Experimental Analysis of Surface Pressure Distribution of Piston Pin Hole

Abstract

Abstract:

Aimed at the problem of easy failure of piston pin hole, a novel method to analyze the surface pressure distribution of piston pin hole was established, in which an experiment was designed to measure the pressure data using pressure indicating film. The training set and test set was used to fit and evaluate the data. A case study of the surface pressure distribution of a piston pin hole was excogitated by training analysis of the collected data, which indicated that the surface pressure distribution could be better expressed. The surface pressure distribution of piston pin hole provides theoretical reference for the design, optimization and FEA of piston pin hole.

Key words: pressure indicating film, piston pin hole, surface pressure, distribution

CLC Number:

TK 401.1

HU Yuping1,WANG Enhao1,WANG Renxin2,GONG Tingting1. Experimental Analysis of Surface Pressure Distribution of Piston Pin Hole[J]. Journal of Shanghai Jiaotong University, 2013, 47(08): 1318-1323.

References

［1］Pulkrabek W W. Engineering fundamentals of the internal combustion engine［M］. New Jersey: Prentice Hall, 2003.

［2］Esfahanian V, Javaheri A, Ghaffarpour M. Thermal analysis of an SI engine piston using different combustion boundary condition treatments［J］.Applied Thermal Engineering, 2006(26):277287.

［3］Wang Yanxia, Liu Yongqi, Shi Haiyan. Simulation and analysis of thermomechanical coupling load and mechanical dynamic load for a piston［C］∥ ICCMS 2010－2010 International Conference on Computer Modeling and Simulation. United States: IEEE Computer Society,2010:106110.

［4］Cao Don, Doll Gary L. Contact mechanics of a high load capacity piston pin［C］∥ 2008 Proceedings of the STLE/ASME International Joint Technology Conference, IJTC 2008. United States: ASME, 2009: 485487.

［5］刘世英．内燃机活塞机械疲劳损伤与可靠性研究［D］. 济南：山东大学能源与动力工程学院，2007.

［6］张文利.活塞销孔结构设计与试验研究［D］. 济南：山东大学机械工程学院，2006.

［7］张执南，谢友柏. 考虑连杆曲轴变惯性影响的活塞二阶运动分析［J］. 上海交通大学学报，2010,44(4):555~559.

ZHANG Zhinan, XIE Youbai. Effects of connecting rod crankshaft variable inertia on piston secondary motion ［J］. Journal of Shanghai Jiaotong University，2010,44(4):555559.

［8］蔡曲林.基于概率神经网络的模式识别［D］.长沙：国防科学技术大学理学院, 2005.

［9］南东. RBF和MLP神经网络逼近能力的几个结果［D］. 大连：大连理工大学数学科学学院, 2007.

［10］王振雷,李鸿儒,顾树生.神经网络过学习问题的统计学分析及改进算法［J］.东北大学学报(自然科学版),2001,22(4):358361.

WANG Zhenlei，LI Hongru，GU Shusheng. Statistics analysis of overfitting of neural networks and new algorithm［J］. Journal of Northeastern University (Natural Science), 2001, 22(4):358361.

［11］佟景伟，李林安，李鸿琦，等．在温度和机械载荷作用下活塞应力与变形的三维有限元分析［J］. 内燃机学报, 1995, 13(2):123131.

TONG Jingwei, LI Linan, LI Hongqi, et al. 3D finite element analysis of stress and deformation of piston under the action of thermal and mechanical load［J］. Transactions of CSICE, 1995, 13(2):123131

[1]	QUAN Daying, CHEN Yun, TANG Zeyu, LI Shitong, WANG Xiaofeng, JIN Xiaoping. Radar Signal Recognition Based on Dual Channel Convolutional Neural Network [J]. Journal of Shanghai Jiao Tong University, 2022, 56(7): 877-885.
[2]	CAI Shuyu∗ (蔡舒妤), SHI Lizhong (师利中). Airframe Damage Region Division Method Based on Structure Tensor Dynamic Operator [J]. J Shanghai Jiaotong Univ Sci, 2022, 27(6): 757-767.
[3]	LU Pengli1∗ (卢鹏丽), DONG Chen1,2 (董晨), GUO Yuhong3 (郭育红). A Novel Method Based on Node's Correlation to Evaluate Important Nodes in Complex Networks [J]. J Shanghai Jiaotong Univ Sci, 2022, 27(5): 688-698.
[4]	CHEN Chun, GAO Jing, CAO Yijia, WANG Weiyu, ZHAO Long. Voltage and Frequency Suppression of Intentional Islanding Restoration Process for Distribution System with Multi-Generations [J]. Journal of Shanghai Jiao Tong University, 2022, 56(5): 543-553.
[5]	ZENG Bo, MU Hongwei, DONG Houqi, ZENG Ming. Optimization of Active Distribution Network Operation Considering Decarbonization Endowment from 5G Base Stations [J]. Journal of Shanghai Jiao Tong University, 2022, 56(3): 279-292.
[6]	WUYonghu, LV Huanhuan, YUTing, LANZhigang. Electrical System Scheme Analysis of a 10 MW Ocean Thermal Energy Conversion Plant [J]. Ocean Engineering Equipment and Technology, 2022, 9(1): 46-51.
[7]	LI Guanyu (李冠玉), ZHANG Fengqin (张凤芹), LIU Qiegen (刘且根) . Distribution-Transformed Network for Impulse Noise Removal [J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 543-553.
[8]	YANG Mengyao, MAO Lulu, HAN Zhaolong, ZHOU Dai, LEI Hang, CAO Yu. Wind Vibration and Vibration Reduction of a H-Rotor Type Three-Bladed Vertical Axis Wind Turbine [J]. Journal of Shanghai Jiao Tong University, 2021, 55(4): 347-356.
[9]	ZHANG Jingbo, YANG Jian, WANG Feiliang. Progressive Collapse Resistance Analysis of Precast Concrete Frames with Infill Walls [J]. Journal of Shanghai Jiao Tong University, 2021, 55(4): 357-364.
[10]	YAO Shun, MA Ning, DING Junjie, GU Xiechong. Numerical Simulation and Uncertainty Analysis of Wave-Co-Current Interaction with Irregular Waves [J]. Journal of Shanghai Jiao Tong University, 2021, 55(3): 337-346.
[11]	ZHOU Shichao, LIU Xiaolin, XIONG Zhan, WANG Xu, JIANG Chuanwen, ZHANG Shenxi. Line Hardening and Energy Storage System Configuration Strategies for Resilience Enhancement of a Hybrid AC-DC Distribution System [J]. Journal of Shanghai Jiao Tong University, 2021, 55(12): 1619-1630.
[12]	YANG Bo, YU Lei, WANG Junting, SHU Hongchun, CAO Pulin, YU Tao. Optimal Sizing and Placement of Distributed Generation Based on Adaptive Manta Ray Foraging Optimization [J]. Journal of Shanghai Jiao Tong University, 2021, 55(12): 1673-1688.
[13]	WANG Wei, WANG Bing, HU Xiong, SUN Dejian. Online Degradation Assessment of Shore Bridge Hoisting Gearbox Based on Improved Symbolic Sequence Entropy and Logistic Regression Model [J]. Journal of Shanghai Jiao Tong University, 2021, 55(10): 1272-1280.
[14]	DONG Xiangxiang, LÜ Runyan, CAI Yunze*. A Variational Bayes-Based Filter with Uncertain Heavy-Tailed Noise [J]. Journal of Shanghai Jiaotong University, 2020, 54(9): 881-889.
[15]	WANG Wei, LI Aote, YU Junli. A Design Method for Flow Distribution in Micro-Combustor Based on Target Flow Fitting [J]. Journal of Shanghai Jiaotong University, 2020, 54(9): 1000-1006.