Normal Contact Stiffness Fractal Model Considering Asperity Elastic-Plastic Transitional Deformation Mechanism of Joints

Abstract

Abstract:

Abstract： Based on the contact mechanics theory, the deformation behavior of a single contacting asperity was studied, a micro contact model was proposed considering elastic-plastic transition deformation mechanism of rough surface joints, and a mathematical model of normal contact load and contact stiffness were established. Besides, the fractal model of mechanical joints normal contact load and contact stiffness were presented based on the fractal geometry theory. The results show that the plasticity index is lesser, the relationship between normal contact load and contact stiffness is approximately linear, and with the plastic index increasing, the relationship between normal contact load and contact stiffness is strongly nonlinear. The normal contact stiffness increases with increasing fractal dimension and normal contact load and decreases with increasing dimensionless fractal scale parameters. Moreover, the joints normal contact stiffness whose machining surface were milled and ground were calculated respectively by using the present model. The comparion of test results show that the present model is consistent with the experiment result.

Key words: machine joints, normal contact stiffness, elasticplastic contact, fractal model, asperity

CLC Number:

TH 113

HE Liange，ZUO Zhengxing，XIANG Jianhua. Normal Contact Stiffness Fractal Model Considering Asperity Elastic-Plastic Transitional Deformation Mechanism of Joints[J]. Journal of Shanghai Jiaotong University, 2015, 49(01): 116-121.

References

［1］Fu W P，Huang Y M，Zhang X L．Experimental investigation of dynamic normal characteristics of machined joint surfaces［J］．ASME Journal of Vibration and Acoustics，2000，122(4): 393398．

［2］Ahmadian H，Jalali H．Identification of bolted lap joints parameters in assembled structures［J］．Mechanical Systems and Signal Processing，2007，21(2): 10411050．

［3］Shiryayev O V，Page S M，Pettit C L，et al．Parameter estimation and investigation of a bolted joint model［J］．Journal of Sound and Vibration，2007，307(35): 680697．

［4］Greenwood J A，Williamson J B P．Contact of nominally flat surfaces［C］∥ Proceedings of the Royal Society of London Series A, Mathematical and Physical Sciences. London: The Royal Society,1966，295: 300319．

［5］Chang W R, Etsion I, Bogy D B. An elasticplasticmodel for the contact of rough surfaces［J］. ASME Journal of Tribology，1987, 109(2): 257263．

［6］HandzelPowierza Z, Klimczak T, Polijaniuk A．On the experimental verification of the GreenwoodWilliamson model for the contact of rough surfaces［J］．Wear，1992，154（1）：115124．

［7］Zhao Y W，David D M，Chang L．An asperity microcontact model incorporating the transition from elastic deformation to fully plastic flow［J］．ASME Journal of Tribology，2000，122（1）：8693．

［8］Kogut L，Etsion I．Elasticplastic contact analysis of a sphere and rigid flat［J］．Journal of Applied Mechanics，2002，69：657662．

［9］赵永武，吕彦明，蒋建忠．新的粗糙表面弹塑性接触模型［J］．机械工程学报，2007，43(3)：95101．

ZHAO Yongwu，L Yanming，JIANG Jianzhong．New elasticplastic model for the contact of rough surfaces［J］．Chinese Journal of Mechanical Engineering，2007，43(3)：95101．

［10］Jiang S Y，Zheng Y J，Zhu H．A contact stiffness model of machined plane joint based on fractal theory［J］．Journal of Tribology，2010，132（1）：140117．

［11］杨红平，傅卫平，王雯，等．基于分形几何与接触力学理论的结合面法向接触刚度计算模型［J］．机械工程学报，2013，49(1)：102107．

YANG Hongping，FU Weiping，WANG Wen，et al．Calculation model of the normal contact stiffness of joints based on the fractal geometry and contact theory［J］．Chinese Journal of Mechanical Engineering，2013，49(1)：102107．

［12］张学良，黄玉美，傅卫平.粗糙表面法向接触刚度的分形模型［J］.应用力学学报，2000，17(2)：3135.

ZHANG Xueliang，HUANG Yumei，FU Weiping. Fractal model of normal contact stiffness between rough surfaces［J］.Chinese Journal of Applied Mechanics，2000，17(2)：3135．

［13］温淑花，张学良，武美先，等.结合面法向接触刚度分形模型与仿真［J］.农业机械学报，2009，40(11)：197202.

WEN Shuhua，ZHANG Xueliang，WU Meixian，et al. Fractal model and simulation of normal contact stiffness of joint interfaces and its simulation［J］.Transactions of the Chinese Society for Agricultural Machinery，2009，40(11)：197202．

［14］Shi X，Polycarpou A A．Investigation of contact stiffness and contact damping for magnetic storage headdisk interfaces［J］．ASME Journal of Tribology，2008，130(2): 02190119．

[1]	CHEN Yu，TENG Kenan,TANG Jinguo，WANG Liying. Optimal Estimation of Fractal Dimension for Two-Dimension Sea Surface Infrared Image [J]. Journal of Shanghai Jiaotong University, 2018, 52(8): 1003-.
[2]	CHEN Hongxu,DONG Guanhua,XIE Luofeng,YIN Ming,YIN Guofu. A Piecewise Calculation Model for Fractal Rough Surface Contact Deformation [J]. Journal of Shanghai Jiaotong University, 2018, 52(6): 722-728.
[3]	CAO Ling1,2* (曹玲), ZHANG Hua1 (张华), CHEN Yong1 (陈勇). Hydraulic Properties Analysis of the Unsaturated Cracked Soil [J]. Journal of shanghai Jiaotong University (Science), 2017, 22(1): 35-044.
[4]	TIAN Hongliang，ZHENG Jinhua，ZHAO Chunhua，ZHAO Xinze，FANG Zifan，ZHU Dalin. Calculating Method of Surface Dissipation Factor and Normal Damping [J]. Journal of Shanghai Jiaotong University, 2015, 49(05): 687-695.
[5]	ZHUANG Yan, LI Bao-Tong, HONG Jun, YANG Guo-Qing, ZHU Lin-Bo, LIU Hui-Jing. A Normal Contact Stiffness Model of the Interface [J]. Journal of Shanghai Jiaotong University, 2013, 47(02): 180-186.
[6]	YOU Jin-Min, CHEN Tian-Ning. Estimation for Normal Parameters of Joint Surfaces Based on Fractal Theory [J]. Journal of Shanghai Jiaotong University, 2011, 45(09): 1275-1280.