Exergy Performance Analysis of an Electric Vehicle Heat Pump System Under Variable Conditions

Abstract

Abstract:

Abstract： Based on the experimental data and the first and second law of thermodynamics, outside air temperature and compressor speed, the coefficient of performance (COP) and exergy destruction and exergy efficiency of an electric vehicle heat pump system were deduced by changing conditions involving refrigerant (R134a) charge. The results show that the optimum refrigerant charge is at 400 g. The exergy destruction is within a range of 0.61-1.28 kW. The condenser and the evaporator has a relatively lower exergy efficiency (37.9%-53.1% for condenser and 34.2%-61.8% for evaporator, respectively).
Key words： electric vehicle heat pump system (EVHPS); refrigerant charge; variable conditions; exergy performance

CLC Number:

TK 123

SUN Xudong,GU Bo,TIAN Zhen. Exergy Performance Analysis of an Electric Vehicle Heat Pump System Under Variable Conditions[J]. Journal of Shanghai Jiaotong University, 2015, 49(05): 608-613.

References

［1］谢卓, 陈江平, 陈芝久. 电动车热泵空调系统的设计分析［J］. 汽车工程, 2006, 28(8): 763765.

XIE Zhuo, CHEN Jiangping, CHEN Zhijiu. The design and analysis of heat pump system in electric vehicle ［J］. Automobile Engineering, 2006, 28(8): 763765.

［2］Hosoz M, Direk M. Performance evaluation of an integrated automotive air conditioning and heat pump system ［J］. Energy Conversion and Management, 2006, 47(5): 545559.［3］Kim S C, Kim M S, Hwang I C, et al. Performance evaluation of a CO2 heat pump system for fuel cell vehicles considering the heat exchanger arrangements ［J］. International Journal of Refrigeration, 2007, 30(7): 11951206.

［4］Shin S, Yun C, Lim S J, et al. R134a heat pump application for the buses by using engine coolant as a heat source ［R］. USA: SAE Technical Paper, 2008012697, 2008.

［5］Lee D Y, Cho C W, Won J P, et al. Performance characteristics of mobile heat pump for a large passenger electric vehicle ［J］. Applied Thermal Engineering, 2013, 50(1): 660669.

［6］Chen L G, Zhu X Q, Sun F R, et al. Exergybased ecological optimization for a generalized irreversible Carnot heatpump ［J］. Applied Energy, 2007, 84(1): 7888.

［7］Tian Z, Gu B, Yang L, et al. Performance prediction for a parallel flow condenser based on artificial neural network ［J］. Applied Thermal Engineering, 2014, 63 (1): 459467.

［8］吴业正. 制冷原理及设备［M］. 西安：西安交通大学出版社, 2010.

［9］张永贵. 热泵定义的拓展及其火用效率表达式的改进［J］. 暖通空调，2002, 32（1）: 99100.

ZHANG Yonggui. Discussion on development of heat pump definition and improvement of an exergy efficiency formula ［J］. Heating Ventilating and Air Conditioning, 2002，32（1）: 99100.

［10］张萍, 谷波, 王婷, 等. 多元微通道平行流冷凝器理论模型与实验研究［J］. 上海交通大学学报, 2013, 47(11):17381744.

ZHANG Ping, GU Bo, WANG Ting, et al. Theoretical model and experimental research on multiple microchannel parallel flow condenser［J］. Journal of Shanghai Jiaotong University, 2013, 47(11): 17381744.

［11］梁任, 余岳峰, 陈亮乐, 等. 螺杆膨胀机有机朗肯循环系统的变工况特性［J］. 上海交通大学学报, 2014, 48(9):12911296.

LIANG Ren, YU Yuefeng, CHEN Liangle, et al. Characteristics of variable conditions of screw expander system based on organic rankine cycle［J］. Journal of Shanghai Jiaotong University, 2014, 48(9):12911296.

[1]	ZHAO Ziren1, DU Shichang1, HUANG Delin1, REN Fei2, LIANG Xinguang2. Modelling and Bottleneck Analysis of Product Quality in Transient Phase#br# of MultiStage Manufacturing Systems Based on Markovian Chains [J]. Journal of Shanghai Jiao Tong University, 2017, 51(10): 1166-1173.
[2]	ZHOU Penghui, MA Hongzhan, CHEN Dongping, CHEN Mengyue, CHU Xuening. Identification of Product Redesign Modules Based on#br# Fuzzy Random Failure Mode and Effects Analysis [J]. Journal of Shanghai Jiao Tong University, 2017, 51(10): 1189-1195.
[3]	LI Changxi1, 2, ZHOU Yan1, LIN Han3, LI Lingzhi1, GUO Ge1. TemporalSpatial Sequential Fusion Recognition Method of#br# Ballistic Missile Target Based on MIMOFNN Model [J]. Journal of Shanghai Jiao Tong University, 2017, 51(9): 1138-.
[4]	FENG Mingyue, HE Minghao, HAN Jun, YU Chunlai. High Resolution Direction of Arrival Estimation Based on#br# Covariance Fitting Estimation of Signal Parameters by#br# Rotational Invariance Technique Algorithm [J]. Journal of Shanghai Jiao Tong University, 2017, 51(9): 1145-.
[5]	?YANG Ping1,SHENG Jie1,WANG Yucheng2,LI Zhuyong1,JIN Zhijian1,HONG Zhiyong1. Quench Propagation Characteristics Influenced by NonUniform Properties of YBa2Cu3O7δ High Temperature Superconducting Tape [J]. Journal of Shanghai Jiaotong University, 2017, 51(9): 1090-1096.
[6]	WANG Xing, ZHOU Yipeng, TIAN Yuanrong, CHEN You, ZHOU Dongqing, HE Jiyuan. Sparse Decomposition for Frequency Modulation Radar Signal Based on#br# Advanced Genetic Algorithm and SinChirplet Atom [J]. Journal of Shanghai Jiao Tong University, 2017, 51(9): 1124-1130.
[7]	ZHANG Liangjun1, 2, LI Xiaoci1, WU Jingyi1, CAI Aifeng1. ThermalStructure Coupling Analysis of #br# Microgravity Environment Simulation Suspension Structure for #br# Large Space Deployable Mechanisms [J]. Journal of Shanghai Jiao Tong University, 2017, 51(8): 954-961.
[8]	XIA Hailiang1, 2, LIU Yakun1, 2, LIU Quanzhen3, LIU Baoquan3, FU Zhengcai1, 2. Metal Ablation Affected by Electrode Shapes Under#br# Long Continuing Lightning Current [J]. Journal of Shanghai Jiao Tong University, 2017, 51(8): 903-908.
[9]	LIN Da, ZHU Yijia, WEI Xiaodong, WANG Zhiyu, ZHANG Wugao. Combustion and Particle Emission Characteristics Affected by#br# Fuel Supply Parameters for a Diesel Engine Fuelled with#br# Polyoxymethylene Dimethyl Ethers/Diesel [J]. Journal of Shanghai Jiao Tong University, 2017, 51(7): 787-795.
[10]	GU Jiayang, XIE Yulin, TAO Yanwu, HUANG Xianghong, WU Jie. Numerical Simulation and Experimental Study on VortexInduced#br# Motion of a New Type of Floating Drilling Production Storage Offloading [J]. Journal of Shanghai Jiao Tong University, 2017, 51(7): 878-885.
[11]	MENG Qingyang1, YAN Weiwu1, HU Yong1, CHENG Jianlin1, CHEN Shihe2, ZHANG Xi2. Model Identification Based on Subspace Model Identification of#br# Superheated Steam System in UltraSupercritical CoalFired Power Unit [J]. Journal of Shanghai Jiao Tong University, 2017, 51(6): 672-678.
[12]	JIANG Huajuna, CAI Yana, b, LI Chaohaoa, LI Fanga, b, HUA Xueminga, b. Recognition Method for Gas Pores on XRay Image of Lap Joints#br# Based on the Improved Sobel Algorithm [J]. Journal of Shanghai Jiao Tong University, 2017, 51(6): 665-671.
[13]	DONG Guanhua,YIN Qin,YIN Guofu,XIANG Zhaowei. Identification and Modeling of Coupling Dynamic Stiffness in Joints of Machine Tool [J]. Journal of Shanghai Jiaotong University, 2015, 49(09): 1263-1434.
[14]	XIE Qijiang,YU Haidong. Coupling Relationship Between Loads on Cutterhead of Tunnel Boring Machine and Contact Stiffness of Gripper Shoes and Rocks [J]. Journal of Shanghai Jiaotong University, 2015, 49(09): 1269-1275.
[15]	ZHONG Jianlin1,MA Dawei1,REN Jie1,LI Shijun2,WANG Xu3. Static Compression Analysis of Rubber Hollow Cylinder Based on Plane Strain Assumption [J]. Journal of Shanghai Jiaotong University, 2015, 49(09): 1276-1280.