Approach of Design of Process Dimension for
 Hemming of Aluminum Alloys

doi:10.16183/j.cnki.jsjtu.2018.02.009

Abstract

Abstract: Through simulation experiments on hemming qualities for curved surface hemming and curved edge hemming under different flanging sheet sizes, limit values of flanging sheet size are decided for different curvature radius. The values of corresponding flanging length and hemming width are given then. A hemming feature panel is designed based on the standards. The experiment results demonstrate that, the values of designed parameters are reasonable and the feature panel obtains favourable hemming effect.

Key words: aluminum alloys, hemming, flanging, process dimension, design standard

CLC Number:

TH 162

YANG Ke1,ZHAO Yixi1,FENG Changwen2,YU Zhihua2. Approach of Design of Process Dimension for Hemming of Aluminum Alloys[J]. Journal of Shanghai Jiaotong University, 2018, 52(2): 182-187.

[1]	LI Jianjun, ZHU Wenfeng, SUN Haitao, LI Yuanhui, WANG Shunchao. Method of Curing Deformation Prediction and Surface Reconstruction Compensation for Roller-Hemming Structures with Dissimilar Materials [J]. Journal of Shanghai Jiao Tong University, 2022, 56(7): 965-976.
[2]	LI Yuanhui, LI Jianjun, WANG Shunchao, ZHANG Longyao, ZHU Wenfeng. Modeling and Experiment on Roll-Hemming Forming Process of Aluminum Alloy Sheet with Adhesive [J]. Journal of Shanghai Jiao Tong University, 2022, 56(4): 532-542.
[3]	TANG Genglin, LI Jianjun, LI Yuanhui, ZHANG Longyao, ZHU Wenfeng. Numerical Simulation and Experimental Research of Sheet Hemming Forming Based on Adhesive Filling [J]. Journal of Shanghai Jiao Tong University, 2022, 56(4): 523-531.
[4]	YOU Shuman, LI Jie, ZHAO Yixi, HU Yihui. Process Parameters of Flexible Flanging [J]. Journal of Shanghai Jiao Tong University, 2021, 55(10): 1246-1254.
[5]	ZHAN Yang,ZHAO Yixi,ZHU Baohang. The Solution of Uneven Fillet Radius Defect in the Flanging Process of Window Trim Strip [J]. Journal of Shanghai Jiaotong University, 2019, 53(4): 488-496.
[6]	LI Dongwei, WANG Lei, ZHANG Cong, ZHAO Yixi. Analysis of the Effect of Pre-Hem Steel Stopping Position on Boundary Roll-in [J]. Journal of Shanghai Jiao Tong University, 2019, 53(1): 100-104.
[7]	WANG Bin, LI Hong-tao, TANG Guang-yin. Overview of Offshore Floating Wind Turbines [J]. Ocean Engineering Equipment and Technology, 2018, 5(增刊): 220-225.
[8]	ZHOU Jie1,DAI Hong1,CHEN Yongfeng1,LU Junjiang2,YAO Xiaobing2. Multi-objective Optimization of Parameters for Forming Process of Drawing and Hole-Flanging Workpiece [J]. Journal of Shanghai Jiaotong University, 2014, 48(03): 412-416.
[9]	BAI Yanchao,CHEN Jieshi,CHEN Jun . Optimum Design of Complex Flanging Trimming Line Based on Error Correction Method [J]. Journal of Shanghai Jiaotong University, 2010, 44(09): 1201-1205.

Approach of Design of Process Dimension for Hemming of Aluminum Alloys

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 9

Recommended Articles

Metrics

Comments