Journal of Shanghai Jiaotong University ›› 2011, Vol. 45 ›› Issue (09): 1395-1399.
• Hydraulic Engineering • Previous Articles Next Articles
XIE Long-1, JIN Si-Yu-1, 2 , YU Jian-Guo-1, WANG Yu-Zhang-1
Received:
2011-03-02
Online:
2011-09-30
Published:
2011-09-30
CLC Number:
XIE Long-1, JIN Si-Yu-1, 2 , YU Jian-Guo-1, WANG Yu-Zhang-1. PIV Analysis of Inner Flow Field in 90° Bending Duct of Circular-Section with Fore-End Valve[J]. Journal of Shanghai Jiaotong University, 2011, 45(09): 1395-1399.
[1]江山,张京伟,吴崇健,等. 基于FLUENT的90°圆形弯管内部流场分析[J]. 中国舰船研究,2008,3(1): 3741. JIANG Shan, ZHANG Jingwei, WU Chongjian, et al. Numerical simulation of inner flow in 90° bending duct of crcularsection based on FLUENT[J]. Chinese Journal of Ship Research, 2008, 3(1): 3741. [2]丁珏,翁培奋. 90°弯管内流动的理论模型及流动特性的数值研究[J]. 计算力学学报,2004,21(3):314321. DING Jue, WENG Peifen. Numerical simulation of theoretical models and flow characteristics in 90° bending duct[J]. Chinese Journal of Computational Mechanics, 2004, 21(3): 314321. [3]樊洪明,何钟怡,王小华. 弯曲管段内流动的大涡模拟[J].水动力学研究与进展,2001,16(1):7883. FAN Hongming, HE Zhongyi, WANG Xiaohua. Large eddy simulation of a curved duct flow[J]. Journal of Hydrodynamics, 2001, 16(1): 7883. [4]Sudo K, Sumida M, Hibara H. Experimental investigation on turbulent flow in a circularsectioned 90degree bend[J]. Experiments in Fluids, 1998, 25(1): 4249. [5]Taylor A M K P, Whitelaw J H, Yianneskis M. Curved ducts with strong secondary motion: Velocity measurements of developing laminar and turbulent flow[J]. Journal of Fluids Engineering, 1982, 104(3): 350360. [6]尚虹,王尚锦,席光,等. 90°圆截面弯管内三维紊流场试验研究[J]. 航空动力学报,1994,9(3):263266. SHANG Hong, WANG Shangjin, XI Guang, et al. Experimental study of 3D turbulent flow field in a 90° bend pipe[J]. Journal of Aerospace Power, 1994, 9(3): 263266. [7]万津津,施鎏鎏,刘应征,等. 贴壁方柱湍流场高分辨率PIV试验研究[J]. 上海交通大学学报,2009,43(2):322324. WAN Jinjin, SHI Liuliu, LIU Yingzheng, et al. Highresolution PIV measurement of the wake behind a square cylinder flushmounted on the wall[J]. Journal of Shanghai Jiaotong University, 2009, 43(2): 322324. |
[1] | WANG Zhiwei, HE Yanping, LI Mingzhi, QIU Ming, HUANG Chao, LIU Yadong. Numerical Simulation and Flow Pattern Evolution of Gas-Liquid Two-Phase Flow Passing Through a 90° Pipe Bend Based on CFD [J]. Journal of Shanghai Jiao Tong University, 2022, 56(9): 1159-1167. |
[2] | LIU Qingsheng, XUE Hongxiang, YUAN Yuchao, TANG Wenyong. Bending Properties of Unbonded Flexible Risers with Composite Materials [J]. Journal of Shanghai Jiao Tong University, 2022, 56(9): 1247-1255. |
[3] | LI Peng, WANG Chao, SUN Huawei, GUO Chunyu. Numerical Simulation Strategy Optimization Analysis of Submarine Resistance and Flow Field [J]. Journal of Shanghai Jiao Tong University, 2022, 56(4): 506-515. |
[4] | HU Jinshuo, HUANG Jianzhe. Dynamics Modeling and Validation of Coaxial Lifting Rotors [J]. Journal of Shanghai Jiao Tong University, 2022, 56(3): 395-402. |
[5] | RONG Zhen, HU Wenjie, QIU Yunlong, ZHANG Yujian, WANG Yizhuang, JIANG Zhongzheng, CHEN Weifang. Φ120 Hypersonic Wind Tunnel Flow Field Calibration [J]. Air & Space Defense, 2022, 5(3): 58-64. |
[6] | HUANG Jiayang (黄嘉阳), YANG Pengfei* (杨鹏飞), WAN Bo (万波), ZHANG Zhiqiang (张志强). KDLPCCA-Based Projection for Feature Extraction in SSVEP-Based Brain-Computer Interfaces [J]. J Shanghai Jiaotong Univ Sci, 2022, 27(2): 168-175. |
[7] | WU Tao, MO Shixu, XIANG Yongbin, ZOU Zequn, ZHENG Yan. Explicit Buckling Analysis of Rotationally Restrained Plates on Rigid Base Under Various Loading Conditions [J]. Journal of Shanghai Jiao Tong University, 2022, 56(1): 114-126. |
[8] | ZHENG Gaoyuan, ZHAO Yixi, CUI Junhui. Formation Law of Surface Defects in Stretch-Bending Formamtion of Aluminum Trim Strip for Automobile Body [J]. Journal of Shanghai Jiao Tong University, 2022, 56(1): 53-61. |
[9] | LIU Hao , ZHANGNing , WANG Huoping , ZHU Liyun , ZHANG Yu . A Method for Improving the Motion Performance of Steel Catenary Riser by Adding Inertia Bodies to the Sagbend Section #br# [J]. Ocean Engineering Equipment and Technology, 2022, 9(1): 37-45. |
[10] | XU Dehui, GU Hanyang, LIU Li, HUANG Chao. Thermal Experimental and Numerical Study on Performance of a Novel Conical Swirl-Vane Steam Separator [J]. Journal of Shanghai Jiao Tong University, 2021, 55(9): 1087-1094. |
[11] | JIANG Chenqi (江晨琦), GONG Zhaoxin (宫兆新) . Effect of Deflectors on the Flow Characteristics of a Square Pipe with a 90° Bend [J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 163-169. |
[12] | WANG Yufeng,WANG Dandong,HU Jichao,CHEN Liang,CHEN Jiangping. A Numerical Model of the Two-Phase CO2 Ejectors [J]. Journal of Shanghai Jiaotong University, 2019, 53(7): 860-865. |
[13] | ZHANG Xiaohui (张晓慧), GU Xiechong (顾解忡), MA Ning (马宁), WANG Yifan (王一凡), WU Zeren (吴泽仁). Experimental Investigation into the Effect of Roll Amplitude on Roll Damping [J]. Journal of Shanghai Jiao Tong University (Science), 2019, 24(6): 732-738. |
[14] | XU Hongchang (徐宏昌), LIU Shuangzhai (刘双寨), PAN Haoxing (潘浩星). Spray Characteristics with High-Speed Tomographic Particle Image Velocimetry Under Non-Flash and Flash Boiling Conditions [J]. Journal of Shanghai Jiao Tong University (Science), 2019, 24(5): 591-596. |
[15] | HUANG Tao (皇涛), WANG Kun (王锟), ZHAN Mei (詹梅), GUO Junqing (郭俊卿), CHEN Xuewen (陈学文), CHEN Fuxiao (陈拂晓), SONG Kexing (宋克兴). Wall Thinning Characteristics of Ti-3Al-2.5V Tube in Numerical Control Bending Process [J]. Journal of Shanghai Jiao Tong University (Science), 2019, 24(5): 647-653. |
Viewed | ||||||||||||||||||||||||||||||||||||||||||||||||||
Full text 525
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||
Abstract 4243
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||