Experimental Study of Mechanical Properties of Lime Stabilized Expansive Soil under the Condition of Eluviations

Abstract

Abstract:

In order to investigate the effect of eluviations on the mechanic performance of lime stabilized expansive soil, laboratory tests were conducted to reveal the influencing rules of lime proportion and age on the swellshrink properties of stabilized expansive soil. An optimal lime proportion was derived, a measuring device of eluviations was designed and the detailed test steps were given for reference. Besides, the variation law of the content of Ca2+ and the strength indexes with leaching days were discussed according to leaching tests. Based on the results of the laboratory tests, it is found that the cohesion force of the stabilized soils decreases with the decrease of the content of Ca2+, however, the internal friction angle remains constant. The influence of the decrease of the content of Ca2+ on the strength is disadvantageous to the long-term performance of subgrade.

Key words: lime stabilized expansive soil, eluviations effect, content of Ca2+, mechanical property

CLC Number:

TU 501

FAN Yongfeng. Experimental Study of Mechanical Properties of Lime Stabilized Expansive Soil under the Condition of Eluviations[J]. Journal of Shanghai Jiaotong University, 2013, 47(09): 1390-1394.

References

［1］Shi Bin, Li Shenglin. Quantitative approach on SEM images of microstructure of clay soils ［J］. Science in China, 1995, 38(6): 74l748．

［2］Lee M R, Yeh Y C, Hsiang W S, et al. Solidphase microextraction and gas chromatographymass spectrometry for determining chlorophenols from landfill leaches and soil ［J］. Journal of Chromatography A, 1998, 806(2): 317324.

［3］张小平, 施斌, 陆现彩. 石灰改良膨胀土微孔结构试验研究［J］. 岩土工程学报, 2003, 25(6): 761763.

ZHANG Xiaoping, SHI Bin, LU Xiancai. Experimental study on micropore structure of expansive soil improved by lime ［J］. Chinese Journal of Geotechnical Engineering, 2003, 25(6): 761763.

［4］AlRawas A A, Taha R, Nelson J D, et al. A comparative evaluation of various additives used in the stabilization of expansive soils ［J］. Geotechnical Testing Journal, 2002, 25(2): 199209.

［5］AlRawas A A, Hago A W, AlSarmi H. Effect of lime, cement and Sarooj (artificial pozzolan) on the swelling potential of an expansive soil from Oman ［J］. Building and Environment, 2005, 40(5): 681687.

［6］陈善雄. 膨胀土工程特性与处治技术研究［D］. 武汉:华中科技大学土木工程与力学学院, 2006.

［7］陈善雄, 孔令伟, 郭爱国. 膨胀土工程特性及其石灰改性试验研究［J］. 岩土力学, 2002, 23(S1): 912.

CHEN Shanxiong, KONG Lingwei, GUO Aiguo. Experimental research on engineering properties of expansive soil and lime stabilized soil ［J］. Rock and Soil Mechanics, 2002, 23(S1): 912.

［8］Meroi E A, Schrefler B A, Zienkiewicz O C. Large strain static and dynamic semisaturated soil behavior ［J］. International Journal for Numerical and Analytical Methods in Geomechanics, 1995, 19(2): 81106.

［9］Schrefler B A, Scotta R. A fully coupled dynamic model for twophase fluid flow in deformable porous media ［J］. Computer Methods in Applied Mechanics and Engineering, 2001, 190(5): 32233246.

［10］包承纲. 非饱和土的性状及膨胀土边坡稳定问题［J］. 岩土工程学报, 2004, 26(1): 115.

BAO Chenggang. Behavior of unsaturated soil and stability of expansive soil slope ［J］. Chinese Journal of Geotechnical Engineering, 2004, 26(1): 115.

［11］姚海林, 程平, 吴万平. 基于固结试验的膨胀土地基变形预测方法［J］. 岩石力学与工程学报, 2005, 24(21): 39113915.

YAO Hailin, CHENG Ping, WU Wanping. Prediction of ground heaves in expansive soils based on consolidation tests ［J］. Chinese Journal of Rock Mechanics and Engineering, 2005, 24(21): 39113915.

［12］Rao S M, Reddy B V, Muttharam M. The impact of cyclic wetting and drying on the swelling behavior of stabilized expansive soils ［J］. Engineering Geology, 2001, 60(14): 223233.

［13］Quyum A, Achari G, Goodman R H. Effect of wetting and drying and dilution on moisture migration through oil contaminated hydrophobic soils ［J］. The Science of the Total Environment, 2002, 296(13): 7787.

［14］Rajaram G, Erbach D C. Effect of wetting and drying on soil physical properties ［J］. Journal of Terramechanics, 1999, 36(1): 3949.

［15］杨洋. 公路处治土THMC耦合模型及路基变形数值模拟［D］. 武汉: 中国科学院武汉岩土力学研究所, 2008.

[1]	WANG Lei, CHEN Zhe, WANG Haowei. Effect of Heat Treatment on Microstructure and Mechanical Properties of In-Situ Al Matrix Composite for Storage Tanks [J]. Air & Space Defense, 2024, 7(6): 112-119.
[2]	ZUO Xinde, CHEN Yi, LI Yang, LUO Zhen, AO Sansan. Effect of Adding Tantalum on Microstructure and Properties of NiTi Shape Memory Alloy Manufactured by Wire Arc Additive Manufacturing [J]. Journal of Shanghai Jiao Tong University, 2024, 58(3): 382-390.
[3]	YUAN Lihua (袁丽华), LIANG Sen∗ (梁森), YAN Shengyu (闫盛宇). In-Plane Elastic Properties of Stitched Plain Weave Composite Laminate [J]. J Shanghai Jiaotong Univ Sci, 2023, 28(2): 220-232.
[4]	JIANG Zhao (姜朝), HUA Xueming* (华学明), HUANG Lijin (黄立进),WU Dongsheng (吴东升), LI Fang (李芳), CAI Yan (蔡艳). High Efficiency and Quality of Multi-Pass Tandem Gas Metal Arc Welding for Thick Al 5083 Alloy Plates [J]. Journal of Shanghai Jiao Tong University (Science), 2019, 24(2): 148-157.
[5]	YU Jianchao,LIN Youxi. Oxygen Free Copper Dynamic Mechanical Property in High Speed Machining Process [J]. Journal of Shanghai Jiao Tong University, 2018, 52(5): 587-592.
[6]	PENG Xuefeng1，HAN Jingtao1，LIU Jing1，YAN Peijie2. Effect of Induction Tempering on Mechanical Properties of#br# ColdFormed High Strength Steel Square Tube [J]. Journal of Shanghai Jiao Tong University, 2017, 51(4): 438-.
[7]	JIN Xue,ZHU Ping,LI Han,WANG Qing. Research on Mechanical Properties of Locking Cap Lap Welds and Partitioned Seam Weld Model [J]. Journal of Shanghai Jiao Tong University, 2017, 51(11): 1297-1303.
[8]	YAO Qi,LUO Zhen,LI Yang,DUAN Rui,HUANG Zunyue. Weld Forming and Mechanical Property of Stainless Steel Underwater Laser Welding [J]. Journal of Shanghai Jiaotong University, 2015, 49(03): 333-336.
[9]	HUANG Qian-wei (黄芊蔚), WANG Li-ping (王莉萍), WANG Jin-ye* (王瑾晔). Mechanical Properties of Artificial Materials for Bone Repair [J]. Journal of shanghai Jiaotong University (Science), 2014, 19(6): 675-680.
[10]	SHEN Limin1,GONG Jianming2,LIU Huansheng1,HUANG Yuxia. Effect of Coking on Thermal Diffusion and Mechanical Property of HP40Nb Tube [J]. Journal of Shanghai Jiaotong University, 2014, 48(08): 1159-1163.
[11]	YU Longa,LI Yaob,XIA Lijuana,DING Jinhonga,YANG Qia. Mechanical Property and Ultimate Bearing Capacity of Ship Airbags [J]. Journal of Shanghai Jiaotong University, 2014, 48(08): 1072-1077.
[12]	ZHENG Yu,LI Hongye,ZHUANG Xincun,ZHAO Zhen. A Review of Sheet Metal Shear Test Methods and Applications [J]. Journal of Shanghai Jiaotong University, 2014, 48(03): 422-426.
[13]	ZHANG Chao-feng1,2* (张超锋), ZHANG Zhi-sheng2 (张志胜), AOKI Tetsuhiko3 (青木徹彦), ZHANG Min4 (帐目). Research on the Dynamic Performance of Low-Yield-Strength Shear Panel Damper for Bridge Application [J]. Journal of shanghai Jiaotong University (Science), 2013, 18(1): 118-128.
[14]	Zuo X.-W.; Zhou S.; Chen N.-L.; Liao B.. Timed quenching process for large-scale AISI 4140 steel shaft [J]. J Shanghai Jiaotong Univ Sci, 2011, 16(2): 224-226.
[15]	Yu N.; Zhang W.-M.. Simulating mechanical behavior of porous materials by homogenization method [J]. J Shanghai Jiaotong Univ Sci, 2011, 16(2): 190-194.