Analysis of RC Arch Strengthen by Bonded FRP Under Initial Stress

Abstract

Abstract:

Abstract： The paper aims at the drawbacks and difficulties in nonlinear numerical simulation of pasting FRP to reinforce concrete arch structure. Based on 3 FRP reinforced test of concrete arch structure, it introduces technologies such as the concrete plastic damage model, cohesive behavior, embedded and model change etc into nonlinear numerical analysis, realizing the simulation of some key mechanical properties such as concrete damage, FRPconcrete interface paste slip and initial load, etc. The comparison of reinforced test and numerical simulation that the ultimate bearing capacity of the structure by adopting cross section reinforcement, is increased by 14.47%, the ultimate bearing capacity of the structure is increased by 27.60%, and analytical error of cracking load is within 7.79%, analytical error of ultimate load is relatively small, and the maximum value is 4.88% which shows that the numerical analysis method proposed in the paper is feasible, and can provide basis for further research on pasting FRP to reinforce concrete arch structure.

Key words: reinforced concrete (RC) arch, fiber reinforce plastic（FRP）, cohesive behavior, concrete plastic damage, initial stress

CLC Number:

U 445．72

REN Wei1,GAI YiTing2,ZHANG Gang1. Analysis of RC Arch Strengthen by Bonded FRP Under Initial Stress[J]. Journal of Shanghai Jiaotong University, 2015, 49(02): 232-238.

References

［1］Grelle S V, Sneed L H. Review of anchorage systems for externally bonded FRP laminates［J］. International Journal of Concrete Structures and Materials,2013, 7(1):1733.

［2］Guan Y, Jiang B, Song X. Experimental study and numerical simulation on bonding behavior of the new HBFRP strengthening technology ［J］. Journal of Performance of Constructed Facilities，2012. 26(2): 220227.

［3］王吉忠赵玉杰.CFRP持载加固高强混凝土偏压柱受力性能研究［J］.土木工程学报,2010,43(sup.):6975.

WANG Jizhong, ZHAO Yujie. Behaviors and CFRP analysis of highstrength concrete columns confined by sheets under sustained eccentric compression［J］. China Civil Engineering Journal, 2010,43(sup.):6975.

［4］Deifalla A, Ghobarah A. Strengthening RC Tbeams subjected to combined torsion and shear using FRP fabrics: Experimental study［J］. Journal of Composites for Construction, ASCE, 2010 14(3): 301311.

［5］胡波，王建国. FRP 约束圆形和矩形截面混凝土柱应力-应变关系统一计算模型［J］.西安建筑科技大学学报:自然科学版,2010, 42（3）:394400.

HU bo, WANG jianguo. Unified model for calculating stress strain relationship of circular and rectangular concrete columns confined with FRP ［J］. Xi’an Univ of Arch & Tech: Natural Science Edition, 2010，42（3）:394400.

［6］Godat A, Neale K W.Numerical, labossière P, numerical modeling of FRP shearstrengthened reinforced concrete beams ［J］.Journal of Composites for Construction,2007:11（6）,640649.

［7］萧澎伟,袁鸿,陆旭生. U型粘贴FPR梁抗剪加固剥离破坏机理研究［C］∥第七届全国建设工程FRP应用学术交流会论文集. 杭州：中国土木工程学会FRP及工程应用专业委员会,2011：176183.

［8］胡亮，钱德令，刘杰，等.基于ＡＢＡＱＵＳ的ＲＣ框架节点的有限元分析［J］.合肥工业大学学报:自然科学版，2012,35（5）:657661.

HU Liang，QIAN Deling, LIU Jie, et al. Finite element analysis of RC frame nodes based on Abaqus［J］. Journal of Hebei University of Technology：Natural Science Edition, 2012,35（5）:657661.

［9］聂建国，王宇航. ABAQUS中混凝土本构模型用于模拟结构静力行为的比较研究［J］. 工程力学, 2013,30(4):5968.

NIE Jianguo,WANG Yuhang. Comparison study of constitutive model of concrete in abaqus for static analysis of structures［J］. Engineering Mechanics, 2013,30(4):5968.

［10］Lu X Z, Jiang J J, Teng J G, et al. Finite element simulation of debonding in FRPtoconcrete bonded joints［J］. Construction and Building Materials, 2006,20:412424.

［11］栗小祜.极限破坏钢筋混凝土梁的加固试验研究［J］.公路工程,2012,37（6）:6264.

LI Xiaohu. Experimental study on reinforcement of failure reinforced concrete beams ［J］. Highway Engineering Journal,2012,37（6）:6264.

［12］高仲学，王文炜，黄辉.预应力碳纤维布加固钢筋混凝土梁抗弯承载力计算［J］.东南大学学报:自然科学版, 2013,43（1）:195202.

GAO Zhongxue,WANG Wenwei,HUANG Hui. Calculation of flexural capacity of RC beams strengthened with prestressed CFRP sheets ［J］. Journal of Southeast Uuiversity:Natural Science Edition,2013,43（1）:195202.

［13］Neubauer U,Rostasy F S.Bond failure of concrete fiber reinforced polymer plates at inclined cracksexperiments and fracture mechanics model［C］ ∥Proc of 4th International Symposium on Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures.Michigan:［s.n.］,1999:369382.

［14］Nakaba K, Kanakubo T, Furuta T,et al. Bond behavior between fiberreinforced polymer laminates and concrete［J］. ACI Structual Journal,2001,98(3):359367.

［15］Kang T H K, Kim W, Ha S S, et al. Hybrid effects of carbonglass FRP sheets in combination with or without concrete beams ［J］. International Journal of Concrete Structures and Materials, 2014, 8(1):2741.

［16］Monti G, Renzellt M, Luciani P.FRP adhesion in uncracked and cracked concrete zones［C］∥Proceedings of the Sixth International Symposium on FRP Reinforcement for Concrete Structures (FRPRCS6).Singapore: ［s.n］,2003:183192.

［17］Garg A K, Abolmaali A. Finiteelement modeling and analysis of reinforced concrete box culverts［J］. Journal of Transportation Engineering, 2009，135（3）:121128.

[1]	WU Jiaping,ZHAO Shexu. Love Waves in a FluidSaturated Double-Porosity Layer with Initial Stress [J]. Journal of Shanghai Jiaotong University, 2014, 48(12): 1777-1783.
[2]	LI Ke1,2* (李科), WANG Ying-yi3 (王颖轶), HUANG Xing-chun2,3 (黄醒春). Regression Analysis of Initial Stress Field Around Faults Based on Fault Throw by Displacement Discontinuity Method [J]. Journal of shanghai Jiaotong University (Science), 2013, 18(4): 474-478.
[3]	WANG Yingyi1,LI Ke2,HUANG Xingchun1. Finite Element Method Regression Back Analysis of Initial Stress Field in a Large Underground Chamber Area [J]. Journal of Shanghai Jiaotong University, 2013, 47(09): 1399-1403.