上海交通大学学报(英文版) ›› 2015, Vol. 20 ›› Issue (4): 500-507.doi: 10.1007/s12204-015-1657-0
YUAN Rong1,2 (袁 容), LI Hai-qing2* (李海庆), HE Li-ping2 (何俐萍), GAO Hui-ying2 (高会英)
出版日期:
2015-08-29
发布日期:
2015-08-05
通讯作者:
LI Hai-qing (李海庆)
E-mail:lihaiqing27@163.com
YUAN Rong1,2 (袁 容), LI Hai-qing2* (李海庆), HE Li-ping2 (何俐萍), GAO Hui-ying2 (高会英)
Online:
2015-08-29
Published:
2015-08-05
Contact:
LI Hai-qing (李海庆)
E-mail:lihaiqing27@163.com
摘要: A method for reliability analysis of the competing failure with the probabilistic failure threshold value not the fixed threshold value is presented, which involves the random shocks and the degradation is independent and dependent respectively. Specifically, for the dependent condition, the effect due to the random shocks on the degradation is considered with a damage factor. In addition, the dependent competing failure model is applied to the reliability analysis of the k-out-of-n systems. Finally, two studied cases are presented to illustrate the proposed method, and the results show the proposed method is reasonable.
中图分类号:
YUAN Rong1,2 (袁 容), LI Hai-qing2* (李海庆), HE Li-ping2 (何俐萍), GAO Hui-ying2 (高会英). Reliability Analysis for the Competing Failure with Probabilistic Failure Threshold Value and Its Application to the k-out-of-n Systems[J]. 上海交通大学学报(英文版), 2015, 20(4): 500-507.
YUAN Rong1,2 (袁 容), LI Hai-qing2* (李海庆), HE Li-ping2 (何俐萍), GAO Hui-ying2 (高会英). Reliability Analysis for the Competing Failure with Probabilistic Failure Threshold Value and Its Application to the k-out-of-n Systems[J]. Journal of shanghai Jiaotong University (Science), 2015, 20(4): 500-507.
[1] Alessandro B. Reliability engineering: Theory and practice [M]. New York, USA: Springer, 2010. [2] Jiang L, Feng Q M, Coit D W. Reliability and maintenance modeling for dependent competing failure processes with shifting failure thresholds [J]. IEEE Transactions on Reliability, 2012, 61(4): 932-948. [3] Klutke G A, Yang Y J. The availability of inspected systems subject to shocks and graceful degradation [J].IEEE Transactions on Reliability, 2002, 51(3): 371-374. [4] Wang Y P, Pham H. Modeling the dependent competing risks with multiple degradation processes and random shock using time-varying copulas [J]. IEEE Transactions on Reliability, 2012, 61(1): 13-22. [5] Li W J, Pham H. Reliability modeling of multi-state degraded systems with multi-competing failures and random shocks [J]. IEEE Transactions on Reliability,2005, 54 (2): 297-303. [6] Huang W, Askin R G. Reliability analysis of electronic devices with multiple competing failure modes involving performance aging degradation [J]. Quality and Reliability Engineering International, 2003, 19:241-254. [7] Peng H, Feng Q, Coit D W. Reliability and maintenance modeling for systems subject to multiple dependent competing failure processes [J]. IIE Transactions,2011, 43: 12-22. [8] Chen J Y, Li Z H. An extended extreme shock maintenance model for a deteriorating system [J]. Reliability Engineering and System Safety, 2008, 93: 1123-1129. [9] Mallor F, Santos J. Reliability of systems subject to shocks with a stochastic dependence for the damages[J]. Test, 2003, 12(2): 427-444. [10] Li Z H, Zhao P. Reliability analysis on the δ-shock model of complex systems [J]. IEEE Transactions on Reliability, 2007, 56(2): 340-348. [11] Sgarbossa F, Pham H. A cost analysis of systems subject to random field environments and reliability[J]. IEEE Transactions on Systems, Man, and Cybernetics.Part C. Application and Reviews, 2010, 40(4):429-437. [12] Nakagawa T. Shock and damage models in reliability theory [M]. London, UK: Springer, 2007. [13] Robinson M E, Crowder M J. Bayesian methods for a growth-curve degradation model with repeated measures [J]. Lifetime Data Analysis, 2000, 6: 357-374. [14] Yuan X X, Pandey M D. A nonlinear mixed-effects model for degradation data obtained from in-service inspections [J]. Reliability Engineering and System Safety, 2009, 94: 509-519. [15] Nicolai R P, Dekker R, van Noortwijk J M.A comparison of models for measurable deterioration:An application to coatings on steel structures [J]. Reliability Engineering and System Safety, 2007, 92: 1635-1650. [16] Xue J, Yang K. Dynamic reliability analysis of coherent multistate systems [J]. IEEE Transactions on Reliability, 1995, 44(4): 683-688. [17] Huang W, Dietrich D L. An alternative degradation reliability modeling approach using maximum likelihood estimation [J]. IEEE Transactions on Reliability,2005, 54(2): 310-317. [18] Lu C J, Meeker W Q. Using degradation measures to estimate a time-to-failure distribution [J]. Technometrics,1993, 35(2): 161-174. [19] Pham H. On the optimal design of k-out-of-n subsystems [J]. IEEE Transactions on Reliability, 1992,41(4): 572-574. [20] Pham H, Wang H. Optimal (τ, T) opportunistic maintenance of a k-out-of-n: G system with imperfect PM and partial failure [J]. Naval Research Logistics,2000, 47: 223-239. [21] Liu Y, Huang H Z, Pham H. Reliability evaluation of systems with degradation and random shocks [C]//Proceedings of the Reliability and Maintainability Symposium.Las Vegas, USA: IEEE, 2008: 328-333. |
[1] | KOU Haixia, AN Zongwen, MA Qiang, GUO Xu. Lifetime Prediction of Wind Turbine Blade Based on Full-Scale Fatigue Testing [J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 755-761. |
[2] | ZHOU Yuan (周源), WANG Haowei (王浩伟), Lü Weimin (吕卫民). Statistical Inference of Reliability with Multivariate Accelerated Degradation Data[J]. Journal of Shanghai Jiao Tong University (Science), 2020, 25(2): 237-245. |
[3] | GU Yingkui *(古莹奎), SHEN Yanjun (沈延军), YU Dongping (余东平). Degradation Reliability Analysis Based on TOPSIS Model Selection Method[J]. Journal of Shanghai Jiao Tong University (Science), 2019, 24(3): 351-356. |
[4] | Lü Yi (吕燚), ZHANG Yun (章云). Reliability Modeling and Maintenance Policy Optimization for Deteriorating System Under Random Shock[J]. Journal of Shanghai Jiao Tong University (Science), 2018, 23(6): 791-797. |
[5] | DUAN Fengjun (段凤君), WANG Guanjun (王冠军). Bivariate Constant-Stress Accelerated Degradation Model and Inference Based on the Inverse Gaussian Process[J]. Journal of Shanghai Jiao Tong University (Science), 2018, 23(6): 784-790. |
[6] | LIU Ji (刘骥), ZHANG Mingze (张明泽), CHEN Xin (陈昕), QI Pengshuai (齐朋帅). Approach for Reliability Evaluation of Cross-Linked Polyethylene Under Combined Thermal and Vibration Stresses[J]. Journal of Shanghai Jiao Tong University (Science), 2018, 23(6): 758-763. |
[7] | SUN Bo1* (孙 博), YE Tian-yuan1 (叶田园), FANG Yuan2 (方 园). A Novel Model of Failure Rate Prediction for Circular Electrical Connectors[J]. 上海交通大学学报(英文版), 2015, 20(4): 472-476. |
[8] | YANG Chun-boa (阳纯波), ZENG Sheng-kuia,b (曾声奎), GUO Jian-bina,b* (郭健彬). Validation Metric of Degradation Model with Dynamic Performance[J]. 上海交通大学学报(英文版), 2015, 20(3): 302-306. |
[9] | HUANG Wen-ping1 (黄文平), ZHOU Jing-lun1 (周经伦),NING Ju-hong2* (宁菊红), LIU Tian-yu1 (. Optimal Burn-in and Preventive Maintenance Modeling with Competing Failure Processes[J]. 上海交通大学学报(英文版), 2015, 20(3): 293-297. |
[10] | ZUO Fang-jun (左芳君), ZHU Shun-peng (朱顺鹏), GAO Hui-ying (高会英),L¨U Zhi-qiang (吕志强),. Stochastic Fatigue Life and Reliability Prediction Based on Residual Strength[J]. 上海交通大学学报(英文版), 2015, 20(3): 331-337. |
[11] | ZHU Guo-liang1,2 (祝国梁), XIAO Yan-ping1,3 (肖艳萍), YANG Yong-xiang1,3,4 (杨永祥). Degradation Behavior of Epoxy Resins in Fibre Metal Laminates Under Thermal Conditions[J]. 上海交通大学学报(英文版), 2012, 17(3): 257-262. |
阅读次数 | ||||||||||||||||||||||||||||||||||||||||||||||||||
全文 200
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||
摘要 762
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||