Research on Hydrogen Environment Fatigue Test System and Correlative Fatigue Test of Hydrogen Storage Vessel

doi:10.1007/s12204-013-1463-5

上海交通大学学报（英文版） ›› 2014, Vol. 19 ›› Issue (1): 88-94.doi: 10.1007/s12204-013-1463-5

Research on Hydrogen Environment Fatigue Test System and Correlative Fatigue Test of Hydrogen Storage Vessel

LI Rong1 (李蓉), ZHENG Chuan-xiang1 (郑传祥), CHEN Bing-bing2* (陈冰冰), ZHOU Wei-wei1 (周威威), WANG Liang1 (王亮)

(1. Institute of Chemical Machinery and Process Equipment, Zhejiang University, Hangzhou 310027, China; 2. Institute of Process Equipment and Control Engineering, Zhejiang University of Technology, Hangzhou 310032, China)

出版日期:2014-01-15 发布日期:2014-01-15
通讯作者: CHEN Bing-bing (陈冰冰) E-mail:chenbb@zjut.edu.cn

Research on Hydrogen Environment Fatigue Test System and Correlative Fatigue Test of Hydrogen Storage Vessel

LI Rong1 (李蓉), ZHENG Chuan-xiang1 (郑传祥), CHEN Bing-bing2* (陈冰冰), ZHOU Wei-wei1 (周威威), WANG Liang1 (王亮)

(1. Institute of Chemical Machinery and Process Equipment, Zhejiang University, Hangzhou 310027, China; 2. Institute of Process Equipment and Control Engineering, Zhejiang University of Technology, Hangzhou 310032, China)

Online:2014-01-15 Published:2014-01-15
Contact: CHEN Bing-bing (陈冰冰) E-mail:chenbb@zjut.edu.cn

摘要/Abstract

摘要： A 70MPa hydrogen environment fatigue test system has been designed and applied in the manufacture of a hydrogen storage vessel. Key equipment is the 80MPa flat steel ribbon wound high pressure hydrogen storage vessel. A reasonable stress distribution has been realized, that is low stress in the liner of the pressure vessel and even stress in the flat ribbon layers. This optimal stress distribution is achieved through the adjustment of the prestress in flat steel ribbons. A control system for the fatigue test system has also been designed. It consists of a double control model, i.e. manual control and automatic control, to satisfy different experimental requirements. The system is the unique one that can be used in the real hydrogen environmental fatigue test system in China. An experiment for the 70MPa onboard composite material hydrogen vessel has been carried out on the system. The experimental result from this test is in close agreement with the practical operating conditions.

关键词: hydrogen storage vessel, fatigue, hydrogen environment, experiment

Abstract: A 70MPa hydrogen environment fatigue test system has been designed and applied in the manufacture of a hydrogen storage vessel. Key equipment is the 80MPa flat steel ribbon wound high pressure hydrogen storage vessel. A reasonable stress distribution has been realized, that is low stress in the liner of the pressure vessel and even stress in the flat ribbon layers. This optimal stress distribution is achieved through the adjustment of the prestress in flat steel ribbons. A control system for the fatigue test system has also been designed. It consists of a double control model, i.e. manual control and automatic control, to satisfy different experimental requirements. The system is the unique one that can be used in the real hydrogen environmental fatigue test system in China. An experiment for the 70MPa onboard composite material hydrogen vessel has been carried out on the system. The experimental result from this test is in close agreement with the practical operating conditions.

Key words: hydrogen storage vessel, fatigue, hydrogen environment, experiment

中图分类号:

TH 49

LI Rong1 (李蓉), ZHENG Chuan-xiang1 (郑传祥), CHEN Bing-bing2* (陈冰冰), ZHOU Wei-wei1 . Research on Hydrogen Environment Fatigue Test System and Correlative Fatigue Test of Hydrogen Storage Vessel[J]. 上海交通大学学报（英文版）, 2014, 19(1): 88-94.

LI Rong1 (李蓉), ZHENG Chuan-xiang1 (郑传祥), CHEN Bing-bing2* (陈冰冰), ZHOU Wei-wei1 (周威威), WANG Liang1 (王亮). Research on Hydrogen Environment Fatigue Test System and Correlative Fatigue Test of Hydrogen Storage Vessel[J]. Journal of shanghai Jiaotong University (Science), 2014, 19(1): 88-94.

参考文献

[1] Mao Zong-qiang. Nations quicken pace of developing hydrogen energy market: A brief introduction to WHEC2010 [J]. Sino-Global Energy, 2010, 15(7): 29-34 (in Chinese).
[2] Mori D, Hirose K. Recent challenges of hydrogen storage technologies for fuel cell vehicles [J]. International Journal of Hydrogen Energy, 2009, 34: 4569-4574.
[3] Meng Qing-yun. Thinking about development direction and application of hydrogen in the transportation field in the future [J]. China New Energy, 2010(1): 1-3(in Chinese).
[4] Mao Zong-qiang. Strategic suggestion on developing hydrogen energy-from light green to dark green [J].Solar Energy, 2009(2): 1-4 (in Chinese).
[5] Liu Jiang-hua. Hydrogen energy: Green energy in the future [J]. Modern Chemical Industry, 2006, 26(sup 2):10-15 (in Chinese).
[6] Zheng Chuan-xiang, Yang Fan. Fatigue test system of hydrogen storage vessel [P]. China:CN200810060100.8. 2008-08-06 (in Chinese).
[7] Liu Yu-hu, Xing Ke-li, Wang Zu-lin, et al. The development of gas cylinder pressure cycle test system[J]. Machine Tool & Hydraulics, 2008, 36(6): 88-90 (in Chinese).
[8] Zheng C X, Lei S H. Stresses controllable analysis and optimal design of unique high pressure vessel applied in hydrogen charge station [J]. International Journal of Hydrogen Energy, 2007, 32: 3508-3518.
[9] Zheng C X. Research on reasonable winding angle of ribbons of flat steel ribbon wound pressure vessel [J].Journal of Zhejiang University: Science A, 2006, 7(3):445-449.
[10] Eihusen J A. Application of plastic-lined composite pressure vessels for hydrogen storage [R]. Lincoln, Nebraska:General Dynamics Armament and Technical Products, 2007.
[11] Liu Hao, Tao Guo-liang. Study on air charging process of quick recharge station for air powered vehicle [J].China Mechanical Engineering, 2007, 18(3): 369-373(in Chinese).
[12] Dutton J C, Coverdill R E. Experiments to study the gaseous discharge and filling of vessels [J]. International Journal of Engineering Education, 1997, 13(2),123-134.
[13] Kenneth J, William E, Christopher F. Automated process and system for dispensing compressed natural gas [P]. USA: 5810058. 1998-09-22.
[14] GB/150-1989, Steel pressure vessel [S] (in Chinese).
[15] American Society of Mechanical Engineers Staff.BPVC section X — fiber-reinforced plastic pressure vessels [M]. New York: ASME, 1998

Research on Hydrogen Environment Fatigue Test System and Correlative Fatigue Test of Hydrogen Storage Vessel

Research on Hydrogen Environment Fatigue Test System and Correlative Fatigue Test of Hydrogen Storage Vessel

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	KOU Haixia, AN Zongwen, MA Qiang, GUO Xu. Lifetime Prediction of Wind Turbine Blade Based on Full-Scale Fatigue Testing [J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 755-761.
[2]	YU Zelin, SUN Pengwen, WANG Dong. Fatigue Life Prediction for Flange Connecting Bolts of Wind Turbine Tower[J]. Journal of Shanghai Jiao Tong University(Science), 2020, 25(4): 526-530.
[3]	ZHOU Feng, LIU Haotian, LA Jiankai . Fatigue Analysis of Liquefied Petroleum Gas Cylinders for Safety Risk Assessment[J]. Journal of Shanghai Jiao Tong University (Science), 2020, 25(3): 394-397.
[4]	GUO Wenqiang (郭文强), SUN Pengwen (孙鹏文), NIU Lei (牛磊), WANG Zongtao (王宗涛). Fatigue Life Analysis of Longitudinal Welding Seam for Wind Turbine Tower[J]. Journal of Shanghai Jiao Tong University (Science), 2020, 25(2): 261-265.
[5]	GAO Jianxiong (高建雄), AN Zongwen (安宗文), MA Qiang (马强), ZHAO Shendan (赵申诞). Probability Model of Residual Strength of Materials Under Uncertain Cyclic Load[J]. Journal of Shanghai Jiao Tong University (Science), 2020, 25(2): 266-272.
[6]	ZHENG Yuqiao *(郑玉巧), ZHANG Chengcheng (张铖铖), SU Chun (苏春). Simulation on Remanufacturing Cost by Considering Quality Grade of Returns and Buffer Capacity[J]. Journal of Shanghai Jiao Tong University (Science), 2019, 24(4): 471-476.
[7]	WEI Chengxun *(韦承勋), ZHOU Daocheng (周道成), OU Jinping (欧进萍). Wave Forces and Moments on a Gravity Pier Foundation[J]. Journal of Shanghai Jiao Tong University (Science), 2019, 24(3): 305-312.
[8]	WEI Chengxun* (韦承勋), ZHOU Daocheng (周道成), OU Jinping (欧进萍). Calculation Method of Wave Forces on Large Round-Ended Caisson Foundation[J]. Journal of Shanghai Jiao Tong University (Science), 2019, 24(2): 184-189.
[9]	YU Guibo (于贵波), CAO Lijun (曹立军), WANG Shuhai (王书海), MA Qiao (马乔). Research on Nonlinear Dynamic Simulation and Fatigue Reliability Life Prediction for Synthesis Transmission System of Self-Propelled Gun[J]. Journal of Shanghai Jiao Tong University (Science), 2018, 23(6): 776-783.
[10]	REN Huilong (任慧龙), ZHANG Kaihong (张楷弘), LI Hui (李辉). Research of Springing and Whipping Influence on Ultra-Large Containerships' Fatigue Analysis[J]. sa, 2018, 23(3): 429-.
[11]	WANG Kunpeng1* (王坤鹏), JI Chunyan1 (嵇春艳), XUE Hongxiang2 (薛鸿祥), TANG Wenyong2 (唐文. Fatigue Sensitivity Analysis of Steel Catenary Riser near Touchdown Point[J]. 上海交通大学学报（英文版）, 2017, 22(5): 570-576.
[12]	LI Yonghua* (李永华), QIN Qiang (秦强), WANG Yuedong (王悦东), HU Mingguang (胡明广). Welded Joint Fatigue Reliability Analysis on Bogie Frame of High-Speed Electric Multiple Unit[J]. 上海交通大学学报（英文版）, 2017, 22(3): 365-370.
[13]	GUL Mehr1,2*, TAI Nengling1 (邰能灵), MAHAR Mukhtiar Ahmed3,HUANG Wentao1 (黄文焘), LA. Performance Evaluation of Energy Meters Under Nonlinear Loads[J]. 上海交通大学学报（英文版）, 2017, 22(2): 133-138.
[14]	宋金龙，赵亦希，于忠奇，孔庆帅. 铝合金封头旋压成形变厚度毛坯设计方法[J]. 上海交通大学学报（自然版）, 2017, 51(11): 1304-1311.
[15]	YANG Hui (杨辉), LI Weiying (李伟迎), WANG Jinye* (王瑾晔). A Simple Screening Method for Analysis of Cell Adhesive Strength Cultured on Zein Microspheres[J]. 上海交通大学学报（英文版）, 2017, 22(1): 10-014.