Seam Yracking Control Mechanism and Theoretical Analysis of Welding Mobile Robot

Abstract

Abstract:

Abstract： A mobile welding robot was made, the kinematics and dynamics model of the welding mobile robot were established, and a control algorithm to achieve seam tracking of a mobile welding robot was proposed. Based on the dynamics of the mobile welding robot, the theories of sliding mode for robust control were used in the proposed control algorithm, and smooth continuous function was used instead of the traditional switching function to deduce the chattering. The effectiveness of the proposed method is verified by experiments. In the seam tracking process, the robot moves steadily without any obvious chattering.

Key words: mobile welding robot, chattering, robust control

CLC Number:

TP 273

Lv Xueqin1,ZHANG Ke2,WU Yixiong2. Seam Yracking Control Mechanism and Theoretical Analysis of Welding Mobile Robot[J]. Journal of Shanghai Jiaotong University, 2015, 49(03): 371-374.

[1]	MU Jianbin^∗ (穆建彬), YANG Haili (杨海丽), HE Defeng (何德峰). CBF-Based Distributed Model Predictive Control for Safe Formation of Autonomous Mobile Robots [J]. J Shanghai Jiaotong Univ Sci, 2024, 29(4): 678-688.
[2]	CAO Tian, ZHANG Xianku. Nonlinear Feedback Control of MIMO Unstable System for Ship Longitudinal Motion [J]. Journal of Shanghai Jiao Tong University, 2023, 57(8): 972-980.
[3]	LI Jinjiang, XIANG Xianbo, LIU Chuan, YANG Shaolong. Robust Seabed Terrain Following Control of Underactuated AUV with Prescribed Performance Guidance Law Under Time Delay of Actuator [J]. Journal of Shanghai Jiao Tong University, 2022, 56(7): 944-952.
[4]	ZHENG Tianhai, FENG Zhengping, ZHAO Shuo, PAN Wanjun. Active Disturbance Rejection Controller Based Heading Control of Underwater Flight Vehicles [J]. Journal of Shanghai Jiao Tong University(Science), 2020, 25(4): 441-446.
[5]	WANG Jian, ZHAO Hongyu, ZHONG Jihong, WANG Mengyu, CAI Zhijun. Robust Controller Design for Near Space Vehicle [J]. Air & Space Defense, 2019, 2(3): 53-58.
[6]	HE Changyu,SHI Guanglin,GUO Qinyang,WANG Dongmei. Adaptive Robust Control Strategy of Valve Controlled Asymmetric Cylinder Position Control System [J]. Journal of Shanghai Jiaotong University, 2019, 53(2): 209-216.
[7]	YUE Caicheng1,QIAN Linfang1,XU Yadong1,LI Ying2. Adaptive Fuzzy Sliding Mode Control for a Chain Driving Shell Magazine Based on an Exponential Reaching Law [J]. Journal of Shanghai Jiaotong University, 2018, 52(6): 750-756.
[8]	XU Zhangbao,MA Dawei,YAO Jianyong,DONG Zhenle,YANG Guichao. Indirect Adaptive Robust Control of DC Motors with Finite-Time Disturbance Observer [J]. Journal of Shanghai Jiaotong University, 2015, 49(09): 1281-1287.
[9]	ZHU Dongjiana,MA Ninga,b,GU Xiechonga,b. Adaptive Fuzzy Compensation Control for Nonlinear Ship CourseKeeping [J]. Journal of Shanghai Jiaotong University, 2015, 49(02): 250-254.
[10]	ZHANG Tao* (张涛), CHEN Shan-ben (陈善本). Optimal Posture Searching Algorithm on Mobile Welding Robot [J]. Journal of shanghai Jiaotong University (Science), 2014, 19(1): 84-87.
[11]	HUA Hai-de1* (华海德), MA Ning1 (马宁), MA Jie1 (马捷), ZHU Xing-yu2 (朱星宇). Robust Intelligent Control Design for Marine Diesel Engine [J]. Journal of shanghai Jiaotong University (Science), 2013, 18(6): 660-666.
[12]	LI Jia-wang1* (李家旺), WANG Xu-yang2 (王旭阳), GE Tong2 (葛彤). Adaptive Robust Control for an Active Heave Compensation System [J]. Journal of shanghai Jiaotong University (Science), 2013, 18(1): 17-24.
[13]	DENG Yong-Jun-a, WU Ming-Hui-b, CHEN Jin-Yun-a, CHEN Shan-Ben-a. Recognition of Work-piece and Location of Initial Seam Position for Mobile Welding Robot [J]. Journal of Shanghai Jiaotong University, 2012, 46(07): 1054-1058.
[14]	ZHANG Min, CHEN Xin, LU Yu-Ping, ZANG Yue-Jin. Robust Autopilot Design for Airtoair Missile Using μ Synthesis [J]. Journal of Shanghai Jiaotong University, 2011, 45(03): 418-422.
[15]	QU Xin,REN Zhang,SONG Jianshuang,WANG Junbo . Modeling and Disturbance Observer Based Control for a Hypersonic Vehicle [J]. Journal of Shanghai Jiaotong University, 2011, 45(02): 272-0276.

Seam Yracking Control Mechanism and Theoretical Analysis of Welding Mobile Robot

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments