Development and Application of Micro-gripper Integrating Tri-axial Force Sensor

Abstract

Abstract: A novel micro-gripper integrating tri-axial force sensor was introduced, and the clamping motion was realized through piezoelectric ceramic stack actuation and flexible-hinge enlargement. Its elastomeric body is two L structures. The L structure was optimized and simulated with suffering force. The strain gauge was sticked at L structure sensitive position to measure tri-axial force. The experiment verified the micro-gripper’s rationality and practicability.

Key words: tri-axial micro-force sensor, micro-gripper, piezoelectric actuator, finite element analysis

CLC Number:

TP 212.12

YU Qi-Kai-1, 2 , YOU You-Peng-1, HAN Jiang-Yi-3. Development and Application of Micro-gripper Integrating Tri-axial Force Sensor[J]. Journal of Shanghai Jiaotong University, 2012, 46(06): 972-976.

References

［1］Song G M , Yuan H Y, Tang Y， et al.A novel threeaxis force sensor for advanced training of shotput athletes［J］. Sensors and Actuators A, Physical，2006，128(1)： 6065.

［2］韩江义,游有鹏,王化明,等.一种带力传感的微夹持器设计及试验［J］. 机器人，2009，31(1)：6971.

HAN Jiangyi，YOU Youpeng，WANG Huaming，et al.Design and experimentation of a microgripper with force sensing［J］.Robot，2009,31(1)：6971.

［3］Kim G S. Development of a threeaxis gripper force sensor and the intelligent gripper using it［J］．Sensors and Actuators A, Physical， 2007，137(2)：213222.

［4］秦磊,李满天,孙立宁.基于MEMS技术的三维微力传感器［J］. 仪表技术与传感器,2007,26(6):13.

QIN Lei,LI Mantian,SUN Linin.Threedimensional micro force sensor based on MEMS technology［J］.

Instrument Technique and Senso，2007，26(6)：13.

［5］荣伟彬，王家畴，赵玉龙，等.基于MEMS技术的微操作三维力传感器研究［J］. 仪表技术与传感器,2007,28(4):692698.

RONG Weibin，WANG Jiachou，ZHAO Yulong，et al.Research on a triaxial force sensor based on MEMS technology for micromanipulation［J］.Chinese Journal of Scientific Instrument，2007，28(4)：692698.
［6］Kima G S, Shin H J, Yoon J W.Development of 6axis force/moment sensor for a humanoid robot’s intelligent foot［J］. Sensors and Actuators A, Physical，2008，141(2)：276281.

［7］Miyamoto K, Jomori T, Sugano K，et al.Mechanical calibration of MEMS springs with submicroNewton force resolution［J］. Sensors and Actuators A, Physical，2008，143(1)：136142.

［8］Kim G S.Design of a sixaxis wrist force/moment sensor using FEM and its fabrication for an intelligent robot［J］. Sensors and Actuators A, Physical，2007，133(1)： 2734.

［9］吴鹰飞,周兆英.柔性铰链设计计算［J］.工程力学,2002,19(6):136140.

WU Yingfei，ZHOU Zhaoying.Design of flexure hinges［J］.Engineering Mechanics, 2002,19(6):136140.

[1]	JIA Mizhi, XU Liming, LIN Nan, NAN Bohua, WANG Kun, CAI Deng’an, ZHOU Guangming. Structural Design and Mechanical Properties of Fissile Cover with Rebound and Reset Functions [J]. Air & Space Defense, 2022, 5(2): 8-16.
[2]	FENG Qiping (冯齐平), CHU Fengting (储沨婷), CHEN Rongjing (陈荣敬), PAN Xiaogang (潘晓岗). Effects of Mandibular Extractions with Clear Aligners: A Finite Element Analysis [J]. J Shanghai Jiaotong Univ Sci, 2021, 26(3): 377-382.
[3]	PAN Shengxuan (潘晟轩), ZOU Diyang (邹第洋), PAN Xiaogang(潘晓岗), TSAI Tsung-Yuan (蔡宗远). Effect of Attachment on Movement Control of the Central Incisor Using Invisible Orthodontics: In-Silico Finite Element Analysis [J]. J Shanghai Jiaotong Univ Sci, 2021, 26(3): 383-390.
[4]	ZHANG Cong, JIA Dejun, LI Fanchun, XU Yitong, ZHANG Yuan. Design and Simulation of a Titanium Alloy Lattice Bone Plate for 3D Printing [J]. Journal of Shanghai Jiao Tong University, 2021, 55(2): 170-178.
[5]	AN Qingsheng, SUN Lidong, WU Qiusheng. Design of Carbon Fiber Reinforced Composite Launch Tube [J]. Air & Space Defense, 2021, 4(2): 13-.
[6]	WANG Wei，WANG Min，HU Juncong，BAO Yidong，JIN Xia，CHEN Wenliang. Virtual Matching Method Based on Finite Element Simulation in Automotive Panel [J]. Journal of Shanghai Jiaotong University, 2020, 54(5): 532-543.
[7]	ZHAO Yong, JI Xiaojun, DAI Ming, QI Hongli, GAO Junkai. Analysis of Transmission Power and Efficiency of Side-Mounted Inductive Power Supply System for Metal Rotary Shafts [J]. Journal of Shanghai Jiao Tong University (Science), 2020, 25(3): 273-280.
[8]	ZHOU Min, GAO Mingze, LI Chuang, WANG Liancheng. Cargo Hold Structure Optimization of Small and Medium-Sized Duplex Stainless Steel Chemical Tankers [J]. Journal of Shanghai Jiao Tong University (Science), 2020, 25(3): 340-351.
[9]	WANG Dongwei,LIU Mingxing,WU Xiao,YANG Rui,DAI Jun’an. Transient Impact Dynamics of Electronic Cabinet [J]. Journal of Shanghai Jiaotong University, 2019, 53(Sup.1): 109-117.
[10]	MA Zhiqiang,LOU Yunfeng,LI Junjie,JIN Xianlong. Explicit Asynchronous Time Steps Parallel Computational Method for Structural Dynamics Based on Multiple Overlapping Nodes [J]. Journal of Shanghai Jiaotong University, 2019, 53(9): 1100-1106.
[11]	YI Canming，YU Haidong，WANG Hao. Dynamic Behavior of Coupled Flexible Plate Structure with Piezoelectric Actuator via Absolute Nodal Coordinate Formulation [J]. Journal of Shanghai Jiaotong University, 2019, 53(6): 665-672.
[12]	SHEN Jie,ZHANG Yansong. Finite Element Analysis of Weld Nugget Formation in Weld-Bonding of Three Stacks of Steel Sheets [J]. Journal of Shanghai Jiaotong University, 2019, 53(6): 726-733.
[13]	LI Yulin, AN Qingsheng, YANG Kunhao, TANG Xiaofeng, LIU Longtao. Analysis and Validation of Integrated Thermal Protection and Load Bearing for Composite Material Cable Cover [J]. Air & Space Defense, 2019, 2(3): 1-7.
[14]	ZHANG Liming,LI Yuanyuan,XUE Hongxiang,TANG Wenyong. The Analysis of Ultimate Strength of Stiffened Panels Exposed to Fire Under Temperature Increase Condition [J]. Journal of Shanghai Jiaotong University, 2019, 53(12): 1420-1427.
[15]	LI Dongwei, WANG Lei, ZHANG Cong, ZHAO Yixi. Analysis of the Effect of Pre-Hem Steel Stopping Position on Boundary Roll-in [J]. Journal of Shanghai Jiao Tong University, 2019, 53(1): 100-104.