Machine Tool Positioning Error Compensation Based on Adaptive Segmentation and Dynamic Modification

Abstract

Abstract:

To improve and maintain the machining accuracy of machine tools, this paper proposed a novel compensation method based on adaptive segmentation modeling and dynamic modification. This algorithm can figure out the exact segmentation intervals and the best-fitting polynomial automatically according to the positioning error curve shape and the modeling accuracy requirement. In addition, the compensation model is not a fixed algorithm. It can monitor the real-time temperature field of machine tools, the ambient temperature variation, as well as the working conditions of coolant, and adjust the coefficients for the compensation model. Compensation experiments on the machining center VM850 showed that the compensation method could meet the requirement of realtime error compensation under complex working conditions, with its excellent modeling accuracy and robustness.

Key words: machine tool, positioning error, adaptive modeling, dynamic modification, realtime compensation

CLC Number:

TH 161

LI Zihan,YANG Jianguo,ZHANG Yi,YAO Xiaodong. Machine Tool Positioning Error Compensation Based on Adaptive Segmentation and Dynamic Modification

[J]. Journal of Shanghai Jiaotong University, 2014, 48(1): 27-32.

References

［1］Ramesh R, Mannan M A, Poo A N. Error compensation in machine toolsa review Part ΙΙ: Thermal errors［J］. International Journal of Machine Tools and Manufacture, 2000, 40(9): 12571284.

［2］Wu C H, Kung Y T. Thermal analysis for the feed drive system of a CNC machine center［J］. International Journal of Machine Tools and Manufacture, 2003, 43(15):15211528.

［3］王福吉，贾振元，阳江源，等. 基于动态模糊神经网的机床时变定位误差补偿［J］.机械工程学报，2011, 47(13):175179.

WANG Fuji, JIA Zhenyuan, YANG Jiangyuan, et al. Timevarying position error compensation of machine tools based on dynamic fuzzy neural networks［J］. Journal of Mechanical Engineering, 2011, 47(13): 175179.

［4］Pahk H J, Lee S W. Thermal error measurement and real time compensation system for the CNC machine tools incorporating the spindle thermal error and the feed axis thermal error［J］. International Journal of Advanced Manufacturing Technology, 2002, 20(7): 487494.

［5］张毅，杨建国．基于灰色神经网络的机床热误差建［J］.上海交通大学学报，2011, 45(11): 15811586.

ZHANG Yi, YANG Jianguo. Grey neural network modeling for machine tool thermal error［J］. Journal of Shanghai Jiaotong University, 2011, 45(11): 15811586.

［6］李永祥，杨建国，郭前建．数控机床热误差的混合预测模型及应用［J］．上海交通大学学报，2006, 40(12): 20302033.

LI Yongxiang, YANG Jianguo, GUO Qianjian. The application of hybrid prediction model to thermal error modeling on NC machine tools［J］. Journal of Shanghai Jiaotong University, 2006, 40(12): 20302033.

［7］王秀山,杨建国,闫嘉钰.基于多体系统理论的五轴机床综合误差建模技术［J］.上海交通大学学报, 2008, 42(5): 761764.

WANG Xiushan, YANG Jianguo, YAN Jiayu. Synthesis error modeling of the fiveaxis machine tools based on multibody system theory［J］. Journal of Shanghai Jiaotong University, 2008, 42(5): 761764.

［8］林伟青，傅建中，陈子辰，等．数控机床热误差的动态自适应加权最小二乘支持矢量机建模方法［J］．机械工程学报，2009, 45(3): 178182.

LIN Weiqing, FU Jianzhong, CHEN Zichen, et al. Modeling of NC machine tool thermal error based on adaptive bestfitting WLSSVM［J］. Journal of Mechanical Engineering, 2009, 45(3): 178182.

［9］Prat K B, Fink E. Search for patterns in compressed time series［J］. International Journal of Image and Graphics, 2002, 2(1): 89106.

［10］Wu W B, Zhao Z B. Inference of trends in time series［J］. Journal of the Royal Statistical Society: Series B (Statistical Methodology), 2007, 69(3): 391410.

［11］杨建国，邓卫国，任永强，等. 机床热补偿中温度变量分组优化建模［J］. 中国机械工程，2004, 15(6): 478481.

YANG Jianguo, DENG Weiguo, REN Yongqiang, et al. Grouping optimization modeling by selection of temperature variables for the thermal error compensation on machine tools［J］. China Mechanical Engineering, 2004, 15(6): 478481.

［12］ISO 2302: 2006. Test code for machine tools—Part 2: Determination of accuracy and repeatability of positioning numerically controlled axes［S］.

[1]	ZHAO Liang,LEI Mohan,ZHU Xingxing,WANG Shuai,LING Zheng,YANG Jun,MEI Xuesong. A New Thermal Error Control Method for Spindle System of High Precision Computer Numerical Control Machine Tools [J]. Journal of Shanghai Jiaotong University, 2020, 54(11): 1165-1171.
[2]	TUO Zhanyu,HUANG Yiqiao,SHEN Muwen,YANG Jianguo. Modeling of Geometric and Thermal Complex Positioning Error of CNC Machine Tools Based on Cubic Spline Interpolation [J]. Journal of Shanghai Jiaotong University, 2016, 50(05): 668-672.
[3]	YAO Xiaodong1,3,HUANG Yiqiao1,MA Xiaobo2,XUE bo3,YANG Jianguo1. Thermal Error Modeling and RealTime Compensation of CNC Machine Tools Based on Time Series Method [J]. Journal of Shanghai Jiaotong University, 2016, 50(05): 673-679.
[4]	FENG Wenlong,HUANG Yiqiao,TUO Zhanyu,LI Huimin,YANG Jianguo. Modeling of Thermally Induced Grating Positioning Error of Large Machine Tools Based on Temperature Integral Method [J]. Journal of Shanghai Jiaotong University, 2016, 50(05): 710-715.
[5]	DONG Guanhua,YIN Qin,YIN Guofu,XIANG Zhaowei. Identification and Modeling of Coupling Dynamic Stiffness in Joints of Machine Tool [J]. Journal of Shanghai Jiaotong University, 2015, 49(09): 1263-1434.
[6]	REN Lina,RUI Zhiyuan,LIU Jun,LEI Chunli. Whole Lifecycle Reliability Assessment of Multiple NC Machine Tools with Minimal Repair [J]. Journal of Shanghai Jiaotong University, 2015, 49(01): 19-23.
[7]	WANG Wei,YANG Jianguo. Compound Error Compensation Technique for CNC Machine Tools Based on Interpolation Method [J]. Journal of Shanghai Jiaotong University, 2014, 48(1): 12-21.
[8]	ZHU Xiaolong,YANG Jianguo,DAI Guisong. AVQ Clustering Algorithm and OIF-Elman Neural Network for Machine Tool Thermal Error [J]. Journal of Shanghai Jiaotong University, 2014, 48(1): 22-26.
[9]	XIAO Huixiao,YANG Jianguo,ZHANG Yi. Dynamic Modeling of Machine Tool Thermal Error Based on the State-Space Model [J]. Journal of Shanghai Jiaotong University, 2014, 48(1): 22-26.
[10]	LIN Jintao,BI Qinzhen,WANG Yuhan,SUN Chao. Spiral Tool Path Generation for Pocket Machining [J]. Journal of Shanghai Jiaotong University, 2014, 48(08): 1200-1204.
[11]	WANG Zhiming1,YANG Jianguo2. Bayesian Reliability Assessment for Numerically Controlled Machine Tools with Imperfect Repair [J]. Journal of Shanghai Jiaotong University, 2014, 48(05): 614-617.
[12]	LI Liangliang,DU Zhengchun. Model Analysis of a Novel Error Measurement Device of Five-axis Manufacturing Center [J]. Journal of Shanghai Jiaotong University, 2013, 47(11): 1801-1806.
[13]	JIANG Hui,YANG Jianguo,LI Zihan,YAO Xiaodong. Application of Real Time Compensation with Combinative Thermal Error Prediction Model Based on Error Separation on CNC Machine Tools [J]. Journal of Shanghai Jiaotong University, 2013, 47(05): 744-749.
[14]	YANG Yi1，YAO Xiaodong1，YANG Jianguo1,ZHANG Yusheng2，YUAN Feng2. Thermo-Drifting Error Modeling of Spindle Based on Combination of Principal Component Analysis and BP Neural Network [J]. Journal of Shanghai Jiaotong University, 2013, 47(05): 750-753.
[15]	WANG Zhi-Ming-1, YANG Jian-Guo-2. Bounded Intensity Process and Its Applications in Reliability Assessment of NC Machine Tools [J]. Journal of Shanghai Jiaotong University, 2012, 46(10): 1622-1626.