Journal of Shanghai Jiao Tong University ›› 2016, Vol. 50 ›› Issue (01): 41-46.
Previous Articles Next Articles
LIANG Benliang
Received:
2014-12-22
Online:
2016-01-29
Published:
2016-01-29
CLC Number:
LIANG Benliang. Stress Model of ConcreteFilled Rectangular Fiber Reinforced Polymer Tubes Under Axial Compression[J]. Journal of Shanghai Jiao Tong University, 2016, 50(01): 41-46.
[1]FAM A Z, RIZKALLA S H. Confinement model for axially loaded concrete confined by circular fiberreinforced polymer tubes [J]. ACI Materials Journal, 2001, 98(4): 451461. [2]鲁国昌,叶列平,杨才千,等. FRP 管约束混凝土的轴压应力应变关系研究[J].工程力学,2006,23(9):98103. LU Guochang, YE Lieping, YANG Caiqian, et al. Research on stressstrain relating of concrete confined with FRP tubes [J].Engineering Mechanics, 2006,23(9):98103. [3]于峰,牛荻涛. 基于双剪统一强度理论的FRP 约束混凝土的承载力[J].哈尔滨工业大学学报,2009,41(12):186189. YU Feng, NIU Ditao. Bearing capacity of FRPconfined concrete based on twin shear unified strength theory[J].Journal of Harbin Institute of Technology, 2009,41(12):186189. [4]SAAFI M, TOUTANJI H A, LI Z. Behavior of concrete columns confined with fiber reinforced polymer tubes [J]. ACI Materials Journal, 1999, 96(4): 500509. [5]OZBAKKALOHLU T, OEHLERS D J.Concretefilled square and rectangular FRP tubes under axial compression [J]. Journal of Composites for Construction, 2014, 12(4):469477. [6]OZBAKKALOHLU T. Axial compressive behavior of square and rectangular highstrength concretefilled FRP tubes [J]. Journal of Composites for Construction, 2014, 17(1):151161. [7]OZBAKKALOHLU T. Compressive behavior of concretefilled FRP tubes columns: Assement of critical column parameters [J]. Engineering Structures, 2013, 51:188199. [8]梁本亮, 刘建新. 圆钢管混凝土短柱轴压极限承载力分析[J]. 上海交通大学学报, 2010,44(6): 749754. LIANG Benliang, LIU Jianxin. Ultimate bearing capacity of concrete filled circular steel tubular short columns under axial compression [J]. Journal of shanghai Jiaotong University, 2010, 44(6): 749754. [9]PEDRAM Sadeghian, AMIR Fam. A rational approach towards strain efficiency factor of fiberreinforced polymerwrapped concrete columns [J].ACI Structural Journal, 2014, 111(1):135144. [10]MOHANMED H M, MASMOUDI R.Axial load capacity of concretefilled FRP tube columns: Experimental versus theoretical predictions [J]. American Society of Civil Engineers, 2013, 14 (2):231243. [11]DANIEL I M,SHAI O.Engineering mechanics of composites materials[M].New York:Oxford University Press,1994:432. [12]CHEN J F, LI S Q, BISBY L A. Factors affecting the ultimate condition of FRPwrapped concrete columns [J].Journal of Composites for Construction, 2013, 17(1):6778. [13]ACI 440.2R082008, Guide for the design and conctruction of externally bonded FRP systems for strengthening concrete structures[S]. [14]CAN/CSAS6062006, Canadian Highway Bridge design code[S]. [15]CSAS806022002, Design and Construction of buildings components with fibrereinforced polymers[S]. |
[1] | DENG Hefang (邓贺方), XIA Kailong (夏凯龙), TENG Jinfang (滕金芳), QIANG Xiaoqing (羌晓青), ZHU Mingmin∗ (朱铭敏), LU Shaopeng (卢少鹏). Performance Effect of Trench Casing on a Transonic Compressor at Different Rotating Speeds [J]. J Shanghai Jiaotong Univ Sci, 2024, 29(6): 1151-1160. |
[2] | LIU Dalin, TAO Tao, CAO Yong, ZHOU Dai, HAN Zhaolong. Refined Simulation of Near-Surface Wind Field of Atmospheric Boundary Layer Based on WRF-LES Model [J]. Journal of Shanghai Jiao Tong University, 2024, 58(2): 220-231. |
[3] | ZHUANG Haowan, TENG Jinfang, ZHU Mingmin, QIANG Xiaoqing. Impacts of Blades Considering Manufacturing Tolerances on Aerodynamic Performance of Compressor [J]. Journal of Shanghai Jiaotong University, 2020, 54(9): 935-942. |
[4] | WU Yadong, LI Tao, ZHANG Yongjie. Experimental and Numerical Study of Compressor Tip Leakage Flow Based on Arc-Curve Skewed Slot Casing Treatment [J]. Journal of Shanghai Jiaotong University, 2020, 54(7): 745-755. |
[5] | LIU Xiaoyuan,XUE Hongxiang,TANG Wenyong. Lateral Failure Analysis of Unbonded Flexible Risers Under Axial Compression Force [J]. Journal of Shanghai Jiao Tong University, 2018, 52(9): 1017-1022. |
[6] |
ZHANG Yang1,2,CHEN Bing1,ZHAO Shexu1,LI Siping1.
Numerical Simulation of Axially Loaded Circular Steel Tubular Stub Columns with Fly Ash Concrete Infill [J]. Journal of Shanghai Jiao Tong University, 2017, 51(7): 769-773. |
[7] | HU Xiang-dong1,2* (胡向东), WANG Jin-tai1,2 (王金泰), YU Rui-zhi3 (余睿智). Uniaxial Compressive and Splitting Tensile Tests of Artificially Frozen Soils in Tunnel Construction of Hong Kong [J]. Journal of shanghai Jiaotong University (Science), 2013, 18(6): 688-692. |
[8] | LI Jiangchuan1,CHEN Jun1,CHEN Jieshi1,XIA Cedric2,ZENG Danielle2. Flow Stress Curve Modeling of Bake-Hardening A6111 Aluminum Alloy [J]. Journal of Shanghai Jiaotong University, 2013, 47(11): 1680-1684. |
[9] | ZHOU Xiaofeng1,ZHANG Mengxi1,QIU Chengchun1,ZHU Hong2,WANG Jin2. Strength of Sand Reinforced with Different Forms of Geogrid [J]. Journal of Shanghai Jiaotong University, 2013, 47(09): 1377-1381. |
[10] | CHENG Bin, ZHAO Jin-Cheng, XIAO Ru-Cheng. EqualStability Level Based Optimal Stiffener Design for Moderately Thick Plates [J]. Journal of Shanghai Jiaotong University, 2011, 45(04): 528-533. |
[11] | LIANG Benliang,LIU Jianxin. Ultimate Bearing Capacity of ConcreteFilled Circular Steel Tubular Short Columns under Axial Compression [J]. Journal of Shanghai Jiaotong University, 2010, 44(06): 749-0754. |
Viewed | ||||||
Full text |
|
|||||
Abstract |
|
|||||