[1]文志飞. 船舶砰击载荷的计算方法研究[D],哈尔滨:哈尔滨工程大学船舶工程学院,2010. [2]Ochi M K, Motter L E. Prediction of slamming characteristics and hull response for ship design[J]. Transactions SNAME, 1973, 81:144176. [3]Kawakami M, Michimoto J, Kobayashi K. Prediction of long term whipping vibration stress due to slamming of large ships in rough sea[J]. International Shipbuilding Progress, 1977, 24:83110. [4]陈震. 海洋结构物入水砰击载荷与响应研究[D]. 上海: 上海交通大学船舶海洋与建筑工程学院, 2005. [5]陈震, 张世联, 肖熙. 船舶外飘砰击有效砰击角概率分布[J]. 上海交通大学学报, 2010, 44(10): 14051408. CHEN Zhen, ZHANG Shilian, XIAO Xi. Probability distribution of effective impact angle of ship bow flare impact[J]. Journal of Shanghai Jiaotong University, 2010, 44(10): 14051408. [6]陈占阳,任慧龙,李辉,等. 超大型船舶变截面梁分段模型的载荷试验研究[J]. 哈尔滨工程大学学报,2012,33(3):16. CHEN Zhanyang,REN Huilong,LI Hui,et al. The wave load experimental investigation of segmented model of a very large ship based on variable crosssection beams[J]. Journal of Harbin Engineering University, 2012,33(3):16. [7]CHEN Zhanyang,REN Huilong,LI Hui,et al. Experimental and numerical analysis of bow slamming and whipping in different sea states[J]. Journal of Ship Mechanics,2012, 16(3):246253. [8]任慧龙,陈占阳. 自航与拖航试验对船体载荷响应影响的研究[J]. 华中科技大学学报:自然科学版, 2012,40(11):8488. REN Huilong,CHEN Zhanyang. Effect of self propulsion and towing test on ship load response[J]. J Huazhong Univ of Sci & Tech: Natural Science Edition, 2012,40(11):8488. [9]Stavovy A B,Chuang S L. Analytical determination of slamming pressure for high speed vehicles in waves[J]. Journal of Ship Research, 1976, 20(4): 190198. [10]陈震, 肖熙. 平底结构砰击压力峰值分析[J]. 上海交通大学学报,2006,40(6):983987. CHEN Zhen, XIAO Xi. Analysis about the slamming pressure peak value on a flatbottom structure[J]. Journal of Shanghai Jiaotong University, 2006,40(6):983987. |