Type Synthesis of FullyIsotropic and Decoupled 3T1R Parallel Mechanism

Abstract

Abstract: Abstract： In order to obtain fullyisotropic and decoupled structures of the parallel robot, a very simple yet very effective structural design was proposed based on GF set. First, the basic concept of GF set, algorithms and the type synthesis principle, requirements for rotation based on GF set were introduced. Next, the selection criterion of the input pair and type synthesis principle of decoupled branches were given, which ensured that the input of various branches were isotropic and the decoupled. According to the type synthesis theory, the specific process for structural synthesis of 3T1R four degrees of freedom fullyisotropic and decoupled parallel mechanism were accomplished. Simultaneously, a lot of new mechanisms were obtained. Finally, the screw theory was applied to analyze the kinematic characteristic of the parallel mechanism synthesized above. The expression of the Jacobian matrix was deduced which validated the fullyisotropic of the mechanism and demonstrated the effectiveness of the novel method of structural synthesis for parallel mechanisms.

Key words: Key words： parallel mechanism, structural synthesis, GF set, fullyisotropic, decoupled

CLC Number:

TH 112

CAO Yi1,2a,2b,3,QIN Youlei1,3,CHEN Hai1,3,LIU Kai1,3,ZHOU Hui1,2a,2b,3. Type Synthesis of FullyIsotropic and Decoupled 3T1R Parallel Mechanism[J]. Journal of Shanghai Jiaotong University, 2016, 50(05): 702-709.

References

［1］ZENG D X, HOU Y L, L W J, et al. Comparative analysis of characteristics of the coupled and decoupled parallel mechanisms［J］. Chinese Journal Mechanical Engineering, 2010, 23(4):468476. ［2］HUANG Z, LI Q C. General methodology for type synthesis of lowermobility symmetrical parallel manipulators and several novel manipulators［J］. International Journal of Robotics Research, 2002, 21(2):131145. ［3］LI Q C, HUANG Z, HERV J M. Displacement manifold method for type synthesis of lowermobility parallel mechanisms［J］. Science in China Series E: Technological Sciences, 2004, 47(6):641650. ［4］YANG T L, LIU A X, JIN Q, et al. Position and orientation characteristic equation for topological design of robot mechanisms［J］. Journal of Mechanical Design, 2009, 131(2): 112. ［5］史巧硕，高峰，余发国.基于GF集的三自由度移动并联机构构型研究［J］.上海交通大学学报，2008,42(7):11091115. SHI Qiaoshuo, GAO Feng, YU Faguo. 3 Type synthesis of 3DOF translational parallel mechanisms Based on GF Set［J］. Journal of Shanghai Jiaotong University, 2008,42(7):11091115. ［6］GOGU G. Structural synthesis of fullyisotropic translational parallel robots via theory of linear transformations［J］. European Journal of MechanicsA/Solids, 2004, 23(6):10211039. ［7］LI Weimin, GAO Feng, ZHANG Jianjun. RCUBE a decoupled parallel manipulator only with revolute joints［J］. Mechanism and Machine Theory, 2005, 40(4):467473. ［8］ZENG D X, HUANG Z. Type synthesis of the rotational decoupled parallel mechanism based on screw theory［J］. Science China Technological Sciences, 2011, 54(4):9981004. ［9］张彦斌, 吴鑫. 完全解耦二移动二转动并联机构结构综合［J］. 农业机械学报, 2013, 44(8):250256. ZHANG Yanbing, WU Xin. Structural synthesis of fully decoupled twotranslational and tworotational parallel mechanisms［J］. Transactions of the Chinese Society for Agricultural Machinery, 2013, 44(8):250256. ［10］张帆, 张丹. 基于支链驱动理论的解耦球面转动并联机构型综合［J］. 农业机械学报, 2011, 42(11):195199. ZHANG Fan, ZHANG Dan. Structural synthesis of decoupled spherical parallel mechanism based on drivenchain principle［J］. Transactions of the Chinese Society for Agricultural Machinery, 2011, 42(11):195199. ［11］杭鲁滨, 王彦, 杨廷力. 一种新型三平移一转动解耦并联机构分析［J］. 中国机械工程, 2004, 15(12):10351037. HANG Lubin, WANG Yan, YANG Tingli. Analysis of a new type 3 translations 1 rotation decoupled parallel manipulator ［J］. China Mechanical Engineering, 2004, 15(12):10351037. ［12］马晓丽, 马履中, 汪建平. 新型三平移一转动并联机构及运动学分析［J］. 中国机械工程, 2006, 17(2):191195. MA Xiaoli, MA Luzhong, WANG Jianping. Kinematics analysis of a new three translational and one rotational parallel manipulator［J］. China Mechanical Engineering, 2006, 17(2): 191195. ［13］金琼. 过约束机构与欠秩并联机器人机构研究［D］.南京:东南大学研究生院, 2001. ［14］GAO Feng, LI Weimin, ZHAO Xianchao，et al. New kinematic structures for 2, 3, 4, and 5DoF parallel manipulator designs［J］. Mechanism and Machine Theory, 2002, 37(12):13951411. ［15］黄真，赵永生，赵铁石．高等空间机构学［M］．北京：中国高等教育出版社, 2006:117121.

[1]	FU Chao, FAN Jiacheng, WANG Shigang, LIANG Qinghua. Modelling of Spatial Pose of Ortho-SUV Frame and Mathematical Solution [J]. Journal of Shanghai Jiaotong University, 2020, 54(10): 1007-1014.
[2]	TANG Tengfei1,ZHANG Jun2,ZHAO Yanqin1. Kinetostatic Modeling and Analysis of an ExeVariant Parallel Kinematic Machine [J]. Journal of Shanghai Jiaotong University, 2017, 51(8): 992-999.
[3]	YUAN Lei,YU Haidong,DING Sheng,LI Jianjun. Analysis on Load-sharing Behavior of Multiple Gear System with Geometric Coupled Model [J]. Journal of Shanghai Jiaotong University, 2013, 47(05): 687-691.
[4]	HAO Pei,YU Haidong，ZHAO Yong. Normal Stiffness of Tunnel Surface Contacting with Thrusting Boots of TBM with Various Surface Characteristics [J]. Journal of Shanghai Jiaotong University, 2014, 48(06): 827-832.