Experimental Study of LType Podded Propulsors in
 Straight Forward Motion and Azimuthing Conditions

doi:10.16183/j.cnki.jsjtu.2017.07.007

Abstract

Abstract: In this study, an openwater measuring instrument was developed for Ltype podded propulsors and a series of experimental tests were conducted to evaluate hydrodynamic performances of the podded propulsor. Performance of propeller thrust, torque and overall thrust of the podded propulsor unit was measured in the experiment under the conditions of straight forward motion with the advance coefficient between 0 and 1.3. And a comparison of propeller and the podded unit performance under dynamic azimuthing conditions with an azimuthing of 0.1396 rad/s and static azimuthing conditions was made at three different advance coefficients of Ltype podded propulsors. The experimental results demonstrated that comparing with the static azimuthing conditions, propeller thrust in dynamic azimuthing conditions was larger but torque was smaller when the Ltype podded propulsor with righthanded rotation propeller turns right. The regularity of the variable force on the pod is very complex.

Key words: Ltype podded propulsor; model test; dynamic azimuthing; hydrodynamic; propeller

CLC Number:

U 661.33

ZHAO Dagang1,GUO Chunyu1,SU Yumin1 DOU Pengfei2,JING Tao1,ZHANG Haipeng1. Experimental Study of LType Podded Propulsors in
Straight Forward Motion and Azimuthing Conditions[J]. Journal of Shanghai Jiao Tong University, 2017, 51(7): 812-818.

References

［1］沈兴荣, 蔡跃进, 蔡荣泉, 等. 吊舱式推进器水动力性能研究综述［J］. 船舶力学, 2011, 15(1): 189197.
SHEN Xingrong, CAI Yuejin, CAI Rongquan, et al. Summarization of hydrodynamics performance study of podded propulsor［J］. Journal of Ship Mechanics, 2011, 15(1): 189197.
［2］PALM M, JRGENS D, BENDL D. Numerical and experimental study on ventilation for azimuth thrusters and cycloidal propellers［C］∥Proceedings of the Second International Symposium on Marine Propulsors. SMP’11 Hamburg, Germany: Hamburg University of Technology, 2011: 491498.
［3］ISLAM M, RYAN R, MOLYNUEX D. Numerical and experimental research on a podded propulsor ［C］∥Proceedings of the ASME 2014 33rd International Conference on Ocean, Offshore and Arctic Engineering. San Francisco, California, USA: OMAE, 2014: 110.
［4］ISLAM M, VEITCH B, LIU P. Uncertainty of measurements of podded propulsor performance characteristics［J］. Ocean Engineering, 2014, 81(2): 130138.
［5］曹梅亮, 王根禄, 朱鸣. 吊舱式推进装置水动力性能试验研究［J］. 上海交通大学学报, 2003, 37(8): 11981200.
CAO Meiliang, WANG Genlu, ZHU Ming. Experimental investigations on the hydrodynamic performance of podded propulsors ［J］. Journal of Shanghai Jiao Tong University, 2003, 37(8): 11981200.
［6］熊鹰, 盛立, 杨勇. 吊舱式推进器偏转工况下水动力性能［J］. 上海交通大学学报, 2013, 47(6): 956961.
XIONG Ying, SHENG Li, YANG Yong. Hydrodynamics performance of podded propulsion at declination angles［J］. Journal of Shanghai Jiao Tong University, 2013, 47(6): 956961.
［7］贺伟, 陈克强, 李子如. 串列式吊舱推进器操舵工况水动力试验研究［J］. 华中科技大学学报(自然科学版), 2015(1): 107111.
HE Wei, CHEN Keqiang, LI Ziru. Experimental research on propulsor in hydrodynamics of tandem podded azimuthing conditions［J］. Journal of Huazhong University of Science and Technology (Nature Science Edition), 2015(1): 107111.
［8］杨晨俊, 钱正芳, 马骋. 吊舱对螺旋桨水动力性能的影响［J］. 上海交通大学学报, 2003, 37(8): 12291233.
YANG Chenjun, QIAN Zhengfang, MA Cheng. Influences of pod on the propeller performance［J］. Journal of Shanghai Jiao Tong University, 2003, 37(8): 12291233.
［9］SHAMSI R, GHASSEMI H. Numerical investigation of yaw angle effects on propulsive characteristics of podded propulsors［J］. International Journal of Naval Architecture & Ocean Engineering, 2014, 5(2): 287301.
［10］SHAMSI R, GHASSEMI H. Timeaccurate analysis of the viscous flow around puller podded drive using sliding mesh method［J］. Journal of Fluids Engineering, 2015, 137(1): 19.
［11］SHAMSI R, GHASSEMI H. Hydrodynamic analysis of puller and pusher of azimuthing podded drive at various yaw angles［J］∥Journal of Engineering for the Maritime Environment, 2014, 228(1):5569.
［12］郭春雨, 孙瑜, 赵大刚, 等. 变安装角推力鳍对吊舱推进器敞水性能的影响［J］. 华中科技大学学报(自然科学版), 2013, 41(12): 106111.
GUO Chunyu, SUN Yu, ZHAO Dagang, et al. Influence of thrust fins with different installation angles on open water performance of podded propulsor［J］. Journal of Huazhong University of Science and Technology (Nature Science Edition), 2013, 41(12): 106111.
［13］董小倩, 杨晨俊. 吊舱推进器桨毂间隙影响的数值分析［J］. 上海交通大学学报, 2013, 47(6): 938942.
DONG Xiaoqian, YANG Chenjun. CFD study of hub gap effect on podded propulsor performance［J］. Journal of Shanghai Jiao Tong University, 2013, 47(6): 938942.

[1]	ZHAO Ziren1, DU Shichang1, HUANG Delin1, REN Fei2, LIANG Xinguang2. Modelling and Bottleneck Analysis of Product Quality in Transient Phase#br# of MultiStage Manufacturing Systems Based on Markovian Chains [J]. Journal of Shanghai Jiao Tong University, 2017, 51(10): 1166-1173.
[2]	ZHOU Penghui, MA Hongzhan, CHEN Dongping, CHEN Mengyue, CHU Xuening. Identification of Product Redesign Modules Based on#br# Fuzzy Random Failure Mode and Effects Analysis [J]. Journal of Shanghai Jiao Tong University, 2017, 51(10): 1189-1195.
[3]	LI Changxi1, 2, ZHOU Yan1, LIN Han3, LI Lingzhi1, GUO Ge1. TemporalSpatial Sequential Fusion Recognition Method of#br# Ballistic Missile Target Based on MIMOFNN Model [J]. Journal of Shanghai Jiao Tong University, 2017, 51(9): 1138-.
[4]	FENG Mingyue, HE Minghao, HAN Jun, YU Chunlai. High Resolution Direction of Arrival Estimation Based on#br# Covariance Fitting Estimation of Signal Parameters by#br# Rotational Invariance Technique Algorithm [J]. Journal of Shanghai Jiao Tong University, 2017, 51(9): 1145-.
[5]	?YANG Ping1,SHENG Jie1,WANG Yucheng2,LI Zhuyong1,JIN Zhijian1,HONG Zhiyong1. Quench Propagation Characteristics Influenced by NonUniform Properties of YBa2Cu3O7δ High Temperature Superconducting Tape [J]. Journal of Shanghai Jiaotong University, 2017, 51(9): 1090-1096.
[6]	WANG Xing, ZHOU Yipeng, TIAN Yuanrong, CHEN You, ZHOU Dongqing, HE Jiyuan. Sparse Decomposition for Frequency Modulation Radar Signal Based on#br# Advanced Genetic Algorithm and SinChirplet Atom [J]. Journal of Shanghai Jiao Tong University, 2017, 51(9): 1124-1130.
[7]	ZHANG Liangjun1, 2, LI Xiaoci1, WU Jingyi1, CAI Aifeng1. ThermalStructure Coupling Analysis of #br# Microgravity Environment Simulation Suspension Structure for #br# Large Space Deployable Mechanisms [J]. Journal of Shanghai Jiao Tong University, 2017, 51(8): 954-961.
[8]	XIA Hailiang1, 2, LIU Yakun1, 2, LIU Quanzhen3, LIU Baoquan3, FU Zhengcai1, 2. Metal Ablation Affected by Electrode Shapes Under#br# Long Continuing Lightning Current [J]. Journal of Shanghai Jiao Tong University, 2017, 51(8): 903-908.
[9]	GU Jiayang, XIE Yulin, TAO Yanwu, HUANG Xianghong, WU Jie. Numerical Simulation and Experimental Study on VortexInduced#br# Motion of a New Type of Floating Drilling Production Storage Offloading [J]. Journal of Shanghai Jiao Tong University, 2017, 51(7): 878-885.
[10]	LIN Da, ZHU Yijia, WEI Xiaodong, WANG Zhiyu, ZHANG Wugao. Combustion and Particle Emission Characteristics Affected by#br# Fuel Supply Parameters for a Diesel Engine Fuelled with#br# Polyoxymethylene Dimethyl Ethers/Diesel [J]. Journal of Shanghai Jiao Tong University, 2017, 51(7): 787-795.
[11]	MENG Qingyang1, YAN Weiwu1, HU Yong1, CHENG Jianlin1, CHEN Shihe2, ZHANG Xi2. Model Identification Based on Subspace Model Identification of#br# Superheated Steam System in UltraSupercritical CoalFired Power Unit [J]. Journal of Shanghai Jiao Tong University, 2017, 51(6): 672-678.
[12]	JIANG Huajuna, CAI Yana, b, LI Chaohaoa, LI Fanga, b, HUA Xueminga, b. Recognition Method for Gas Pores on XRay Image of Lap Joints#br# Based on the Improved Sobel Algorithm [J]. Journal of Shanghai Jiao Tong University, 2017, 51(6): 665-671.
[13]	DONG Guanhua,YIN Qin,YIN Guofu,XIANG Zhaowei. Identification and Modeling of Coupling Dynamic Stiffness in Joints of Machine Tool [J]. Journal of Shanghai Jiaotong University, 2015, 49(09): 1263-1434.
[14]	XIE Qijiang,YU Haidong. Coupling Relationship Between Loads on Cutterhead of Tunnel Boring Machine and Contact Stiffness of Gripper Shoes and Rocks [J]. Journal of Shanghai Jiaotong University, 2015, 49(09): 1269-1275.
[15]	ZHONG Jianlin1,MA Dawei1,REN Jie1,LI Shijun2,WANG Xu3. Static Compression Analysis of Rubber Hollow Cylinder Based on Plane Strain Assumption [J]. Journal of Shanghai Jiaotong University, 2015, 49(09): 1276-1280.