Experimental Study of Hot Stamping Process of B1500HS Ultra High Born Steel

Abstract

Abstract:

Abstract： In order to determine the heating specification of coldrolled boron steel B1500HS with a thickness of 1.8 mm, the effect of austenitizing temperature and soaking time on the quenching microstructures, original austenite grain sizes and mechanical properties were investigated. The Vshaped bending die with a cooling channel was used to conduct the hot stamping experiment of B1500HS steel and cold stamping test of M1200 fully martensite steel. The results indicate that the tensile strength of hot stamping part is up to 1.530 GPa, and the profile has a perfect precision with almost no springback. Compared with the hot stamping process of B1500HS, the cold stamping process of M1200 martensite steel requires much higher forming load, approximately 750 kN, which is twice as much as that of hot stamping process. In addition, the part of cold stamping obviously has springback and the springback angle is approximately 9°.
Key words：

Key words: boron steel, martensite steel, hot stamping

CLC Number:

TG 115

ZHANG Lei,ZHAO Yuzhang,WANG Wurong,WEI Xicheng. Experimental Study of Hot Stamping Process of B1500HS Ultra High Born Steel[J]. Journal of Shanghai Jiaotong University, 2015, 49(01): 12-18.

References

［1］kerstrm P. Numerical simulation of a thermomechanical sheet metal forming experiment［D］. Sweden: Lule University of Technology, 2006.

［2］马宁, 胡平, 闫康康, 等. 高强度硼钢热成形技术研究及其应用［J］. 机械工程学报, 2011, 46(14): 6872.

MA Ning, HU Ping, YAN Kangkang, et al. Research on boron steel for hot forming and its application［J］. Journal of Mechanical Engineering, 2011, 46(14): 6872.

［3］Norrbottens J A B. Manufacturing a steel article［P］. United Kingdom Patent: GB1490535A, 1977.

［4］徐伟力, 艾健, 罗爱辉. 钢板热冲压新技术介绍［J］. 塑性工程学报, 2009, 16(4): 3943.

XU Weili, AI Jian, LUO Aihui. Introduction of sheet metal hotforming［J］. Journal of Plasticity Engineering, 2009, 16(4): 3943.

［5］姜超, 单忠德, 庄百亮, 等. 热冲压成形22MnB5钢板的组织和性能［J］. 材料热处理学报, 2012, 33(3): 7881.

JIANG Chao, SHAN Zhongde, ZHUANG Bailiang, et al. Microstructure and properties of hot stamping 22MnB5 steel［J］. Transactions of Materials and Heat Treatment, 2012, 33(3): 7881.

［6］Abbasi M, SaeedAkbari A, Naderi M.The effect of strain rate and deformation temperature on the characteristics of isothermally hot compressed boronalloyed steel［J］. Materials Science and Engineering A, 2012, 538: 356363.

［7］Nikravesh M, Naderi M, Akbari G H. Influence of hot plastic deformation and cooling rate on martensite and bainite start temperatures in 22MnB5 steel［J］. Materials Science and Engineering A, 2012, 540: 2429.

［8］Min J Y, Lin J P, Min Y A. Effect of thermomechanical process on the microstructure and secondarydeformation behavior of 22MnB5 steels［J］. Journal of Materials Processing Technology, 2013, 213(6): 818825.

［9］贺连芳, 赵国群, 李辉平, 等. 基于响应曲面方法的热冲压硼钢B1500HS淬火工艺参数优化［J］. 机械工程学报, 2011, 47(8): 7782.

HE Lianfang, ZHAO Guoqun, LI Huiping, et al. Optimization of quenching parameters for hot stamping boron steel B1500HS based on response surface methodology［J］. Journal of Mechanical Engineering, 2011, 47(8): 7782.

［10］李辉平, 赵国群, 贺连芳, 等. 热冲压硼钢B1500HS高温本构方程的研究［J］. 机械工程学报, 2012, 48(8): 2127.

LI Huiping, ZHAO Guoqun, HE Lianfang, et al.Research on the constitutive relationship of hot stamping boron steel B1500HS at high temperature［J］. Journal of Mechanical Engineering, 2012, 48(8): 2127.

［11］颜震, 韩先洪, 郝新, 等. 热冲压用硼钢B1500HS的高温热力学性能实验［J］. 塑性工程学报, 2013, 20(3): 97101.

YAN Zhen, HAN Xianhong, HAO Xin, et al. Experimental study on thermodynamic performance of boron steel B1500HS used for hot stamping process［J］. Journal of Plasticity Engineering, 2013, 20(3): 97101.

［12］王春芳, 王毛球,时捷,等.利用 EBSD 技术研究板条马氏体钢的微观组织及力学性能的关系［C］// 第二届全国电子背散射衍射技术及其应用会议论文集. 北京: 中国体视学学会, 2007.

［13］Hall E O. The deformation and ageing of mild steel: Ⅲ Discussion of results［J］. Proceedings of the Physical Society: Section B, 1951, 64(9): 747753.

［14］Petch N J. The cleavage strength of polycrystals［J］. Journal of the Iron and Steel Institute, 1953, 174: 25.

［15］侯红苗. 热成形工艺对高强度钢性能的影响［D］. 长春: 吉林大学材料科学与工程学院, 2013.

［16］谷诤巍, 孟佳, 李欣, 等. 超高强钢热成形奥氏体化加热参数的优化［J］. 吉林大学学报:工学版, 2011, 41(2): 194197.

GU Zhengwei, MENG Jia, LI Xin, et al. Research on optimization of the heating parameters of the ultra high strength steel’s austenization in hot stamping process［J］. Journal of Jilin University: Engineering and Technology Edition, 2011, 41(2): 194197

[1]	JIANG Yihan, WU Jiasong, WANG Wurong, WEI Xicheng. Effect of Mold Heating on High-Temperature Friction and Wear Characteristics of Uncoated 22MnB5 Boron Steel [J]. Journal of Shanghai Jiao Tong University, 2021, 55(3): 258-264.
[2]	GAO Kaixiang,WANG Wurong,WEI Xicheng,MENG Hua. High-Temperature Friction of Uncoated 22MnB5 Boron Steel in Hot Stamping [J]. Journal of Shanghai Jiaotong University, 2019, 53(9): 1136-1142.
[3]	DING Yanan，TAN Shulin，HAN Xianhong，CUI Zhenshan. Model of Properties Prediction for Boron Steel Hot Stamping Products and Its Validation in a U-Cap Part [J]. Journal of Shanghai Jiaotong University, 2017, 51(11): 1320-1327.