Numerical Wave Simulation Using Geometrical VOF Method Based on OpenFOAM

doi:10.16183/j.cnki.jsjtu.2020.99.015

Abstract

Abstract:

Numerical wave simulation is a significant research topic. In this paper, the open source computational fluid dynamics (CFD) platform, OpenFOAM, is utilized to simulate Stokes fifth-order waves. Since geometrical volume-of-fluid (VOF) could better capture free surface due to its geometrical reconstruction step, the free surface simulations are accomplished by applying OpenFOAM built-in geometrical VOF method-isoAdvector, and the relaxation zone scheme is introduced through secondary development for wave absorption. The mesh density and Courant number convergence analyses with geometrical VOF are conducted. The simulation shows that satisfactory results could be obtained with a large Courant number. The algebraic and geometrical VOF simulated data with respect to wave elevation and phase at varied wave steepnesses and frequencies are recorded and compared with the theoretical value of Stokes fifth-order waves, which demonstrates that geometrical VOF is better than algebraic VOF in the prediction of wave elevation. Finally, the lengths and weights of the wave absorption zone are discussed, and the results imply that the best practice for the wave absorption is assigning the wave absorption zone length at least two times of the wave length along with applying exponential weight distribution.

Key words: OpenFOAM, geometrical volume-of-fluid (VOF), Stokes fifth-order waves, relaxation zone scheme

CLC Number:

P751

TIAN Kang, ZHANG Yao, LI Jinlong, ZHANG Xinshu, YOU Yunxiang. Numerical Wave Simulation Using Geometrical VOF Method Based on OpenFOAM[J]. Journal of Shanghai Jiao Tong University, 2021, 55(1): 1-10.

Figures/Tables 12

Fig.1

Fig.2

Fig.3

Tab.1

Fig.4

Fig.5

Fig.6

Fig.7

Fig.8

Fig.9

Fig.10

Fig.11

References 17

[1]	刘霞，谭国焕，王大国. 基于边界造波法的二阶Stokes波的数值生成[J]. 辽宁工程技术大学学报(自然科学), 2010, 29(1): 107-111.
	LIU Xia, TAN Guohuan, WANG Daguo. Numerical simulation of second-order stokes based on wave-generation method of defining inlet boundary conditions[J]. Journal of Liaoning Technical University (Natural Science), 2010, 29(1): 107-111.
[2]	王永学. 无反射造波数值波浪水槽[J]. 水动力学研究与进展，1994, 9(2): 205-213.
	WANG Yongxue. Numerical wave making tank without wave reflection[J]. Journal of Hydrodynamics, 1994, 9(2): 205-213.
[3]	WEI G, KIRBY J T, SINHA A. Generation of waves in Boussinesq models using a source function method[J]. Coastal Engineering, 1998, 36(4): 271-299.
[4]	HARLOW F H, WELCH J E. Numerical calculation of time-dependent viscous incompressible flow of fluid with free surface[J]. Physics of Fluids, 1965, 8(12): 2182-2189.
[5]	HIRT C W, NICHOLS B D. Volume of fluid method for the dynamics of free boundaries[J]. Journal of Computational Physics, 1981, 39(1): 201-225.
[6]	ROENBY J, BREDMOSE H, JASAK H. A computational method for sharp interface advection[J]. Royal Society Open Science, 2016, 3(11): 160405.
[7]	HATAYAMA S. Comparison of effectiveness of four open boundary conditions for incompressible unbounded flows[J]. Technical Report of National Aerospace Laboratory, 1998: 1-28.
[8]	CLEMENT A. Coupling of two absorbing boundary conditions for 2D time-domain simulations of free surface gravity waves[J]. Journal of Computational Physics, 1996, 126(1): 139-151.
[9]	JACOBSEN N G, FUHRMAN D R, FREDSOE J. A wave generation toolbox for the open-source CFD library: OpenFoam[J]. International Journal for Numerical Methods in Fluids, 2012, 70(9): 1073-1088.
[10]	CHEN L F, ZANG J, HILLIS A J, et al. Numerical investigation of wave-structure interaction using OpenFOAM[J]. Ocean Engineering, 2014, 88: 91-109.
[11]	JENSEN B, JACOBSEN N G, CHRISTENSEN E D. Investigations on the porous media equations and resistance coefficients for coastal structures[J]. Coastal Engineering, 2014, 84: 56-72.
[12]	王东旭. 基于OpenFOAM的数值波浪水槽的开发与应用[D]. 大连：大连海洋大学，2018.
	WANG Dongxu. Research and development of numerical wave tank based on OpenFOAM[D]. Dalian: Dalian Maritime University, 2018.
[13]	ALBADAWI A, DONOGHUE D, ROBINSON A J, et al. Influence of surface tension implementation in volume of fluid and coupled volume of fluid with level set methods for bubble growth and detachment[J]. International Journal of Multiphase Flow, 2013, 53: 11-28.
[14]	SOUTO-IGLESIAS A, BULIAN G, BITA-VERA E. A set of canonical problems in sloshing. Part 2: Influence of tank width on impact pressure statistics in regular forced angular motion[J]. Ocean Engineering, 2015, 105: 136-159.
[15]	BERBEROVIC E, VAN HINSBERG N, JAKIRLIC S, et al. Drop impact onto a liquid layer of finite thickness: Dynamics of the cavity evolution[J]. Physical Review E, 2009, 79 (3): 036306.
[16]	BRECHT D, PIETER R, PETER T. Application of a buoyancy-modified k-ω SST turbulence model to simulate wave run-up around a monopole subjected to regular waves using OpenFOAM[J]. Coastal Engineering, 2017, 125: 81-94.
[17]	BRECHT D, PETER T, PIETER R. Performance of a buoyancy-modified k-ω and k-ω SST turbulence model for simulating wave breaking under regular waves using OpenFOAM[J]. Coastal Engineering, 2018, 138: 49-65.

算例编号	波频/s^－1	波长/m	波幅/m
1	5.55	2	0.04
2	4.53	3	0.04
3	3.92	4	0.04
4	5.55	2	0.02
5	5.55	2	0.08