Journal of Shanghai Jiao Tong University (Science) ›› 2019, Vol. 24 ›› Issue (3): 395-401.doi: 10.1007/s12204-019-2075-5

• • 上一篇    下一篇

Effect of Deposition Time on Thickness and Corrosion Behavior of Zn-Fe Coating

LIU Li (刘丽), YU Sirong* (于思荣)   

  1. (School of Materials Science and Engineering, China University of Petroleum (East China), Qingdao 266580, Shandong, China)
  • 出版日期:2019-06-01 发布日期:2019-05-29
  • 通讯作者: YU Sirong* (于思荣) E-mail:SirongYu2014@126.com

Effect of Deposition Time on Thickness and Corrosion Behavior of Zn-Fe Coating

LIU Li (刘丽), YU Sirong* (于思荣)   

  1. (School of Materials Science and Engineering, China University of Petroleum (East China), Qingdao 266580, Shandong, China)
  • Online:2019-06-01 Published:2019-05-29
  • Contact: YU Sirong* (于思荣) E-mail:SirongYu2014@126.com

摘要: Zn-Fe coatings on Q235 steel are prepared by pack cementation process at 390 ?C for 2, 4, 6, 8 and 10 h to investigate the effects of the deposition time on the thickness and corrosion behavior of the Zn-Fe coatings. The thickness of the coating increases with the increase of the deposition time. The coating is composed of a thick outer layer and a thin inner layer. The formation of the coating depends on the inward diffusion of Zn atoms and the outward diffusion of Fe atoms. The outer layer is composed of Fe11Zn40 and FeZn10 phases. The corrosion behavior of the Zn-Fe coatings is evaluated by immersion test and polarization test. The results show that the Zn-Fe coatings can effectively prevent the Q235 steel from corrosion. The corrosion resistance of the coating is proportional to the deposition time.

关键词: Zn, pack cementation, thickness, diffusion, corrosion resistance

Abstract: Zn-Fe coatings on Q235 steel are prepared by pack cementation process at 390 ?C for 2, 4, 6, 8 and 10 h to investigate the effects of the deposition time on the thickness and corrosion behavior of the Zn-Fe coatings. The thickness of the coating increases with the increase of the deposition time. The coating is composed of a thick outer layer and a thin inner layer. The formation of the coating depends on the inward diffusion of Zn atoms and the outward diffusion of Fe atoms. The outer layer is composed of Fe11Zn40 and FeZn10 phases. The corrosion behavior of the Zn-Fe coatings is evaluated by immersion test and polarization test. The results show that the Zn-Fe coatings can effectively prevent the Q235 steel from corrosion. The corrosion resistance of the coating is proportional to the deposition time.

Key words: Zn, pack cementation, thickness, diffusion, corrosion resistance

中图分类号: