A Novel Design Method for Impeller of Medium Specific Speed Non-Overload Multistage Centrifugal Pumps

Abstract

Abstract:

Abstract： To meet the demand of the non-overload characteristic of medium specific speed multistage centrifugal pumps, a formula for the design of impeller was derived by using empirical correlations, based on the theory of non-overload. Two pumps, the specific speeds of which were 89.3 and 135.0, were designed using this formula and the traditional formula, and the performance curves were obtained using Fluent. The results indicate that the extreme point of shaft power curve appeares in both of the pumps designed using the derived formula, and the coefficient K, the ratio of the maximal axle power to the power in designed working condition are 1.13 and 1.03, validiting the derived formula. Compared with the pumps designed using the traditional formula, the head of the pumps designed using the derived formula increases by 14.0% and 7.5%, and the efficiency increases by 2.68% and 1.03%. Meanwhile the radial dimension becomes smaller. The derived formulas can be used for medium specific speed non-overload multistage centrifugal pumps.

Key words: medium specific speed, multistage, centrifugal pump, impeller, non-overload

CLC Number:

TH 311

MA Yi1,2,MA Zhongqiang1,ZHANG Shengchang1,2,ZHANG Zhihong1,FAN Weigang3,WANG Jinquan3. A Novel Design Method for Impeller of Medium Specific Speed Non-Overload Multistage Centrifugal Pumps[J]. Journal of Shanghai Jiaotong University, 2015, 49(05): 695-701.

References

［1］汪家琼，孔繁余. 多级离心泵叶轮与导叶水力性能优化研究［J］.华中科技大学学报:自然科学版, 2013，41(3)：9296.

WANG Jiaqiong, KONG Fanyu. Hydraulic performance optimization study on impeller and diffuser of multistage pump［J］. Journal of Huazhong University of Science and Technology:Natural Science Edition, 2013,41(3): 9296.

［2］袁寿其.低比速离心泵理论与设计［M］.北京：机械工业出版社，1997：68104.

［3］Shi W D，Long F，Li Y, et al. Nonoverload design of low specific speed submersible pump［C］∥ASME 2010 3rd Joint USEuropean Fluids Engineering Summer Meeting and 8th International Conference on Nanochannels, Microchannels, and Minichannels. Montreal, Canada: American Society of Mechanical Engineer, 2010: 563567.

［4］施卫东，李辉，陆伟刚，等. 进口预旋对低比速离心泵无过载性能的影响［J］. 农业机械学报，2013，44(5)：5054, 112.

SHI Weidong, LI Hui, LU Weigang, et al. Effect of prewhirl flow on nonoverload performance of lowspecificspeed centrifugal pumps［J］. Transactions of the Chinese Society for Agricultural Machinery, 2013, 44(5): 5054, 112.

［5］张金凤，沈艳宁，袁寿其，等. 带分流叶片离心泵无过载特性的理论与试验研究［J］. 排灌机械工程学报， 2010, 28(5): 407411, 454.

ZHANG Jinfeng, SHEN Yanning, YUAN Shouqi, et al. Theory and experiment on nonoverload characteristics for centrifugal pump with splitters［J］. Journal of Drainage and Irrigation Machinery Engineering, 2010, 28(5): 407411,454.

［6］杨军虎，郭斌，王玥，等. 无过载离心泵设计参数与性能关系研究［J］. 农业机械学报, 2012, 43(11)： 119122, 128.

YANG Junhu, GUO Bin, WANG Yue, et al. Relationship of performances and design parameters for nonoverload centrifugal pumps［J］. Transactions of the Chinese Society for Agricultural Machinery, 2012, 43(11):119122,128.

［7］司乔瑞，袁寿其，王川，等. 低比速多级潜水泵优化设计［J］. 农业工程学报, 2012, 28(8): 122127.

SI Qiaorui, YUAN Shouqi, WANG Chuan，et al. Optimal design of submersible multistage pumps with low specific speed［J］. Transactions of the Chinese Society of Agricultural Engineering, 2012, 28(8):122127.

［8］张帆，袁寿其，付强，等. 带分流叶片低比转速无过载离心泵优化设计［J］.流体机械，2013，41(6)：1115,21.

ZHANG Fan, YUAN Shouqi, FU Qiang, et al. Nonoverload optimization design on low specific speed centrifugal pump with splitter blades［J］. Fluid Machinery, 2013, 41(6): 1115, 21.

［9］Braun O, Avellan F, Dupont P. Unsteady numerical simulations of the flow related to the unstable energydischarge characteristic of a medium specific speed double suction pump［C］∥ASME/JSME 2007 5th Joint Fluids Engineering Conference. San Diego, California, USA: American Society of Mechanical Engineers, 2007: 971978.

［10］Zhang F, Yuan S Q, Fu Q, et al. Optimization design and inner flow analysis on a mediumhigh specific speed centrifugal pump［C］∥ASME 2013 Fluids Engineering Division Summer Meeting. Incline Village, Nevada, USA: American Society of Mechanical Engineers, 2013: 17.

［11］Hu B, Yuan S Q, Lu W G, et al. Numerical optimal design of a nonoverload centrifugal pump［C］∥ASME 2012 Fluids Engineering Summer Meeting. Rio Grande, Puerto Rico: American Society of Mechanical Engineers, 2012: 427433.

［12］王洋, 刘洁琼, 何文俊. 无过载离心泵结构参数优化设计［J］. 农业工程学报, 2012, 28(3): 3337.

WANG Yang, LIU Jieqiong, HE Wenjun. Parameter optimization of nonoverload centrifugal pump［J］. Transactions of the Chinese Society of Agricultural Engineering, 2012, 28(3): 3337.

［13］刘在伦，李朴蓉. 基于Matlab的泵可用汽蚀余量曲线拟合方法探讨［J］. 流体机械, 2012, 40(7): 4851.

LIU Zailun, LI Purong. Research about fitting approach of pump available NPSH curve based on Matlab［J］. Fluid Machinery, 2012, 40(7): 4851.

［14］关醒凡. 现代泵理论与设计［M］. 北京: 中国宇航出版社, 2011: 254258.

［15］陈芳芳, 李志鹏, 王昌生. 首级叶轮结构对多级泵效率影响的数值模拟［J］. 电站系统工程, 2013, 29(3): 911.

CHEN Fangfang, LI Zhipeng, WANG Changsheng. Numerical simulation of first stage impeller structure influencing efficiency of multistage pumps［J］. Power system Engineering, 2013, 29(3): 911.

［16］孔繁余，宿向辉，陈浩，等. 离心泵径向导叶正叶片参数的优化设计［J］. 农业工程学报, 2012, 28(23): 4045.

KONG Fanyu, SU Xianghui, CHEN Hao, et al. Optimal design on parameters of guide vane of radial diffusers in centrifugal pump［J］. Transactions of the Chinese Society of Agricultural Engineering, 2012, 28(23): 4045.

[1]	LIU Qinghua. Research on Multistage Depressurization Technology in the East China Sea Oil and Gas Fields [J]. Ocean Engineering Equipment and Technology, 2025, 12(1): 61-66.
[2]	SUN Yuetong, MENG Fankai, ZHOU Lin, XU Chenxin. Comprehensive Analysis of Performance of Air Cooled Multistage Thermoelectric Cooler [J]. Journal of Shanghai Jiao Tong University, 2024, 58(3): 371-381.
[3]	LI Jia, LI Huacong, WANG Yue. Transient Characteristics of a High-Speed Aero-Fuel Centrifugal Pump in Variable Gas-Liquid Ratio Conditions [J]. Journal of Shanghai Jiao Tong University, 2022, 56(5): 622-634.
[4]	ZHANG Yuan, LI Fanchun, JIA Dejun. Design and 3D Printing Simulation of a Lattice Compressor Impeller [J]. Journal of Shanghai Jiao Tong University, 2021, 55(6): 729-740.
[5]	YANG Sunsheng, SHAO Ke, DAI Tao. Influence of Parallel Impeller Inlet Trimming on Mixed Flow Pump as Turbine [J]. Journal of Shanghai Jiaotong University, 2020, 54(8): 805-812.
[6]	MOU Jiegang, ZHANG Zicheng, GU Yunqing, SHI Zhengzan, ZHENG Shuihua. Effect of Circular Non-Smooth Surface Blades on Cavitation Characteristics of Centrifugal Pump [J]. Journal of Shanghai Jiaotong University, 2020, 54(6): 577-583.
[7]	NI He,QIN Haibo,JIN Jiashan,SUN Fengrui . Characteristic Identification and Cavitation Analysis of Centrifugal Pump Based on Differential Evolution Algorithm with Residual Correction [J]. Journal of Shanghai Jiaotong University, 2018, 52(7): 831-836.
[8]	MOU Jieganga,WU Zhenxinga,ZHOU Peijiana,GU Yunqinga,WU Denghaob,REN Yunb. Transient Flow Characteristics in Self-Priming Centrifugal Pump Volute MOU Jieganga,WU Zhenxinga,ZHOU Peijiana,GU Yunqinga,WU Denghaob,REN Yunb [J]. Journal of Shanghai Jiaotong University, 2018, 52(4): 461-468.
[9]	LI Guilong,DU Shichang. Modeling and Analyzing for Stream of Variations in#br# Multistage Manufacturing Processes of Cylinder Block [J]. Journal of Shanghai Jiaotong University, 2017, 51(4): 385-.
[10]	DAI Cuia，DONG Liangb，KONG Fanyub，BAI Yuxingb，XIA Binb. Noise Reduction by Actively Leaning Blades in Centrifugal Pump as Turbine [J]. Journal of Shanghai Jiaotong University, 2016, 50(04): 575-582.
[11]	MOU Jiegang1,DAI Dongshun1,GU Yunqing1,LIU Jian1,ZHENG Shuihua1,WANG Evan2. Characteristics of NonSmooth Surface Drag Reduction Influence on Centrifugal Pump Impeller [J]. Journal of Shanghai Jiaotong University, 2016, 50(02): 306-312.
[12]	ZHU Rongsheng1,XING Shubing1,LONG Yun2,WANG Xiuli1,HE Bo1,CAO Liang1. Unequal Head Hydraulic Optimal Design and Experiment on a Non-clogging Centrifugal Pump [J]. Journal of Shanghai Jiaotong University, 2015, 49(05): 675-680.
[13]	XU Rui1,DU Shichang1,REN Fei2,LIANG Xinguang2,LIU Weihong2. Quality Analysis of Correlated MultiStage Manufacturing Systems Based on Markov Model [J]. Journal of Shanghai Jiaotong University, 2015, 49(05): 669-674.
[14]	PAN Xiao1, 2,WANG Wenping1, 2,LI Shulin1, 2,XIAO Ruofu3,PAN Changchun4. Digital Design and Validation of Fuel Pump with Complex Centrifugal Impeller [J]. Journal of Shanghai Jiaotong University, 2014, 48(08): 1164-1169.
[15]	LIU Hou-Lin, YANG Dong-Sheng, TAN Ming-Gao, WANG Kai, ZHUANG Su-Guo, DU Hui. 3D-PIV Measurements of Stall in DoubleBlade Centrifugal Pump [J]. Journal of Shanghai Jiaotong University, 2012, 46(05): 734-739.