations with optical encoders [J]. Measurement Sci-ence and Technology, 1998, 9(3): 347-353.
[17]	CHOY F K, TU Y K, SAVAGE M, et al. Vibrationsignature and modal analysis of multi-stage gear trans-mission [J]. Journal of the Franklin Institute, 1991,328(2/3): 281-298.
[18]	DU S, RANDALL R B, KELLY D W. Modelling ofspur gear mesh sti?ness and static transmission error[J]. Journal of Mechanical Engineering Science, 1998,212(4): 287-297.
[19]	XIA J Q, LIU Y Y, GENG C M, et al. Noncircu-lar bevel gear transmission with intersecting axes [J].Journal of Mechanical Design, 2008, 130(5): 054502.
[20]	WANG Y, ZHANG W J. Stochastic vibration modelof gear transmission systems considering speed-dependent random errors [J]. Nonlinear Dynamics,1998, 17(2): 187-203.
[21]	GUO X L. Study on the structure reliability of the ˉl-tering gear reducer [M]. Chongqing: Chongqing Uni-versity, 2010 (in Chinese).
[22]	MI J H, LI Y F, YANG Y J, et al. Reliability as-sessment of complex electromechanical systems underepistemic uncertainty [J]. Reliability Engineering andSystem Safety, 2016, 152: 1-15.
[23]	MI J H, LI Y F, LIU Y, et al. Belief universal gen-erating function analysis of multi-state systems underepistemic uncertainty and common cause failures [J].IEEE Transactions on Reliability, 2015, 64(4): 1300-1309.
[24]	LI Z H, MALIK O P. An orthogonal test approachbased control parameter optimization and its applica-tion to a hydro-turbine governor [J]. IEEE Transac-tions on Energy Conversion, 1997, 12(4): 388-393.
[25]	GROSSMAN E, GOUZMAN I. Space environment ef-fects on polymers in low earth orbit [J]. Nuclear In-struments and Methods in Physics Research Section B,2003, 208: 48-57.
[26]	BAUD S, VELEX P. Static and dynamic tooth load-ing in spur and helical geared systems-experiments andmodel validation [J]. Journal of Mechanical Design,2002, 124(2): 334-346.
[27]	LI R F, WANG J J. Dynamics of gear system: Vibra-tion, shock and noise [M]. Beijing: Science Press, 1997(in Chinese).
[28]	QU W D, TANG H L. Handbook of mechanical vi-bration [M]. Beijing: China Machine Press, 2000 (inChinese).
[29]	DROLSHAGEN G. Impact e?ects from small size me-teoroids and space debris [J]. Advances in Space Re-search, 2008, 41(7): 1123-1131.
[30]	DEUFLHARD P, KRAUSE R, ERTEL S. A contact-stabilized Newmark method for dynamical contactproblems [J]. International Journal for NumericalMethods in Engineering, 2008, 73(9): 1274-1290.
[31]	HU Z, DU X P. Time-dependent reliability analysisby a sampling approach to extreme values of stochas-tic processes [C]//Proceedings of the ASME 2012 In-ternational Design Engineering Technical Conferences& Computers and Information in Engineering Confer-ence. Chicago, IL, USA: ASME, 2012: 1075-1086.
[32]	WANG Z Q, WANG P F. A nested extreme responsesurface approach for time-dependent reliability-baseddesign optimization [J]. Journal of Mechanical Design,2012, 134(12): 121007.