Design and Optimization of Three-Dimensional Receiving
 Coils for Intestinal Robots

doi:10.16183/j.cnki.jsjtu.2019.179

Abstract

Abstract: A novel three-dimensional receiving coil structure is designed to meet the power requirements of intestinal robot and to solve the detuning problem caused by random changes of robot posture in human body. Each dimension of the three-dimensional receiving coil is wound in the same way, and the receiving power of each dimension is relatively stable. The influence of the structural parameters on transmission efficiency and power is analyzed through a series of comparative experiments from core diameter, coil turns, and wire diameter. The attitude stability of the optimized receiving coil is analyzed. The results show that the best receiving coil has a magnetic core diameter of 6mm, a number of coil turns of 80, and a coil wire diameter of 0.12mm. When the driving voltage of the transmitting coil is 10V, the maximum transmission power of the optimized receiving coil is 1216mW, and the transmission efficiency of the wireless power supply system is 6.64%. At different attitude angles, the maximum transmitted power generated by the three dimensions of the receiving coil is almost the same. The three-dimensional coil outputs a minimum power of about 527mW when α=45° and β=45°, which allows the robot to basically maintain normal operation.

Key words: intestinal robot, three-dimensional receiving coil, optimal design, attitude stability

CLC Number:

WEN Yani, YAN Guozheng, WANG Zhiwu, JIANG Pingping, XUE Rongrong, WANG Yiyun. Design and Optimization of Three-Dimensional Receiving Coils for Intestinal Robots[J]. Journal of Shanghai Jiaotong University, 2020, 54(11): 1117-1123.

References ［13］

［1］	国家卫生健康委员会. 中国卫生健康统计年鉴［M］. 北京: 中国协和医科大学出版社, 2018.
	National Health Commission of the People’s Republic of China. China’s annual statistical yearbook on health and family planning［M］. Beijing: Peking Union Medical College press, 2016.
［2］	马官营, 颜国正, 王文兴. 微型诊疗系统无线供能技术及其生物电磁效应研究［J］. 北京生物医学工程, 2013, 32(4): 347-352.
	MA Guanying, YAN Guozheng, WANG Wenxing. Wireless power transmission of microsystem and bioelectromagnetic effects［J］. Beijing Biomedical Engineering, 2013, 32(4): 347-352.
［3］	李达伟, 姜萍萍, 柯全, 等. 肠道机器人无线能量发射系统优化设计［J］. 上海交通大学学报, 2018, 50(9): 1031-1037.
	LI Dawei, JIANG Pingping, KE Quan, et al. Optimal design of wireless power transfer system for gastrointestinal robots［J］. Journal of Shanghai Jiao Tong University, 2018, 50(9): 1031-1037.
［4］	CARTA R, SFAKIOTAKIS M, PATEROMICHELAKIS N, et al. A multi-coil inductive powering system for an endoscopic capsule with vibratory actuation［J］. Sensors and Actuators A: Physical, 2011, 172(1): 253-258.
［5］	GAO J Y, YAN G Z, WANG Z W, et al. A capsule robot powered by wireless power transmission: Design of its receiving coil［J］. Sensors and Actuators A: Physical, 2015, 234(1): 133-142.
［6］	MA G, YAN G Z, HE X. Power transmission for gastrointestinal microsystems using inductive coupling［J］. Physiological Measurement, 2007, 28(3): 9-18.
［7］	PUERS R, CARTA R, THONE J. Wireless power and data transmission strategies for next-generation capsule endoscope［J］. Journal of Micromechanics and Microengineering, 2011, 21(5): 2703-2712.
［8］	JIA Z W, YAN G Z, JIANG P P, et al. Efficiency optimization of wireless power transmission systems for active capsule endoscope［J］. Physiological Mea-surement, 2011, 32(10): 1561-1573.
［9］	贾智伟, 颜国正, 石煜, 等. 胶囊内窥镜的无线能量传输系统优化设计［J］. 电子测量与仪器学报, 2011, 25(12): 1060-1065.
	JIA Zhiwei, YAN Guozheng, SHI Yu et al. Optimal design of wireless power transmission system for capsule endoscopes［J］. Journal of Electronic Measurement and Instrument, 2011, 25(12): 1060-1065.
［10］	GAO J Y, YAN G Z, SHI Y B, et al. Analysis of connection way of a three-dimensional receiving coil onboard a capsule robot for wireless power transmission［J］. Progress in Electromagnetics Research M, 2019, 78(10): 39-48.
［11］	GIMM Y M., YOO H S, KIM M J, et al. Receiving coil analysis of wireless power transmission with inductive coupling［J］. Korea-Japan Microwave Conference, 2007, 21(5): 231-248.
［12］	杨凯, 颜国正, 高晋阳. 胶囊机器人无线能量传输系统设计［J］. 北京生物医学工程, 2016, 35(5): 510-515.
	YANG Kai, YAN Guozheng, GAO Jinyang. Design of wireless power supply system for robotic capsule［J］. Beijing Biomedical Engineering, 2016, 35(5): 510-515.
［13］	KE Q, LUO W J, YAN G Z, et al. Analytical model and optimized design of power transmitting coil for inductively coupled endoscope robot［J］. Transactions on Biomedical Engineering, 2016, 63(4): 694-706.

[1]	FU Wenhao, JIANG Pingping, YAN Guozheng, PENG Yuqi, FEI Qian, ZHUANG haoyu. Design and Implementation of a New Type of Gastrointestinal Robot Wireless Power Transmission System [J]. Journal of Shanghai Jiao Tong University, 2022, 56(8): 1057-1066.
[2]	LIU Dasheng∗ (刘大生), YAN Guozheng (颜国正). Biomechanical Analysis of a Radial Expansion Mechanism of Intestinal Robot Coupling with Hyperelastic Intestinal Wall [J]. J Shanghai Jiaotong Univ Sci, 2022, 27(4): 552-560.
[3]	XUE Rongrong, WANG Zhiwu, YAN Guozheng, ZHUANG Haoyu. Noise Reduction Method for Intestinal Image Acquired by Intestinal Robot [J]. Journal of Shanghai Jiao Tong University, 2021, 55(10): 1303-1309.
[4]	WANG Lanzhi, LI Shuxin. A Fast Erecting Method and Optimization Design Based on Sliding Hinge Point [J]. Air & Space Defense, 2020, 3(2): 24-28.
[5]	PU Pengxian,YAN Guozheng,WANG Zhiwu,HAN Ding. Design and Experiment of Expanding Mechanism and Power Receiving Coil for Micro Intestinal Robot [J]. Journal of Shanghai Jiaotong University, 2019, 53(10): 1143-1150.
[6]	LI Dawei,JIANG Pingping,KE Quan,YAN Guozheng. Optimal Design of Wireless Power Transfer System for Gastrointestinal Robots [J]. Journal of Shanghai Jiaotong University, 2018, 52(9): 1031-1037.
[7]	SHEN Yue1,JIANG Zhihua2,YAN Guozheng1,KE Quan1,WANG Yongbing1. Optimization and Realization of Wireless Capsule Robot [J]. Journal of Shanghai Jiaotong University, 2018, 52(1): 39-44.
[8]	HU Sheng-yong* (胡盛勇), LUO Jun (罗军). Uncertainty Quantification for Structural Optimal Design Based on Evidence Theory [J]. Journal of shanghai Jiaotong University (Science), 2015, 20(3): 338-343.
[9]	Hao BAI, Meng-na ZHANG, Xiao-hong SHEN, Hai-yan WANG. Design of Low-Power Platform for Deepwater Riser Underwater Monitoring [J]. Ocean Engineering Equipment and Technology, 2015, 2(2): 133-137.
[10]	Rui QIN, Qing-ping LI, Xiao-lan LUO, Meng-lan DUAN. Optimization Design of Tubing Hanger Outlet Angle of Horizontal Tree [J]. Ocean Engineering Equipment and Technology, 2015, 2(1): 50-54.
[11]	ZHU Rongsheng1,XING Shubing1,LONG Yun2,WANG Xiuli1,HE Bo1,CAO Liang1. Unequal Head Hydraulic Optimal Design and Experiment on a Non-clogging Centrifugal Pump [J]. Journal of Shanghai Jiaotong University, 2015, 49(05): 675-680.
[12]	WANG Cunfu,ZHAO Min,GE Tong. Optimal Design of Ring-Stiffened Cylindrical Shell Considering Instability Mode [J]. Journal of Shanghai Jiaotong University, 2014, 48(1): 56-63.
[13]	LIN Wei, YAN Guo-Zheng. The Critical Stroke Model of Anchoring-Extending Gastrointestinal Micro Robot and Its Experimental Study [J]. Journal of Shanghai Jiaotong University, 2013, 47(04): 656-662.
[14]	TAN Xiao-Bo, ZHANG Wei-Ping, CHI Peng-Cheng, KE Xi-Jun, ZOU Cai-Jun, CHEN Wen-Yuan. Simulation and Optimal Design of a Piezoelectric Bimorph Actuator for FlappingWing Micro Aerial Vehicle [J]. Journal of Shanghai Jiaotong University, 2012, 46(11): 1848-1851.
[15]	CONG Cheng-Hua-a, b , REN Ze-Bin-b, PENG Qiang-a, b . Numerical Investigation about Optimal Design of Open-Jet Rectangular Test Section in Low Speed Wind Tunnel [J]. Journal of Shanghai Jiaotong University, 2012, 46(08): 1320-1327.

Design and Optimization of Three-Dimensional Receiving Coils for Intestinal Robots

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References ［13］

Related Articles 15

Recommended Articles

Metrics

Comments