Design and Verification of Virtualization Transplantation Method
 for Distributed Control System

doi:10.16183/j.cnki.jsjtu.2019.S1.021

Abstract

Abstract: Virtualization transplantation technologies of distributed control system (DCS) include simulation, emulation and stimulation. Based on emulation, a set of technology solution for virtualization transplantation of DCS architecture and field control station was proposed. Similarities and differences between the actual control system and virtual DCS based on virtualization system architecture were also analyzed. Therefore, the communication mechanism of the virtualization system was optimized to improve the emulation performance. Moreover, a nuclear reactor power regulation system was taken as an example. By comparing actual control system and emulation system under related application functions, the trend of curve of related parameters is basically the same, and the results proved that the method of virtualization transplantation can be applied to practical projects.

Key words: distributed control system (DCS); emulation; design and verification

CLC Number:

TP 391.9

PENG Hao，ZHANG Xu，DENG Zhiguang，JIANG Wei，LIU Mingming，ZHANG Yu，LIU Guohai. Design and Verification of Virtualization Transplantation Method for Distributed Control System[J]. Journal of Shanghai Jiaotong University, 2019, 53(Sup.1): 118-122.

References

［1］杨诗茹. 虚拟DCS组态环境的设计与开发［D］. 保定: 华北电力大学, 2016. YANG Shiru. Design and development of configuration environment of virtual DCS［D］. Baoding: North China Electric Power University, 2016. ［2］国家能源局.核电厂操纵人员培训及考试用模拟机: NB/T 20015—2010［S］.北京: 原子能出版社, 2010. National Energy Administration. Nuclear power plant simulators for use in operator training and examination: NB/T 20015—2010［S］. Beijing: Atomic Energy Press, 2010. ［3］华伟. 600 MW超临界机组仿真机设计与开发［D］. 保定: 华北电力大学, 2007. HUA Wei. Design and development of simulator on 600 MW super-critical unit［D］. Baoding: North China Electric Power University, 2007. ［4］张旭, 徐海燕, 王恺, 等. 核安全级仪控仿真系统的接口设计［J］. 现代计算机, 2019(17): 69-72. ZHANG Xu, XU Haiyan, WANG Kai, et al. Interface design of safety-class instrument control simulation system［J］. Modern Computer, 2019(17): 69-72. ［5］高汉军, 曲鸣, 李青, 等. 核电站分布式系统虚拟过程控制平台设计研究［J］. 计算机仿真, 2017, 34(2), 144-149. GAO Hanjun, QU Ming, LI Qing, et al. Research and design on virtual DCS process control plat-form in nuclear power plant［J］. Computer Integrated Manufacturing Systems, 2017, 34(2): 144-149. ［6］孙远志, 张洋, 庞智, 等.应用全范围仿真机的核电站仪控软件设计验证［J］. 计算机仿真, 2014, 31(4): 147-150. SUN Yuanzhi, ZHANG Yang, PANG Zhi, et al. A validation and verification method of I&C software of nuclear power station based on FSS［J］. Computer Integrated Manufacturing Systems, 2014, 31(4): 147-150. ［7］LIN M, YANG Z W, HOU D, et al. Applying engineering simulator to verification and validation of di-gital I&C in nuclear power plant［C］//International Conference on Nuclear Engineering. Brussels, Belgium: ASME, 2009: 729-733. ［8］HOU D, LIN M, XU Z H, et al. Development and application of an extensible engineering simulator for NPP DCS closed-loop test［J］. Annals of Nuclear Energy, 2011, 38(1): 49-55. ［9］王国旭, 吴婕, 曾碧凡, 等. 模型预测控制在压水堆堆芯功率控制中的应用［J］. 原子能科学技术, 2017, 51(3): 480-484. WANG Guoxu, WU Jie, ZENG Bifan, et al. Model predictive control method for core power control in pressurized water reactor［J］. Atomic Energy Science and Technology, 2017, 51(3): 480-484. ［10］邓志光, 吕鑫, 简一帆, 等. 基于SCADE开发的SDMC在堆芯功率控制中的应用［J］. 自动化仪表, 2019, 40(4): 103-106. DENG Zhiguang, LYU Xin, JIAN Yifan, et al. Application of SDMC developed based on SCADE in core power control［J］. Process Automation Instrumentation, 2019, 40(4): 103-106. ［11］ZHANG X, DENG Z G, LI J, et al. Design and ve-rification of reactor power control based on stepped dynamic matrix controller［J］. Science and Technology of Nuclear Installations, 2019, 2019: 1-11.doi: 10.1155/2019/4973120.

[1]	QIAN Peng, WANG Guoliang, ZHU Wenfeng. Modeling and Optimization of 3D Assembly Tolerance for Window Lifting Under Flexible Deformation [J]. Journal of Shanghai Jiaotong University, 2020, 54(11): 1134-1141.
[2]	MA Zhonghang, ZHANG Zhinan. Design and Realization of a Versatile Simulation Platform for Telecontrol Multi-Rotor Unmanned Aerial Vehicle with a Robotic Arm [J]. Journal of Shanghai Jiaotong University, 2020, 54(6): 636-642.
[3]	NI He,QIN Haibo,JIN Jiashan,SUN Fengrui . Characteristic Identification and Cavitation Analysis of Centrifugal Pump Based on Differential Evolution Algorithm with Residual Correction [J]. Journal of Shanghai Jiaotong University, 2018, 52(7): 831-836.
[4]	FU Shengping,LI Shengbo,LUO Ning. Topological Transformation and Transmission Characteristics Analysis of Vehicle Auto Transmission Based on Graph Theory [J]. Journal of Shanghai Jiaotong University, 2018, 52(3): 348-355.
[5]	PENG Cheng,ZHU Jianyun,CHEN Li. Mode Transition for a Hybrid Electric Vehicle Based on Model Reference Control [J]. Journal of Shanghai Jiaotong University, 2017, 51(10): 1196-1201.
[6]	JING Xu1,QIU Shiguang1,YIN Xuyue1,FAN Xiumin1,2,HE Qichang1,2. Stereo Correction of Binocular Images with Optical Axes Divergent Arrangement [J]. Journal of Shanghai Jiaotong University, 2015, 49(02): 141-149.
[7]	ZHENG Kai1，HU Jie1，ZHAN Zhenfei2，QI Jin1，PENG Yinghong1. Multivariate Responses Analysis for Model Validation of Dynamic Systems [J]. Journal of Shanghai Jiaotong University, 2015, 49(02): 191-195.
[8]	ZHU Wenfeng1,WANG Jie1,XIA Guoyong2,LIN Peijian1. Optimization Method of Automotive Door Sealing System with Bar Structure Based on Neural Networks [J]. Journal of Shanghai Jiaotong University, 2014, 48(03): 377-381.
[9]	SHI Xiao-Ming, ZHOU Bing-Hai. Scheduling Algorithm of Dual-Arm Multi-cluster Tools with Residency Constraints [J]. Journal of Shanghai Jiaotong University, 2013, 47(04): 650-655.
[10]	LI Cheng, JIANG Zhi-Bin, LI You, LI Na, GENG Na, YAO Shi-Qing, JIA Wen-You. Rule-Based Scheduling of Batch Processing Machine Applied to Semiconductor Wafer Fabrication System [J]. Journal of Shanghai Jiaotong University, 2013, 47(02): 230-235.
[11]	WANG Li-Quan-1, XU Yuan-Ge-1, HE Ning-2, LI Zhen-1. Modeling and Simulation of Flexible Cable Pendulum System Excited by Lifted Object Motion [J]. Journal of Shanghai Jiaotong University, 2012, 46(09): 1416-1420.
[12]	ZHENG Kai, HU Jie, PENG Ying-Hong, ZHAN Zhen-Fei, QI Jin. A Bayesian Inference Method for Model Extrapolation Together with Qualitative Knowledge [J]. Journal of Shanghai Jiaotong University, 2012, 46(06): 994-998.
[13]	WANG Jian-Wei, JIN Xian-Long, CAO Lu-Fen, ZHANG Wei-Wei. Parallel Computation for the Dynamic Response of Connectional Passage in Twin-Tunnel due to Train Load [J]. Journal of Shanghai Jiaotong University, 2012, 46(04): 591-595.
[14]	WANG Ming, MA Quan-Chao, ZHANG Wen-Guang, LUO Yun. Influence of Crimping on the Performances of Balloon Expandable Stents [J]. Journal of Shanghai Jiaotong University, 2012, 46(04): 646-650.
[15]	WANG Jian-Wei, JIN Xian-Long, WANG Xin, ZHANG Wei-Wei. Seismic Response Analysis of Connectional Passage in Twin-Tunnel Based on Parallel Computing [J]. Journal of Shanghai Jiaotong University, 2011, 45(10): 1557-1561.

Design and Verification of Virtualization Transplantation Method for Distributed Control System

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles 0

Metrics

Comments