TwoPhase Flow Resistance and Interfacial Drag in Packed Beds

Abstract

Abstract:

In order to investigate the characteristics of twophase flow resistance in packed porous media, the experiments of airwater twophase flow in packed beds with spherical particles of different sizes are performed by the test facility of DEBECO (Debris Bed Coolability). Based on the experimental data, the calculative results by different predictive models are compared and verified, and the influence of interfacial drag on pressure drop for twophase flow is analyzed emphatically. The results show that the effects of the interfacial drag on twophase flow pressure drop are negligible for packed beds with smallsize (e.g. d=1.5mm) particles, and the twophase flow pressure drop curves show an increasing tendency with the increase of air flowrates. The interfacial drag has significant influence on twophase flow pressure drop for packed beds with largesize (e.g. d=6.0mm) particles at low liquid velocities , and has a descentascent tendency in the pressure drop curve.

CLC Number:

TK 124

ZOU Xumao, LI Liangxing, KONG Liubo, WANG Huasheng. TwoPhase Flow Resistance and Interfacial Drag in Packed Beds[J]. Journal of Shanghai Jiaotong University, 2017, 51(4): 470-.

References

［1］HOLDICH R G. Fundamentals of particle technology［M］. UK: Midland Information Technology and Publishing, 2002: 14.
［2］JAMIALAHMADI M, MLLERSTEINHAGEN H, IZADPANAH M R. Pressure drop, gas holdup and heat transfer during single and twophase flow through porous media［J］. International Journal of Heat and Fluid Flow, 2005, 26(1): 156172.
［3］闫晓, 肖泽军, 黄彦平,等.多孔介质中流动换热特性的研究进展［J］.核动力工程，2006, 27(1): 7782.
YAN Xiao, XIAO Zejun, HUANG Yanping, et al. The research progress on characteristics of flow and heat transfer in porous media［J］. Nuclear Power Engineering, 2006, 27(1): 7782.
［4］郑坤灿, 温治, 王占胜. 前沿领域综述多孔介质强制对流换热研究进展［J］. 物理学报, 2012, 61(1): 18.
ZHENG Kuncan, WEN Zhi, WANG Zhansheng. Review on forced convection heat transfer in porous media［J］. Acta Physica Sinica, 2012, 61(1): 18.
［5］CHIKHI N, CLAVIER R, LAURENT J P, et al. Pressure drop and average void fraction measurements for twophase flow through highly permeable porous media［J］. Annals of Nuclear Energy, 2016, 94: 422432.
［6］TAKASUO E. An experimental study of the coolability of debris beds with geometry variations［J］. Annals of Nuclear Energy, 2016, 92: 251261.
［7］CLAVIER R, CHIKHI N, FICHOT F, et al. Experimental investigation on singlephase pressure losses in nuclear debris beds: Identification of flow regimes and effective diameter［J］. Nuclear Engineering and Design, 2015, 292: 222236.
［8］LI L, ZOU X, LOU J, et al. Pressure drops of single/twophase flows through porous beds with multisizes spheres and sands particles［J］. Annals of Nuclear Energy, 2015, 85: 290295.
［9］李良星，李会雄.尺寸颗粒堆积多孔介质床有效直径研究［J］.工程热物理学报，2014，35(9)：17851788.
LI Liangxing, LI Huixiong. An study on effective diameter of packed porous media bed with multisize particles［J］. Journal of Engineering Thermophysics, 2014, 35(9): 17851788.
［10］张楠, 孙中宁. 多孔介质通道内气液两相流动阻力特性实验［J］. 核动力工程, 2011, 32(3): 106110.
ZHANG Nan, SUN Zhongning. Experiments on resistance characteristics of gasliquid two phase flow in porous media［J］. Nuclear Power Engineering, 2011, 32(3): 106110.
［11］ERGUN S. Fluid flow through packed columns［J］. Chemical Engineering Progress, 1952, 48(2): 8994.
［12］LIPINSKI R J. A model for boiling and dryout in particle beds［R］. Washington D C: Nuclear Regulatory Commission, 1982.
［13］REED A W. The effect of channeling on the dryout of heated particulate beds immersed in a liquid pool［D］. Cambridge, USA: Massachusetts Institute of Technology, 1982.
［14］HU K, THEOFANOUS T G. On the measurement and mechanism of dryout in volumetrically heated coarse particle beds［J］. International Journal of Multiphase Flow, 1991, 17(4): 519532.
［15］SCHULENBERG T, MLLER U. An improved model for twophase flow through beds of course particles［J］. International Journal of Multiphase Flow, 1987, 13(1): 8797.
［16］TUNG V X, DHIR V K. A hydrodynamic model for twophase flow through porous media［J］. International Journal of Multiphase Flow, 1988, 14(1): 4765.
［17］SCHMIDT W. Interfacial drag of twophase flow in porous media［J］. International Journal of Multiphase Flow, 2007, 33(6): 638657.
［18］MAGALLON D. Characteristics of corium debris bed generated in largescale fuelcoolant interaction experiments［J］. Nuclear Engineering and Design, 2006, 236(19/20/21):19982009.
［19］NEMEC D, LEVEC J. Flow through packed bed reactors. 1.Singlephase flow［J］. Chemical Engineering Science, 2005, 60(24): 69476957.

[1]	YANG Zhen,FU Zhuang,GUAN Enguang,XU Jiannan,TIAN Shihe,ZHENG Hui. The Kinematic Analysis and Structure Optimization of MLattice Modular Robot [J]. Journal of Shanghai Jiaotong University, 2017, 51(10): 1153-1159.
[2]	ZHAO Jun1,YU Haidong2. Dynamic Analysis of TwoLink Flexible Manipulators Based on the Absolute Nodal Coordinate Formulation [J]. Journal of Shanghai Jiaotong University, 2017, 51(10): 1160-1165.
[3]	ZHAO Ziren1,DU Shichang1,HUANG Delin1,REN Fei2,LIANG Xinguang2. Modelling and Bottleneck Analysis of Product Quality in Transient Phase of MultiStage Manufacturing Systems Based on Markovian Chains [J]. Journal of Shanghai Jiaotong University, 2017, 51(10): 1166-1173.
[4]	HUANG Xuangui. Algorithm for Relatively Small Planted Clique with Small Edge Probability [J]. Journal of Shanghai Jiaotong University, 2017, 51(10): 1202-1206.
[5]	LUO Jingjinga,YU Haidonga,ZHAO Chunzhanga,b,WANG Haoa,b. Study on Motion Stability of Variable CrossSection Flexible Beams Based on the Absolute Nodal Coordinate Formulation [J]. Journal of Shanghai Jiaotong University, 2017, 51(10): 1174-1180.
[6]	WANG Yibo1,HUANG Yixiang1,LI Bingchu1,LING Xiao1 ZHAO Shuai1,LIU Chengliang1,ZHANG Daqing2. An Improved Modal Simulation Method for Switched Reluctance Motor Based on Static PreComputation [J]. Journal of Shanghai Jiaotong University, 2017, 51(10): 1181-1188.
[7]	ZHOU Binghai,LI Ming. Scheduling Method of Manufacturing Cells with Robot Restricted Processing [J]. Journal of Shanghai Jiaotong University, 2017, 51(10): 1214-1219.
[8]	CHEN Jinping1,ZHANG Shusheng1,HE Weiping1,WANG Mingwei1,HUANG Hui2. Feasible Change Path Search and Optimization Method Based on Driving Parameter Modeling [J]. Journal of Shanghai Jiaotong University, 2017, 51(10): 1220-1227.
[9]	ZHOU Penghui,MA Hongzhan,CHEN Dongping,CHEN Mengyue,CHU Xuening. Identification of Product Redesign Modules Based on Fuzzy Random Failure Mode and Effects Analysis [J]. Journal of Shanghai Jiaotong University, 2017, 51(10): 1189-1195.
[10]	PENG Cheng,ZHU Jianyun,CHEN Li. Mode Transition for a Hybrid Electric Vehicle Based on Model Reference Control [J]. Journal of Shanghai Jiaotong University, 2017, 51(10): 1196-1201.
[11]	LIU Wei,YANG Chao . A Study on Injection Mould Part Quotation Model Based on Back Propagation Neural Network [J]. Journal of Shanghai Jiaotong University, 2017, 51(10): 1207-1213.
[12]	CHEN Suting，WANG Zhuo，WANG Qi. Aerial Scene Classification Based on Nonlinear Scale Space [J]. Journal of Shanghai Jiaotong University, 2017, 51(10): 1228-1234.
[13]	CHEN Ning,HE Xiaobin,GUI Weihua,YANG Chunhua. Research on Image Encryption System Based on Chaotic Discrete Sequence [J]. Journal of Shanghai Jiaotong University, 2017, 51(10): 1273-1280.
[14]	LIU Kaia，ZHANG Liminb，ZHOU Lijuna. Design of Random Restricted Boltzmann Machine Group [J]. Journal of Shanghai Jiaotong University, 2017, 51(10): 1235-1240.
[15]	ZHU Xinyao1，SONG Baowei2,XU Gang1,YANG Songlin1. Research on Landing Strategy and Influencing Factors of an Autonomous Underwater Vehicle with Supporting Mechanism [J]. Journal of Shanghai Jiaotong University, 2017, 51(10): 1241-1251.