Vibration-Related Fault Diagnosis in Cold Rolling Mill by Using EEMD and SVM

Abstract

Abstract:

Abstract： By analyzing the vibration process of cold rolling and using the structure model of the rolling system, a dynamic rolling force of the rolling vertical system was built, with the consideration of the influence of rolling vibration. A data-driven fault diagnosis was proposed based on industrial field data by using ensemble empirical mode decomposition (EEMD) and support vector machine (SVM), with the focus on the generalized fault, which were mostly caused by variations of process parameters under complex working conditions. According to the decoupling effect on measured rolling force data with the EEMD algorithm, the intrinsic mode function (IMF) component was defined as fault eigenvector and chosen as the input into the classifier of vector machine. Then, the vibration-related fault of cold rolling mills could be diagnosed by the distinction between the normal state and the fault state by SVM.

Key words: rolling mill, vertical vibration, fault diagnosis, support vector machine(SVM), signal , processing

CLC Number:

TP 273

YANG Xu1,PENG Kaixiang1,LUO Hao2,KRUEGER Minjia2,ZONG Dazi1,DING Steven X2. Vibration-Related Fault Diagnosis in Cold Rolling Mill by Using EEMD and SVM[J]. Journal of Shanghai Jiaotong University, 2015, 49(06): 751-756.

References

［1］邹家祥, 徐乐江. 冷连轧机系统振动控制［M］. 北京：冶金工业出版社, 1998.

［2］Niroomand M R, Forouzan M R, Salimi M, et al. Experimental investigations and ALE finite element method analysis of chatter in cold strip rolling ［J］. ISIJ International, 2012, 52(12): 2245.

［3］Ginzburg V B. Flatrolled steel processes: Advanced technologies［M］. Boca Raton: CRC Press, 2009.

［4］Yang X, Li Q, Tong C N, et al. Vertical vibration model for unsteady lubrication in rollsstrip interface of cold rolling mills ［J］. Advances in Mechanical Engineering, 2012, Article ID 734510.

［5］Zhao H Y, Ehmann K F. Stability analysis of chatter in tandem rolling millsPart 1: Singleand multistand negative damping effect ［J］. Journal of Manufacturing Science and Engineering, 2013, 135:18.

［6］Yang X, Tong C. Coupling dynamic model and control of chatter in cold rolling ［J］. Journal of Dynamic Systems, Measurement and Control, Transactions of the ASME, 2012, 134(4): 18.

［7］Ding S X. Modelbased fault diagnosis techniques ［M］. Second Edition. Berlin: Springer, 2013.

［8］Chen J, Patton R J. Robust modelbased fault diagnosis for dynamic systems ［M］. Boston: Kluwer Academic Publishers, 1999.

［9］Kano M, Nakagawa Y. Databased process monitoring, process control and quality improvement: Recent developments and applications in steel industry ［J］. Computers and Chemical Engineering, 2008, 32(12): 1224

［10］Ding S X. Datadriven design of monitoring and diagnosis systems for dynamic processes: A review of subspace technique based schemes and some recent results ［J］. Journal of Process Control, 2014, 24: 431449.

［11］周东华, 胡艳艳. 动态系统的故障诊断技术［J］. 自动化学报, 2009, 35(6): 748758.

ZHOU Donghua, HU Yanyan. Fault diagnosis techniques for dynamic systems ［J］. Acta Automatica Sinica,2009,35(6): 748758.

［12］.杨旭, 童朝南,孟建基，等. 冷板带轧机含振动因素的轧制力模型［J］. 振动、测试与诊断, 2010, 30(4): 422428.

YANG Xu, TONG Chaonan, MENG Jianji, et al. Mathematical model of rolling force in the analysis of cold rolling chatter ［J］. Journal      of Vibration, Measurement and Diagnosis, 2010, 30(4): 422428.

［13］Lei Y G, He Z J, Zi Y Y. Application of the EEMD method to rotor fault diagnosis of rotating machinery ［J］. Mechanical System and Signal Processing, 2009, 23(2): 13271338.

［14］Peng Z K, Tse P W, Chu F L. A comparison study of improved HilbertHuang transform and wavelet transform: application to fault diagnosis for rolling bearing ［J］. Mechanical Systems and Signal Processing, 2005, 19(5): 974988.

［15］万鹏, 王红军, 徐小力. 局部切空间排列和支持向量机的故障诊断模型［J］. 仪器仪表学报, 2012, 33(12): 27892795.

WAN Peng, WANG Hongjun, XU Xiaoli. Fault diagnosis model based on local tangent space alignment and support vector   machine ［J］. Chinese Journal of Scientific Instrument,2012, 33(12): 27892795.

［16］张周锁, 李凌均, 何正嘉. 基于支持向量机的机械故障诊断方法研究［J］. 西安交通大学学报, 2002, 36(12): 13031306.

ZHANG Zhousuo, LI Lingjun, HE Zhengjia. Research on diagnosis method of machinery fault based on support vector      machine ［J］. Journal of Xi’an Jiaotong University, 2002, 36(12): 13031306.

[1]	CAO Zheng, LEI Xuelin, ZHANG Hang, CAI Xiaojiang. Cryogenic Minimal Quantity Lubrication Assisted Cutting Process for Polyimide Materials [J]. Journal of Shanghai Jiao Tong University, 2022, 56(6): 784-793.
[2]	SUN Yanyi, FAN Wenjing, ZENG Yuanfan, GAN Xingye, TANG Rijia, HAN Rui. Loading Target Identification Method Based on Harris Corner Detection [J]. Air & Space Defense, 2022, 5(4): 87-91.
[3]	XU Yong, CAI Yunze, SONG Lin. Review of Research on Condition Assessment of Nuclear Power Plant Equipment Based on Data-Driven [J]. Journal of Shanghai Jiao Tong University, 2022, 56(3): 267-278.
[4]	LIU Ning (刘宁), YUAN Zhenming* (袁贞明). Spontaneous Language Analysis in Alzheimer’s Disease:Evaluation of Natural Language Processing Technique for Analyzing Lexical Performance [J]. J Shanghai Jiaotong Univ Sci, 2022, 27(2): 160-167.
[5]	LIU Xiuli, XU Xiaoli. A Fault Diagnosis Method Based on Feature Pyramid CRNN Network [J]. Journal of Shanghai Jiao Tong University, 2022, 56(2): 182-190.
[6]	HAO Guocheng, ZHANG Bichao, GUO Juan, ZHANG Yabing, SHI Guangyao, WANG Panpan, ZHANG Wei. A High Quality Algorithm of Time-Frequency Analysis and Its Application in Radar Signal Target Detection via LMSCT [J]. Journal of Shanghai Jiao Tong University, 2022, 56(2): 231-241.
[7]	NIE Rui, WANG Hongru. Fault Diagnosis of UAV Formation Actuator Based on Neural Network Observer [J]. Air & Space Defense, 2022, 5(2): 32-41.
[8]	MA Hangyu, ZHOU Di, WEI Yujie, WU Wei, PAN Ershun. Intelligent Bearing Fault Diagnosis Based on Adaptive Deep Belief Network Under Variable Working Conditions [J]. Journal of Shanghai Jiao Tong University, 2022, 56(10): 1368-1377.
[9]	FANG Ming, ZHAO Chanjuan, ZHAO Chunlei, XU Anqi, CHEN Jian. Research on Clutter Suppression Technique for Marching Vehicle-borne Radar Based on STAP [J]. Air & Space Defense, 2022, 5(1): 71-77.
[10]	WU Jinhong,SHI Yi,CHEN Tingzhu,WANG Zhengwu. Opportunities and Challenges of 3D Printing Technology in Future Food Processing Industry· [J]. Journal of Shanghai Jiao Tong University, 2021, 55(Sup.1): 97-99.
[11]	ZHAN Zhu (占竹), ZHANG Wenjun (张文俊), CHEN Xia (陈霞), WANG Jun (汪军) . Objective Evaluation of Fabric Flatness Grade Based on Convolutional Neural Network [J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 503-510.
[12]	HE Jian, YUAN Shuang, LI Fang, YANG Beier, LI Qingbo, HE Zhimin. Target Information Intelligent Processing Technology Based on GPU+ FPGA Heterogeneous Computing Resources [J]. Air & Space Defense, 2021, 4(3): 10-16.
[13]	LI Bingchao (李炳超), WEI Jizeng (魏继增), GUO Wei (郭炜), SUN Jizhou (孙济州). Bypass-Enabled Thread Compaction for Divergent Control Flow in Graphics Processing Units [J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 245-256.
[14]	GUO Jinyao (郭金尧), LI Runhuan (李润桓), WANG Jiaojiao (王娇娇), ARRANZ Javier, LI Yiran (李怡然), CHAI Xinyu (柴新禹), WANG Jiguang (王继光), SUI Xiaohong (隋晓红) . Blood Pressure Change in Intrafascicular Vagal Activities [J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 47-54.
[15]	XU Binbin, HONG Zhen, ZHAO Lei, YU Li. Bias Attack and Detection Method for Networked Inverted Pendulum System [J]. Journal of Shanghai Jiaotong University, 2020, 54(7): 697-704.