Hydraulic Shock Absorber Orifice Cavitation and Noise Analysis

doi:10.16183/j.cnki.jsjtu.2018.03.007

Abstract

Abstract: Based on road and bench test, abnormal noise mechanism and reduction measures in twin-tube hydraulic absorber were studied, and fluid dynamic models of the damper orifices, disc valves and spring valves were established by using AMESim software and validated by the test results. Through the numerical simulation and damping parameters impact analysis, the state of the orifice cavitation appears in the compression and rebound stroke was determined, and relationship between orifice cavitation, abnormal vibration of the rod and the orifice, inflation pressure were found. In order to reduce the abnormal vibration noise of the damper, further improvements in abnormal noise clearing were proposed on the premise of guaranteeing the external characteristics of the damper.

Key words: twin-tube hydraulic absorber； cavitation； vibration induced noise

CLC Number:

U 463
TH 113

AN Songgwang,CAO Yang,ZHANG Jianwu. Hydraulic Shock Absorber Orifice Cavitation and Noise Analysis[J]. Journal of Shanghai Jiao Tong University, 2018, 52(3): 297-304.

References

［1］周长城. 汽车液压筒式减振器设计及理论［M］. 北京:北京大学出版社, 2012. ［2］幺鸣涛, 管继富, 顾亮, 等. 车辆双筒式减振器异响研究［J］. 机械设计与制造, 2011 (2): 114-116. YAO Mingtao, GUAN Jifu, GU Liang, et al. Study on abnormal noise of vehicular twin-tube shock absorber［J］. Machinery Design & Manufacture, 2011 (2): 114-116. ［3］俞大卫, 罗金良. 汽车筒式减振器异响成因分析［J］. 兵工学报(坦克装甲车与发动机分册), 2000(1): 19-26. YU Dawei, LUO Jinliang. An analysis on the cause of abnormal sound of automobile shock absorber［J］. Acta Armamentari (The Volume of Tank Armored Vehicle and Engine), 2000(1): 19-26. ［4］SHU H, LUO S, WANG L. Test method, simulation and micro-process dynamic model for noise analysis of auto hydraulic shock absorber［R］. Pennsylvania, USA: SAE Technical Paper, 2015. ［5］柳文健, 丁渭平, 杨明亮, 等. 基于 AMESim 的液压减振器异响分析与改进研究［J］. 液压与气动, 2014 (3): 109-112. LIU Wenjian, DING Weiping, YANG Mingliang, et al. Analysis of abnormal noise and improvement for hydraulic damper based on AMESim［J］. Chinese Hydraulics & Pneumatics, 2014(3): 109-112. ［6］周长城, 李迪. 减振器液压气穴机理分析与研究［J］. 起重运输机械, 2008 (1): 53-56. ZHOU Changcheng, LI Di. Analysis and research on hydraulic cavitation mechanism of shock absorber［J］. Hoisting and Conveying Machinery, 2008 (1): 53-56. ［7］雷天觉, 新编液压工程手册［M］.北京: 北京理工大学出版社, 1998. ［8］KOIVULA T. On cavitation in fluid power［C］∥Proc of 1st FPNI-PhD Symp. Hamburg: FPNI PhD Symp, 2000: 371-382. ［9］KOIVULA T S, ELLMAN A U. Cavitation behavi-our of hydraulic orifices and valves［R］. Pennsylvania, USA: SAE Technical Paper, 1998. ［10］罗天洪, 金锐超, 江礁, 等. 液压减振器液压模型与气穴异响研究［J］. 重庆交通大学学报 (自然科学版), 2014, 33(1): 153-156. LUO Tianhong, JIN Ruichao, JIANG Jiao, et al. Hydraulic model and cavitations of hydraulic buffer［J］.Journal of Chongqing Jiaotong University (Natural Sciences), 2014, 33(1): 153-156. ［11］BENAZIZ M, NACIVET S, THOUVEREZ F. A shock absorber model for structure-borne noise analyses［J］. Journal of Sound and Vibration, 2015, 349: 177-194. ［12］WATTON J. Fundamentals of fluid power control ［M］. Cambridge: Cambridge University Press, 2009.

[1]	QIAN Peng, WANG Guoliang, ZHU Wenfeng. Modeling and Optimization of 3D Assembly Tolerance for Window Lifting Under Flexible Deformation [J]. Journal of Shanghai Jiaotong University, 2020, 54(11): 1134-1141.
[2]	CHENG Xiaoxuan,CHEN Li. Task Scheduling Period Selection Based on Stability Analysis of Automatic Clutches [J]. Journal of Shanghai Jiaotong University, 2019, 53(4): 438-446.
[3]	GONG Xiaoxiang, CHANG Siqin, JIANG Lichen, LI Xiaopan. A Novel BrakebyWire Unit and Control System for Electric Vehicle [J]. Journal of Shanghai Jiao Tong University, 2016, 50(03): 395-400.
[4]	LIU ShiLin1，MA Na1,2，ZHAO Siyu1. Problems and Development Mechanism of Smart City Delivery from Standardization Perspective [J]. Journal of Shanghai Jiaotong University, 2015, 49(08): 1231-1236.
[5]	LIU Peng1,ZHU Jianxin1,CHU Aihua2,ZHOU Xingye2. Power Battery Thermal Faults Diagnostic System Based on Thermal Model [J]. Journal of Shanghai Jiaotong University, 2015, 49(04): 487-493.
[6]	WANG Na1,PENG Xiongqi1,ZHANG Yuan2,PAN Feng2,LU Hongsheng2. Airbag Simulation and Application Based on Corpuscular Particle Method [J]. Journal of Shanghai Jiaotong University, 2014, 48(08): 1078-1083.
[7]	YU Shaoqiu1,TANG Hua2. Coupling Analysis of FEM/DEM for Whole Failure Process of Rock Slope and Its Engineering Application [J]. Journal of Shanghai Jiaotong University, 2013, 47(10): 1611-1615.
[8]	ZHANG Siliang1,ZHU Ping1,CHEN Wei1,2. Robust Design Method Considering Two Sources of Uncertainties and Its Application in Autobody Lightweight Design [J]. Journal of Shanghai Jiaotong University, 2013, 47(05): 834-839.
[9]	XU Chuan,WU Hao,WANG Hua,GAO Xiang. Matching Optimization Analysis of Complex Structure with Multiple Error Sources Based on Gaussian Mapping [J]. Journal of Shanghai Jiaotong University, 2013, 47(05): 840-845.
[10]	LI Gang-1, 2 , ZONG Chang-Fu-1, ZHANG Ze-Xing-1, DUAN Ming-Xu-1, LIANG He-Qi-3, HONG Wei-1. Study on Vehicle Chassis Integrated Control [J]. Journal of Shanghai Jiaotong University, 2012, 46(08): 1291-1296.
[11]	JI Qinghui,ZHU Ping,LU Jiahai,LIU Zhao. Carbon Fiber Reinforced Plastic Fatigue Performance Prediction and#br# Application Based on Kriging Surrogate Model [J]. Journal of Shanghai Jiao Tong University, 2017, 51(2): 129-.
[12]	DU Xianbin,ZHAO Youqun,XIAO Zhen,LIN Fen. Investigation on the Camber and Cornering Characteristics of a Catenary Non-Pneumatic Wheel with Brush Model [J]. Journal of Shanghai Jiao Tong University, 2018, 52(3): 305-311.
[13]	MO Jiliang,WANG Dongwei,LI Jianxi,LI Zhen,ZHU Minhao,ZHOU Zhongrong. Effect of Friction Heat on Interfacial Wear and Brake System Stability [J]. Journal of Shanghai Jiao Tong University, 2018, 52(5): 624-630.
[14]	CHAI Benben1,WU Shaofang1,ZHANG Jianwu1,LIN Lianhua2,XU Haigang2. Optimal Control Strategy of Two Speed Automatic Mechanical Transmission in Shift Process [J]. Journal of Shanghai Jiao Tong University, 2018, 52(6): 658-665.
[15]	YIN Ji，ZHU Ping，ZHANG Siliang. Simulation and Experimental Study of Steel Wheel Impact Test Considering Strain Rate Effect [J]. Journal of Shanghai Jiaotong University, 2013, 47(06): 967-971.