Off-Design Performance Prediction in a Transonic Axial Compressor Using Four-Quadrant-Analysis

Abstract

Abstract:

Abstract： Highly accurate performance prediction models based on the streamline curvature method for the through-flow analysis of transonic compressors was developed, of which the minimum loss incidence and off-design loss prediction model were modified. In addition, four-quadrant -analysis, an original method for off-design loss analysis, was proposed to redefine the composite of transonic compressor loss, to make a further exploration on the characteristic of loss at multiple operating conditions, and to reveal the loss distribution and growth law of transonic compressors to a certain extent. Detailed calculations of a highly loaded transonic compressor rotor with the newly developed model was conducted. The results show that the newly developed model and the four-quadrant-analysis method can reliably predict the overall performance and spanwise distribution of aerodynamic parameters at both design and offdesign operating conditions, providing a new idea for off-design performance prediction. In general, the newly developed model and analysis method can be of great service to engineering.

Key words: transonic compressor, through-flow calculation, off-design loss, minimum loss incidence

CLC Number:

V 231
TK 474

XU Xi,QIANG Xiaoqing,TENG Jinfang. Off-Design Performance Prediction in a Transonic Axial Compressor Using Four-Quadrant-Analysis[J]. Journal of Shanghai Jiaotong University, 2015, 49(09): 1416-1421.

References

［1］Boyer K M, O’Brien W F. An improved streamline curvature approach for offdesign analysis of transonic axial compression systems［C］∥ASME Turbo Expo 2002. Power for Land, Sea, and Air. America: Society of Mechanical Engineers, 2002: 803811.

［2］Biollo R, Benini E. Shock/boundarylayer/tipclearance interaction in a transonic rotor blade［J］. Journal of Propulsion and Power, 2009, 25(3): 668677.

［3］Pachidis V, Templalexis I, Pilidis P. A dynamic convergence control algorithm for the solution of two dimensional streamline curvature methods［C］∥ASME Turbo Expo 2009. Power for Land, Sea, and Air. America: Society of Mechanical Engineers, 2009: 287296.

［4］Petrovic M V, Wiedermann A, Banjac M B. Development and validation of a new universal through flow method for axial compressors［C］∥ASME Turbo Expo 2009. Power for Land, Sea, and Air. America: Society of Mechanical Engineers, 2009: 579588.

［5］Aungier R H. Axialflow compressor: A strategy for aerodynamic design and analysis ［M］. New York: ASME Press, 2003.

［6］Gill A, Von Backstrom T W, Harms T M. The flow field within an axial flow compressor at extremely high flow coefficients［C］∥ASME Turbo Expo 2010. Power for Land, Sea, and Air. America: Society of Mechanical Engineers, 2010: 355367.

［7］Gill A, Von Backstrm T W, Harms T M. Flow fields in an axial flow compressor during four quadrant operation［J］. Journal of Turbomachinery, 2014, 136(6): 061007.

［8］胡江峰, 欧阳华, 竺晓程, 等. 跨音速压气机非设计点性能预测［J］. 上海交通大学学报, 2010,44(10): 13421346.

HU Jiangfeng, OUYANG Hua, ZHU Xiaocheng, et al. Performance prediction of transonic axial compressor at offdesign points［Ｊ］. Journal of Shanghai Jiaotong Ｕniversity, 2010, 44(10): 13421346.

［9］胡江峰, 竺晓程, 杜朝辉. 一种跨声速轴流压气机性能预测的数值方法［J］. 航空动力学报，2011, 26(1): 122127.

HU Jiangfeng, ZHU Xiaocheng, DU Chaohui. Numerical method of transonic axial compressor performance prediction［J］. Journal of Aerospace Power, 2011, 26(1): 122127.

[1]	ZHAO Ziren1, DU Shichang1, HUANG Delin1, REN Fei2, LIANG Xinguang2. Modelling and Bottleneck Analysis of Product Quality in Transient Phase#br# of MultiStage Manufacturing Systems Based on Markovian Chains [J]. Journal of Shanghai Jiao Tong University, 2017, 51(10): 1166-1173.
[2]	ZHOU Penghui, MA Hongzhan, CHEN Dongping, CHEN Mengyue, CHU Xuening. Identification of Product Redesign Modules Based on#br# Fuzzy Random Failure Mode and Effects Analysis [J]. Journal of Shanghai Jiao Tong University, 2017, 51(10): 1189-1195.
[3]	LI Changxi1, 2, ZHOU Yan1, LIN Han3, LI Lingzhi1, GUO Ge1. TemporalSpatial Sequential Fusion Recognition Method of#br# Ballistic Missile Target Based on MIMOFNN Model [J]. Journal of Shanghai Jiao Tong University, 2017, 51(9): 1138-.
[4]	FENG Mingyue, HE Minghao, HAN Jun, YU Chunlai. High Resolution Direction of Arrival Estimation Based on#br# Covariance Fitting Estimation of Signal Parameters by#br# Rotational Invariance Technique Algorithm [J]. Journal of Shanghai Jiao Tong University, 2017, 51(9): 1145-.
[5]	?YANG Ping1,SHENG Jie1,WANG Yucheng2,LI Zhuyong1,JIN Zhijian1,HONG Zhiyong1. Quench Propagation Characteristics Influenced by NonUniform Properties of YBa2Cu3O7δ High Temperature Superconducting Tape [J]. Journal of Shanghai Jiaotong University, 2017, 51(9): 1090-1096.
[6]	WANG Xing, ZHOU Yipeng, TIAN Yuanrong, CHEN You, ZHOU Dongqing, HE Jiyuan. Sparse Decomposition for Frequency Modulation Radar Signal Based on#br# Advanced Genetic Algorithm and SinChirplet Atom [J]. Journal of Shanghai Jiao Tong University, 2017, 51(9): 1124-1130.
[7]	ZHANG Liangjun1, 2, LI Xiaoci1, WU Jingyi1, CAI Aifeng1. ThermalStructure Coupling Analysis of #br# Microgravity Environment Simulation Suspension Structure for #br# Large Space Deployable Mechanisms [J]. Journal of Shanghai Jiao Tong University, 2017, 51(8): 954-961.
[8]	XIA Hailiang1, 2, LIU Yakun1, 2, LIU Quanzhen3, LIU Baoquan3, FU Zhengcai1, 2. Metal Ablation Affected by Electrode Shapes Under#br# Long Continuing Lightning Current [J]. Journal of Shanghai Jiao Tong University, 2017, 51(8): 903-908.
[9]	LIN Da, ZHU Yijia, WEI Xiaodong, WANG Zhiyu, ZHANG Wugao. Combustion and Particle Emission Characteristics Affected by#br# Fuel Supply Parameters for a Diesel Engine Fuelled with#br# Polyoxymethylene Dimethyl Ethers/Diesel [J]. Journal of Shanghai Jiao Tong University, 2017, 51(7): 787-795.
[10]	GU Jiayang, XIE Yulin, TAO Yanwu, HUANG Xianghong, WU Jie. Numerical Simulation and Experimental Study on VortexInduced#br# Motion of a New Type of Floating Drilling Production Storage Offloading [J]. Journal of Shanghai Jiao Tong University, 2017, 51(7): 878-885.
[11]	MENG Qingyang1, YAN Weiwu1, HU Yong1, CHENG Jianlin1, CHEN Shihe2, ZHANG Xi2. Model Identification Based on Subspace Model Identification of#br# Superheated Steam System in UltraSupercritical CoalFired Power Unit [J]. Journal of Shanghai Jiao Tong University, 2017, 51(6): 672-678.
[12]	JIANG Huajuna, CAI Yana, b, LI Chaohaoa, LI Fanga, b, HUA Xueminga, b. Recognition Method for Gas Pores on XRay Image of Lap Joints#br# Based on the Improved Sobel Algorithm [J]. Journal of Shanghai Jiao Tong University, 2017, 51(6): 665-671.
[13]	DONG Guanhua,YIN Qin,YIN Guofu,XIANG Zhaowei. Identification and Modeling of Coupling Dynamic Stiffness in Joints of Machine Tool [J]. Journal of Shanghai Jiaotong University, 2015, 49(09): 1263-1434.
[14]	XIE Qijiang,YU Haidong. Coupling Relationship Between Loads on Cutterhead of Tunnel Boring Machine and Contact Stiffness of Gripper Shoes and Rocks [J]. Journal of Shanghai Jiaotong University, 2015, 49(09): 1269-1275.
[15]	ZHONG Jianlin1,MA Dawei1,REN Jie1,LI Shijun2,WANG Xu3. Static Compression Analysis of Rubber Hollow Cylinder Based on Plane Strain Assumption [J]. Journal of Shanghai Jiaotong University, 2015, 49(09): 1276-1280.