Journal of Shanghai Jiao Tong University (Science) ›› 2020, Vol. 25 ›› Issue (2): 214-222.doi: 10.1007/s12204-019-2107-1
WANG Ning (王宁), ZHANG Zhuo (张卓)
出版日期:
2020-04-01
发布日期:
2020-04-01
通讯作者:
WANG Ning (王宁)
E-mail:ningwang@chd.edu.cn
WANG Ning (王宁), ZHANG Zhuo (张卓)
Online:
2020-04-01
Published:
2020-04-01
Contact:
WANG Ning (王宁)
E-mail:ningwang@chd.edu.cn
摘要: Mahalanobis-Taguchi system (MTS) is a kind of data mining and pattern recognition method which can identify the attribute characteristics of multidimensional data by constructing Mahalanobis distance (MD) measurement scale. In this paper, considering the influence of irregular distribution of the sample data and abnormal variation of the normal data on accuracy of MTS, a feature recognition and selection model of the equipment state based on the improved MTS is proposed, and two aspects of the model namely construction of the original Mahalanobis space (MS) and determination of the threshold are studied. Firstly, the original training sample space is statistically controlled by the X-bar-S control chart, and extreme data of the single characteristic attribute is filtered to reduce the impact of extreme condition on the accuracy of the model, so as to construct a more robust MS. Furthermore, the box plot method is used to determine the threshold of the model. And the stability of the model and the tolerance to the extreme condition are improved by leaving sufficient range of the variation for the extreme condition which is identified as in the normal range. Finally, the improved model is compared with the traditional one based on the unimproved MTS by using the data from the literature. The result shows that compared with the traditional model, the accuracy and sensitivity of the improved model for state identification can be greatly enhanced.
中图分类号:
WANG Ning (王宁), ZHANG Zhuo (张卓). Feature Recognition and Selection Method of the Equipment State Based on Improved Mahalanobis-Taguchi System[J]. Journal of Shanghai Jiao Tong University (Science), 2020, 25(2): 214-222.
WANG Ning (王宁), ZHANG Zhuo (张卓). Feature Recognition and Selection Method of the Equipment State Based on Improved Mahalanobis-Taguchi System[J]. Journal of Shanghai Jiao Tong University (Science), 2020, 25(2): 214-222.
[1] | TAGUCHI G, JUGULUM R. The Mahalanobis-Taguchi strategy: A pattern technology system [M].Hoboken, NJ, USA: John Wiley & Sons, 2002. |
[2] | WOODALL W H, KOUDELIK R, TSUI K L, et al. A review and analysis of the Mahalanobis-Taguchi system[J]. Technometrics, 2003, 45(1): 1-15. |
[3] | YAZID A M, RIJAL J K, AWALUDDIN M S, et al. Pattern recognition on remanufacturing automotive component as support decision making using Mahalanobis-Taguchi system [J]. Procedia CIRP, 2015,26: 258-263. |
[4] | ABU M Y, JAMALUDIN K R, RAMLIE F. Pattern recognition using Mahalanobis-Taguchi system on connecting rod through remanufacturing process: A case study [J]. Advanced Materials Research, 2013, 845:584-589. |
[5] | MOHAN D, SAYGIN C, SARANGAPANI J. Realtime detection of grip length deviation during pull-type fastening: a Mahalanobis-Taguchi System (MTS)-based approach [J]. International Journal of Advanced Manufacturing Technology, 2008, 39(9/10): 995-1008. |
[6] | MAKAJIMA H, TAKADA K, YANO H, et al.Predictive evaluation and efficient management of medical examinations using Mahalanobis Taguchi system method [J]. Japanese Journal of Public Health,1999, 46(5): 351-363(in Japanese). |
[7] | DAS P, DATTA S. Exploring the effects of chemical composition in hot rolled steel product using Mahalanobis distance scale under Mahalanobis-Taguchi system[J]. Computational Materials Science, 2007, 38(4):671-677. |
[8] | CUDNEY E A, PARYANI K, RAGSDELL K M.Applying the Mahalanobis-Taguchi system to vehicle handling [J]. Concurrent Engineering, 2006, 14(4):343-354. |
[9] | ZENG J H, ZENG F Z. The measurement scale of Mahalanobis-Taguchi system optimization based on fuzzy robustness discriminant criterion [J]. Industrial Engineering and Management, 2008, 13(3): 52-55(in Chinese). |
[10] | NAKATSUGAWA M, OHUCHI A. A study on determination of the threshold in MTS algorithm [J]. Transactions of the Institute of Electronics Information and Communication Engineers A, 2001, 84(4): 519-527. |
[11] | SU C T, HSIAO Y H. An evaluation of the robustness of MTS for imbalanced data [J]. IEEE Transactions on Knowledge and Data Engineering, 2007, 19(10): 1321-1332. |
[12] | XU Q, ZHENG C D, HAN Z J. Study of Mahalanobis-Taguchi system in multiple recognition [J]. Journal of Nanjing University of Science and Technology, 2002,26(1): 92-95 (in Chinese). |
[13] | IQUEBAL A S, PAL A, CEGLAREK D, et al. Enhancement of Mahalanobis-Taguchi system via rough sets based feature selection [J]. Expert Systems with Applications, 2014, 41(17): 8003-8015. |
[14] | FOSTER C R, JUGULUM R, FREY D D. Evaluating an adaptive one-factor-at-a-time search procedure within the Mahalanobis-Taguchi system [J]. International Journal of Industrial and Systems Engineering,2009, 4(6): 600-614. |
[15] | RAI B K, CHINNAM R B, SINGH N. Prediction of drill-bit breakage from degradation signals using Mahalanobis-Taguchi system analysis [J]. International Journal of Industrial and Systems Engineering,2008, 3(2): 134-148. |
[16] | WANG N, SAYGIN C, SUN S D. Impact of Mahalanobis space construction on effectiveness of Mahalanobis-Taguchi system [J]. International Journal of Industrial and Systems Engineering, 2013,13(2): 233-249. |
[17] | LIPARAS D, ANGELIS L, FELDT R. Applying the Mahalanobis-Taguchi strategy for software defect diagnosis[J]. Automated Software Engineering, 2012,19(2): 141-165. |
[18] | LIPARAS D, LASKARIS N, ANGELIS L. Incorporating resting state dynamics in the analysis of encephalographic responses by means of the Mahalanobis-Taguchi strategy [J]. Expert Systems with Applications,2013, 40(7): 2621-2630. |
[19] | YANG T, CHENG Y T. The use of Mahalanobis-Taguchi System to improve flip-chip bumping height inspection efficiency [J]. Microelectronics Reliability,2010, 50(3): 407-414. |
[20] | GHASEMI E, AAGHAIE A, CUDNEY E A. Mahalanobis Taguchi system: A review [J]. International Journal of Quality & Reliability Management, 2015,32(3): 291-307. |
[21] | SOYLEMEZOGLU A, JAGANNATHAN S, SAYGIN C. Mahalanobis Taguchi system (MTS) as a prognostics tool for rolling element bearing failures [J]. Journal of Manufacturing Science and Engineering, 2010,132(5): 051014. |
[22] | JUGULUM R, TAGUCHI G, TAGUCHI S, et al. A review and analysis of the Mahalanobis-Taguchi system:Discussion [J]. Technometrics, 2003, 45(1): 16-21. |
[23] | GAUDARD M, RAMSEY P J. Introduction to statistical quality control [J]. Technometrics, 1997, 39(3):331-332. |
[24] | BENJAMINI Y. Opening the box of a boxplot [J]. The American Statistician, 1988, 42(4): 257-262. |
[25] | SU C T, HSIAO Y H. An evaluation of the robustness of MTS for imbalanced data [J]. IEEE Transactions on Knowledge and Data Engineering, 2007, 19(10): 1321-1332. |
[1] | LIU Mingguang, LIAO Yaxuan, LI Xiangshun . Data-Driven Fault Detection of Three-Tank System Applying MWAT-ICA[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(5): 659-664. |
[2] | BESSAAD Nassim, BAO Qilian, SUN Shuodong, DU Yuding, LIU Lin, HASSAN Mahmood Ul . Adaptive Dual Wavelet Threshold Denoising Function Combined with Allan Variance for Tuning FOG-SINS Filter[J]. Journal of Shanghai Jiao Tong University(Science), 2020, 25(4): 434-440. |
[3] | ZHANG Ke (张珂), LIN Tianran (林天然), JIN Xia (金霞) . Low Speed Bearing Fault Diagnosis Based on EMD-CIIT Histogram Entropy and KFCM Clustering[J]. Journal of Shanghai Jiao Tong University (Science), 2019, 24(5): 616-621. |
[4] | YU Kun (俞昆), TAN Jiwen (谭继文), LIN Tianran (林天然). Fault Diagnosis of Rolling Element Bearing Using Multi-Scale Lempel-Ziv Complexity and Mahalanobis Distance Criterion[J]. Journal of Shanghai Jiao Tong University (Science), 2018, 23(5): 696-701. |
[5] | WENG Paul1,2*, QIU Zeqi3 (邱泽麒), COSTANZO John3, YIN Xiaoqi3 (阴小骐), SINOPOLI Brun. Optimal Threshold Policies for Robust Data Center Control[J]. sa, 2018, 23(1): 52-60. |
[6] | CUI Yan* (崔妍), CHEN Shijun (陈世均), QU Meng (瞿勐), HE Shanhong (何善红). Research and Application of New Threshold De-noising Algorithm for Monitoring Data Analysis in Nuclear Power Plant[J]. 上海交通大学学报(英文版), 2017, 22(3): 355-360. |
[7] | LIU Jinhai* (刘金海), MA Yanjuan (马艳娟), WU Zhenning (吴振宁), WANG Gang (汪刚). Real-Time Pressure Based Diagnosis Method for Oil Pipeline Leakage[J]. 上海交通大学学报(英文版), 2017, 22(2): 233-239. |
[8] | LIAN Zhichaoa,b* (练智超), SONG Jiea (宋 杰), LI Yanga (李 杨). Adaptive Illumination Normalization Approach Based on Denoising Technique for Face Recognition[J]. 上海交通大学学报(英文版), 2017, 22(1): 45-049. |
[9] | ZHENG Xiaoya1*(郑晓亚), YOU Haibo2 (尤海波). Do China Mainland and SARs Constitute an Optimal Currency Area? Evidence from Nonlinearity and Stationarity Behavior Testing on Real Exchange Rates[J]. 上海交通大学学报(英文版), 2016, 21(3): 328-334. |
[10] | YUAN Rong1,2 (袁 容), LI Hai-qing2* (李海庆), HE Li-ping2 (何俐萍), GAO Hui-ying2 (高会英). Reliability Analysis for the Competing Failure with Probabilistic Failure Threshold Value and Its Application to the k-out-of-n Systems[J]. 上海交通大学学报(英文版), 2015, 20(4): 500-507. |
[11] | WANG Wen-bin (王文彬), LI Ping* (李娉), PENG Rui (彭锐). Optimal Preventive Maintenance Policy with Consideration of Production Wait[J]. 上海交通大学学报(英文版), 2015, 20(3): 322-325. |
[12] | ZHU Hai-jiang (祝海江). Wavelet-Based Hybrid Thresholding Method for Ultrasonic Liver Image Denoising[J]. 上海交通大学学报(英文版), 2015, 20(2): 135-142. |
[13] | LONG Yu1* (龙宇), CHEN Ke-fei2 (陈克非), MAO Xian-ping1 (毛贤平). New Constructions of Dynamic Threshold Cryptosystem[J]. 上海交通大学学报(英文版), 2014, 19(4): 431-435. |
[14] | KAN Hong-xing1 (阚红星), WANG Guo-qiang1* (王国强),WANG Zong-dian1 (王宗殿), DING Shuai2 . A Method of Minimum Reusability Estimation for Automated Software Testing[J]. 上海交通大学学报(英文版), 2013, 18(3): 360-365. |
[15] | CHEN Jian-hong (陈剑洪), LONG Yu (龙 宇), CHEN Ke-fei (陈克非) WANG Yong-tao. An Efficient Threshold Key-Insulated Signature Scheme[J]. 上海交通大学学报(英文版), 2011, 16(6): 658-662. |
阅读次数 | ||||||
全文 |
|
|||||
摘要 |
|
|||||