Topology Optimization Method for Calcaneal Prosthesis

doi:10.1007/s12204-021-2324-2

摘要/Abstract

Abstract: With the development of economy and the progress of medical science and technology, artificial prosthesis replacement has become an important means to improve the dysfunction caused by human bone diseases.However, there are still some loose phenomena caused by stress shielding. To solve the complications of aseptic loosening after calcaneal prosthesis replacement, an optimal design method for the prosthesis was proposed. The prosthesis was designed and optimized according to the real bone shape and the replacement requirements by the combination of computed tomography (CT) technology, computer-aided design, finite element analysis, and power flow theory. CT data were imported into MIMICS and Geomagic Studios. UG was used to obtain the geometric model of the human skeleton. Then, the 3D finite element model of the prosthesis was established by combining the finite element software Abaqus, and a series of finite element analysis was carried out. The prosthesis was topologically optimized and filled with a porous structure. The prosthesis was implanted by computer simulation.Finally, the power flow method was used to compare the dynamic performance and energy transfer before and after the prosthesis replacement to verify the rationality of the prosthesis design. In this paper, this method was used to optimize the design of the calcaneal prosthesis, and the research shows that this method can reduce the stress shielding effect of the calcaneal prosthesis. From the case of calcaneal prosthesis optimization, this method is not only a supplement to the contemporary biomechanical theory but also can guide the design of bone prosthesis in bone prosthesis replacement surgery.

Key words: calcaneal prosthesis, finite element, optimization design, replacement

中图分类号:

TP 391
R 319

. [J]. J Shanghai Jiaotong Univ Sci, 2022, 27(2): 240-249.

LIU Xiaoying* (刘晓颖), YUE Yong(岳勇), WANG Chongning (王宠宁), HUANG Jiazan (黄家赞),HUANG Xianwei(黄贤伟), HAO Yanhua(郝艳华). Topology Optimization Method for Calcaneal Prosthesis[J]. J Shanghai Jiaotong Univ Sci, 2022, 27(2): 240-249.

参考文献 23

[1]	BREKELMANS W A M, POORT H W, SLOOFF T J J H. A new method to analyse the mechanical behaviour of skeletal parts [J]. Acta Orthopaedica Scandinavica,1972, 43(5): 301-317.
[2]	PATIL K M, BRAAK L H, HUSON A. Analysis of stresses in two-dimensional models of normal and neuropathic feet [J]. Medical and Biological Engineering and Computing, 1996, 34(4): 280-284.
[3]	JACOB S, PATIL K M, BRAAK L H, et al. Stresses in a 3D two arch model of a normal human foot [J]. Mechanics Research Communications, 1996, 23(4): 387-393.
[4]	JACOB S, PATIL M K. Three-dimensional foot modeling and analysis of stresses in normal and early stage Hansen’s disease with muscle paralysis [J]. Journal of Rehabilitation Research and Development, 1999, 36(3):252-263.
[5]	CHU T M, REDDY N P, PADOVAN J. Threedimensional finite element stress analysis of the polypropylene, ankle-foot orthosis: Static analysis [J].Medical Engineering & Physics, 1995, 17(5): 372-379.
[6]	HU Y C, ZHAO S T, HOU J Y, et al. Sensitivity analysis about influence factors on stability of hip prosthesis[J]. Journal of Mechanical Engineering, 2015, 51(9):45-50 (in Chinese).
[7]	RUATTI S, CORBET C, BOUDISSA M, et al. Total talar prosthesis replacement after talar extrusion [J].The Journal of Foot and Ankle Surgery, 2017, 56(4):905-909.
[8]	TRACEY J, ARORA D, GROSS C E, et al. Custom 3D-printed total talar prostheses restore normal joint anatomy throughout the hindfoot [J]. Foot & Ankle Specialist, 2019, 12(1): 39-48.
[9]	IMANISHI J, CHOONG P F M. Three-dimensional printed calcaneal prosthesis following total calcanectomy[J]. International Journal of Surgery Case Reports,2015, 10: 83-87.
[10]	REN X, YANG L, DUAN X J. Three-dimensional printing in the surgical treatment of osteoid osteoma of the calcaneus: A case report [J]. Journal of International Medical Research, 2017, 45(1): 372-380.
[11]	HARRISW H. Will stress shielding limit the longevity of cemented femoral components of total hip replacement?[J]. Clinical Orthopaedics and Related Research,1992(274): 120-123.
[12]	LEWIS J L, ASKEW M J, WIXSON R L, et al. The influence of prosthetic stem stiffness and of a calcar collar on stresses in the proximal end of the femur with a cemented femoral component [J]. Journal of Bone and Joint Surgery, 1984, 66(2): 280-286.
[13]	SUN M. Discussion on functional adaptability and stress shielding effect of bone [J]. Beijing Biomedical Engineering, 1995, 14(3): 178-179 (in Chinese).
[14]	WANG X, XU S, ZHOU S, et al. Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review [J]. Biomaterials,2016, 83: 127-141.
[15]	GOGARTY E, PASINI D. Hierarchical topology optimization for bone tissue scaffold: preliminary results on the design of a fracture fixation plate [M]//Engineering and applied sciences optimization.Cham: Springer, 2015: 311-340
[16]	AL-TAMIMI A A, PEACH C, FERNANDES P R, et al. Topology optimization to reduce the stress shielding effect for orthopedic applications [J]. Procedia CIRP,2017, 65: 202-206.
[17]	RAHIMIZADEH A, NOURMOHAMMADI Z, ARABNEJAD S, et al. Porous architected biomaterial for a tibial-knee implant with minimum bone resorption and bone-implant interface micromotion [J]. Journal of the Mechanical Behavior of Biomedical Materials,2018, 78: 465-479.
[18]	TAO K, WANG D M, WANG C T, et al. Effects of ligaments and plantar fascia on the foot finite element analysis [J]. Journal of Biomedical Engineering, 2008,25(2): 336-340.
[19]	QIAN Z H. Dynamic finite element modeling and biomechanical function coupling analysis of the human foot complex during locomotion [D]. Jilin, China: Jilin University, 2010.
[20]	ZHANG M, CHEUNG JASON T M, YU J, et al. Human foot three-dimensional finite element of modeling and its biomechanical applications [J]. Journal of Medical Biomechanics, 2007, 22(4): 339-344 (in Chinese).
[21]	FROST H M. A 2003 update of bone physiology and Wolff’s Law for clinicians [J]. The Angle Orthodontist,2004, 74(1): 3-15.
[22]	WOLFF J. The law of bone remodeling [M]. New York:Springer, 1986.
[23]	LIU L L. Convergence criteria for topology optimization of titanium alloy prosthesis and its application [D].Changchun, China: Changchun University of Science and Technology, 2018 (in Chinese).