Laboratory Model Test Study of Pullout Mechanism of Tunnel Anchorage

Abstract

Abstract:

Abstract： A laboratory model test of tunnel anchorage was conducted to investigate its pullout mechanism and bearing capacity. First, a laboratory model test device was designed and produced. Second, through the strength and deformation test, the material ratio was determined to simulate tunnel rock. Third, the surface and rock deformation, strain and stress were measured during the entire test process. The results show that, under pulling loads, tensile failure first occurs in top surface rock near the anchorage, then shear failure occurs in the rock around the anchorage. The failure surface is inverted cone from the anchorage bottom. The bearing capacity of the tunnel anchorage consists of two parts. The first part is the ultimate friction resistance in the interface of anchorage and rock while the second part is the rock sheartensile resistancenamely clamping effect. Under 50 times design cable force, the tunnel rock is in elastic stage, suggesting that the current tunnel anchorage design is quite conservative and can be further optimized.

Key words: tunnel anchorage, laboratory model test, pullout mechanism, shear-tensile failure, bearing capacity

CLC Number:

TU 42

TANG Hua,XIONG Xiaorong,WU Zhenjun,YUAN Conghua,Deng Qin. Laboratory Model Test Study of Pullout Mechanism of Tunnel Anchorage[J]. Journal of Shanghai Jiaotong University, 2015, 49(07): 935-939.

References

［1］夏才初，程鸿鑫，李荣强．广东虎门大桥东锚碇现场结构模型试验研究［J］.岩石力学与工程学报，1997,16（6）：571576.

XIA Caichu, CHENG Hongxin, LI Rongqiang. Testing study on field structure model of the east anchorage of Guangdong Humen bridge［J］. Chinese Journal of Rock Mechanics and Engineering, 1997,16(6):571576.

［2］董志宏,张奇华,丁秀丽,等. 矮寨悬索桥隧道锚碇稳定性数值分析［J］. 长江科学院院报,2005,22（6):6064.

DONG Zhihong, ZHANG Qihua, DING Xiuli,et al.Numerical analysis of rockmass stability in tunnel anchoring of aizhai bridge［J］. Journal of Yangtze River Scientific Research Institute, 2005,22（6):6064.

［3］朱玉,卫军,李昊,等. 大跨径悬索桥隧道锚变位分析［J］. 岩石力学与工程学报,2005,24(19):190195.

ZHU Yu, WEI Jun, LI Hao, et al. Analysis of displacements of tunneltype anchorage for a largespan suspension bridge［J］. Chinese Journal of Rock Mechanics and Engineering, 2005,24(19):190195.

［4］张利洁,黄正加,丁秀丽. 四渡河特大桥隧道锚碇三维弹塑性数值分析［J］. 岩石力学与工程学报,2004,23(Sup.2):49714974.

ZHANG Lijie, HUANG Zhengjia, DING Xiuli. Numerical analysis with flac 3D of tunnel anchorage of sidu river bridge［J］. Chinese Journal of Rock Mechanics and Engineering, 2004,23(Sup.2):49714974.

［5］胡波,赵海滨,王思敬,等. 隧道锚围岩拉拔模型试验研究及数值模拟［J］. 岩土力学,2009,30(6):15751582.

HU Bo, ZHAO Haibin,WANG Sijing, et al. Pullout model test for tunnel anchorage and numerical analysis［J］. Rock and Soil Mechanics, 2009,30(6):15751582.

［6］邬爱清,彭元诚,黄正加,等. 超大跨度悬索桥隧道锚承载特性的岩石力学综合研究［J］. 岩石力学与工程学报,2010,29(3):433441.

WU Aiqing,PENG Yuancheng,HUANG Zhengjia, et al.Rock mechanics comprehensive study of bearing capacity characteristics of tunnel anchorage for superlarge span suspension bridge［J］. Chinese Journal of Rock Mechanics and Engineering, 2010, 29(3): 433441.

［7］朱杰兵,邬爱清,黄正加,等.四渡河特大悬索桥隧道锚模型拉拔试验研究［J］. 长江科学院院报,2006,23(4):5155.

ZHU Jiebing, WU aiqing, HUANG Zhengjia, et al.Pulling test of anchorage model of siduhe suspension bridge［J］. Journal of Yangtze River Scientific Research Institute, 2006,23(4):5155.

［8］汪海滨,高波,朱栓来,等. 四渡河特大桥隧道式锚碇数值模拟［J］. 中国公路学报,2006,19(6):7378.

WANG haibin, GAO bo, ZHU shuanlai, et al. A numerical simulation on tunel anchorage of siduhe super long bridge［J］. China Journal of Highway and Transport, 2006, 19(6):7378.

［9］朱玉. 隧道锚设计体系中的关键问题研究与实践［D］.武汉：华中科技大学土木工程与力学学院,2005.

［10］余美万, 张奇华.普立特大桥隧道锚抗拔机理现场模型试验研究报告［R］.武汉：长江科学院,2014.

［11］罗先启,葛修润.滑坡模型试验理论及其应用［M］.北京:中国水利水电出版社,2008.

［12］李晓红,卢义玉,康勇,等.岩力学实验模拟技术［M］.北京:科学出版社,2007.

［13］GBT 502662013,工程岩体试验方法标准［S］.

[1]	CHEN Peishuai, PAN Yazhou, LIANG Fayun, LI Dejie. Consolidation Characteristics and Bearing Behavior of Sand Pile Composite Foundation in Caisson Heightening [J]. Journal of Shanghai Jiao Tong University, 2021, 55(6): 707-715.
[2]	BAI Xiaoyu (白晓宇), ZHENG Chen (郑晨), ZHANG Mingyi ∗ (张明义),LIU Xueying (刘雪颖), KUANG Zheng (匡政). Bond Mechanical Properties of Glass Fiber Reinforced Polymer Anti-Floating Anchor in Concrete Baseplate [J]. J Shanghai Jiaotong Univ Sci, 2021, 26(6): 804-812.
[3]	JIN Xiaokai, CHEN Jinjian, LIAO Chencong. Wave Flume Simulation Experiment on Influence of Wave Load on Bearing Capacity of Monopile [J]. Journal of Shanghai Jiao Tong University, 2021, 55(4): 365-371.
[4]	LI Jingpei, XU Zihan. Prediction of Ultimate Bearing Capacity of Long-Term Loaded Piles [J]. Journal of Shanghai Jiao Tong University, 2021, 55(4): 380-386.
[5]	YANG Deqing，QIN Haoxing. Metamaterials Design with Arbitrary Poisson’s Ratio by Functional Element Topology Optimization [J]. Journal of Shanghai Jiaotong University, 2019, 53(7): 819-829.
[6]	HAN Jing-yan, ZHAO Qiang, WU Bin-bin, JIANG Yu-fei, YUAN Guo-dong. How to Improve the Bearing Capacity of Lifting Point for Jacket Removal [J]. Ocean Engineering Equipment and Technology, 2019, 6(1): 444-449.
[7]	MA Yong-qi, YANG Jin, SHI Shan-shan, HU Nan-ding, YANG Guo-dong, LIU Xun. Influence of Shallow Gas Formation in the Bohai Sea on Penetration of Jack-up Drilling Platform [J]. Ocean Engineering Equipment and Technology, 2018, 5(增刊): 10-14.
[8]	OUYANG Fang, ZHANG Jianjing, DENG Xiaoning, HAN Jianwei, BI Junwei, DU Lin. Analysis of Load Capacity Behaviors of Steel Fiber Reinforced Concrete Piles Through Model Tests [J]. Journal of Shanghai Jiao Tong University, 2016, 50(03): 364-369.
[9]	OUYANG Li-juna,b* (欧阳利军), LU Zhou-daoc (陆洲导), CHEN Wei-zhenb (陈惟珍). Flexural Experimental Study on Continuous Reinforced Concrete Beams Strengthened with Basalt Fiber Reinforced Polymer/Plastic [J]. Journal of shanghai Jiaotong University (Science), 2012, 17(5): 613-618.
[10]	ZHANG Tao-Tao, ZHANG Meng-Xi, HOU Juan. Bearing Capacity Behavior and Failure Modes of H-V Reinforcement Foundation Based on Strength Reduction Finite Element Method [J]. Journal of Shanghai Jiaotong University, 2011, 45(05): 757-761.
[11]	SONG Guang, BIAN Xue-Cheng, JIANG Jian-Qun, CHEN Yun-Min. Deformation Behaviors and Bearing Capacity of GeosyntheticsReinforced Pavement [J]. Journal of Shanghai Jiaotong University, 2011, 45(05): 653-658.
[12]	LI Cheng-wei, CHEN Jin-jian, WU Qiong, XIA Xiao-he, WANG Jian-hua. Bearing Mechanism and Calculation Method of Screw Pile [J]. Journal of Shanghai Jiao Tong University, 2010, 44(06): 726-730.
[13]	LIANG Benliang，LIU Jianxin. Ultimate Bearing Capacity of ConcreteFilled Circular Steel Tubular Short Columns under Axial Compression [J]. Journal of Shanghai Jiaotong University, 2010, 44(06): 749-0754.
[14]	HUANG Ji-long, CHEN Jin-jian, WANG Jian-hua. Numerical Analysis on the Bearing Capacity of Post-grouting Bored Pile under Vertical Load [J]. Journal of Shanghai Jiao Tong University, 2006, 40(12): 2122-2125.
[15]	YANG Hong-jie, GE Xiu-run, WANG Jian-hua, FU De-ming. Application of SQP Algorithm in 3D Lower Sequential Quadratic Programming Limit Analysis [J]. Journal of Shanghai Jiao Tong University, 2004, 38(06): 992-995.