Analysis of Strength of Adhesive Bonding of Single Lap Joints of Metal with Reinforcements Based on OneDimensional Beam Theory

Abstract

Abstract:

Abstract： In order to enhance the strength of adhesive bonding of single lap joints (SLJs), the adhesive bonding of SLJ with reinforcements was designed based on Goland and Reissner’s onedimensional beam theory model. The adhesive bonding of SLJs whose adherends were aluminum alloy 5052 (Al5052), Al5052 with pasting aluminum and Al5052 with pasting copper were separately tested under tensionshear loading, and stress distributions were acquired by means of finite element analysis. The results show that the strength of joints and the state of stress in the adhesive layer are influenced by the stiffness at the end of the overlap region. The strength of adhesive bonding of SLJ whose adherend is Al5052 with pasting copper is stronger than that of other kinds of joints. The feasibility and validity of adhesive bonding of SLJ with reinforcements are verified by these analysis results.
Key words：

Key words: metal, single lap adhesive, single lap joints, onedimensional beam theory model, rigidity, peeling effect

CLC Number:

WANG Yuqi,HE Xiaocong,DING Yanfang,XING Baoying. Analysis of Strength of Adhesive Bonding of Single Lap Joints of Metal with Reinforcements Based on OneDimensional Beam Theory[J]. Journal of Shanghai Jiaotong University, 2015, 49(01): 49-55.

References

［1］He X C, Gu F S, Ball A. A review of numerical analysis of friction stir welding［J］. Progress in Materials Science, 2014, 65:166.

［2］He X C. A review of finite element analysis of adhesively bonded joints［J］. International Journal of Adhesion and Adhesives, 2011, 31(4): 248264.

［3］史冬岩，王青山，石先杰, 等. 任意边界条件下正交各向异性薄板自由振动特性分析［J］. 上海交通大学学报, 2014,48(3): 434438, 444.

SHI Dongyan, WANG Qingshan, SHI Xianjie, et al. Free vibration analysis of orthotropic thin plates in general boundary conditions［J］. Journal of Shanghai Jiaotong University, 2014, 48(3): 434438,444.

［4］Kumar V R L, Bhat M R, Murthy C R L. Analysis of composite single lap joints using numerical and experimental approach［J］. Journal of Adhesion Science and Technology, 2014, 28(10): 893914.

［5］Moradi A, Leguillon D, Carrère N. Influence of the adhesive thickness on a debonding—An asymptotic model［J］. Engineering Fracture Mechanics, 2013, 114: 5568.

［6］Teutenberg D, Hahn O. Predicting production influences on adhesively bonded joints subjected to cyclic load［J］. Welding in the World, 2013, 57(2): 203213.

［7］Sugiman S, Crocombe A D, Aschroft I A. Modelling the static response of unaged adhesively bonded structures［J］. Engineering Fracture Mechanics, 2013, 98: 296314.

［8］李龙, 胡平, 刘立忠.不同胶层厚度单搭接接头剪切试验与强度预测［J］. 农业机械学报，2010, 41(12):1721.

LI Long, HU Ping, LIU Lizhong. Strength of adhesively bonded single lap for differential bondline thickness and tension loading prediction［J］. Transactions of the Chinese Society for Agricultural Machinery, 2010, 41(12):1721.

［9］王玉奇，何晓聪，刘福龙, 等.奇异性法预测粘接厚度对单搭粘接接头失效的影响［J］. 力学季刊，2014, 35(2):341349.

WANG Yuqi, HE Xiaocong, LIU Fulong, et al. A stress singularity approach to predict initiate failure of single lap joints with varying bondline thickness［J］. Chinese Quarterly of Mechanics, 2014, 35(2):341349.

［10］严沾谋, 游敏, 郑小玲, 等.胶粘剂弹性模量对间隙接头应力和强度的影响［J］. 航空学报，2007, 289(1): 253256.

YAN Zhanmou, YOU Min, ZHENG Xiaoling, et al. Influence of elastic modulus of adhesive on the stress and strength of joint with recessing［J］. Acta Aeronautica Et Astronautica Sinica, 2007, 28(1): 253256.

［11］李龙, 胡平, 刘立忠. 刚度不平衡单搭接粘接接头剪切试验与强度分析［J］. 农业机械学报, 2011, 42(1): 213217.

LI Long, HU Ping, LIU Lizhong. Strength of unsymmetric singlelap adhesively bonded joints［J］. Transactions of the Chinese Society for Agricultural Machinery, 2011, 42(1): 213217.

［12］You M, Li Z, Zheng X L, et al. A numerical and experimental study of preformed angle in the lap zone on adhesively bonded steel single lap joint［J］. International Journal of Adhesion and Adhesives, 2009, 29(3): 280285.

［13］Haghani R, AlEmrani M, Kliger R. Stress distribution in adhesive joints with tapered laminates—Effect of tapering length and material properties［J］. Journal of Composite Materials, 2010, 44(3): 287302.

［14］Fessel G, Broughton J G, Fellows N A, et al. Evaluation of different lapshear joint geometries for automotive applications［J］. International Journal of Adhesion and Adhesives, 2007, 27(7): 574583.

［15］Pereira A M, Ferreira J M, Antunes F V, et al. Analysis of manufacturing parameters on the shear strength of aluminium adhesive singlelap joints［J］. Journal of Materials Processing Technology, 2010, 210(4): 610617.

［16］He X C, Ichikawa M. Effect of thickness control of adhesive layer on strength of adhesive joints［C］//Proceeding of 70th JSME Spring Annual Meeting. Tokyo, Japan: JSME, 1993:490491.

［17］Goland M, Reissner E. The stresses in cemented joints［J］. Journal of Applied Mechanics of ASME, 1944, 11(1): 1727.

［18］Wu Z J, Romeijin A, Wardenier J. Stress expressions of singlelap adhesive joints of dissimilar adherends［J］. Composite Structure, 1997, 38(4): 273280.

[1]	MA Shasha, DING Shengjie, LIU Limin, ZHAO Changying, GU Hanyang, GONG Shuai. Micro-Scale Heat Transfer Characteristics of Evaporating Meniscus for Alkali Metals in High-Temperature Heat Pipes [J]. Journal of Shanghai Jiao Tong University, 2025, 59(5): 617-627.
[2]	Sun Wenwu, Zhuang Tiange, Chen Siping. Improvement of Prior Image for Metal Artifact Reduction of Computed Tomography [J]. J Shanghai Jiaotong Univ Sci, 2025, 30(3): 446-454.
[3]	LI Yuyao, ZHAO Guocheng, XIAO Longfei. Numerical Study on Collection and Environmental Disturbance Characteristics of Different Nodule Collecting Models [J]. Journal of Shanghai Jiao Tong University, 2024, 58(7): 1036-1046.
[4]	LIU Yiwei¹ (刘轶玮), HUA Xueming^1* (华学明), WU Dongsheng¹ (吴东升), LI Fang¹ (李芳), CAI Yan¹ (蔡艳), WANG Huan² (王欢), YANG Xiurong³ (杨修荣). Arc and Droplet Behaviors in Horizontal Short-Arc Pulsed Gas Metal Arc Welding of 9%Ni Steel with ERNiCrMo-3 Welding Wire [J]. J Shanghai Jiaotong Univ Sci, 2024, 29(2): 361-376.
[5]	LENG Junjie¹ (冷俊杰), DI Xinjie^,2*1 (邸新杰), LI Chengning^1,2 (利成宁), CHENG Shanghua³ (程尚华). Toughening Mechanism of Large Heat Input Weld Metal for Marine Engineering Extra-Thick Plate [J]. J Shanghai Jiaotong Univ Sci, 2024, 29(2): 349-360.
[6]	Xuan Wang, Akang Chen, XinLei Wu, Jiatao Zhang, Jichen Dong, Leining Zhang. Synthesis and Modulation of Low-Dimensional Transition Metal Chalcogenide Materials via Atomic Substitution [J]. Nano-Micro Letters, 2024, 16(1): 163-.
[7]	Shuilin Wu, Yibing Yang, Mingzi Sun, Tian Zhang, Shaozhuan Huang, Daohong Zhang, Bolong Huang, Pengfei Wang, Wenjun Zhang. Dilute Aqueous-Aprotic Electrolyte Towards Robust Zn-Ion Hybrid Supercapacitor with High Operation Voltage and Long Lifespan [J]. Nano-Micro Letters, 2024, 16(1): 161-.
[8]	Liping Chen, Guiqiang Cao, Yong Li, Guannan Zu, Ruixian Duan, Yang Bai, Kaiyu Xue, Yonghong Fu, Yunhua Xu, Juan Wang, Xifei Li. A Review on Engineering Transition Metal Compound Catalysts to Accelerate the Redox Kinetics of Sulfur Cathodes for Lithium-Sulfur Batteries [J]. Nano-Micro Letters, 2024, 16(1): 97-.
[9]	Zhaosu Liu, Si Yin Tee, Guijian Guan, Ming-Yong Han. Atomically Substitutional Engineering of Transition Metal Dichalcogenide Layers for Enhancing Tailored Properties and Superior Applications [J]. Nano-Micro Letters, 2024, 16(1): 95-.
[10]	Zibo Chen, Shaodian Yang, Junhua Huang, Yifan Gu, Weibo Huang, Shaoyong Liu, Zhiqiang Lin, Zhiping Zeng, Yougen Hu, Zimin Chen, Boru Yang, Xuchun Gui. Flexible, Transparent and Conductive Metal Mesh Films with Ultra-High FoM for Stretchable Heating and Electromagnetic Interference Shielding [J]. Nano-Micro Letters, 2024, 16(1): 92-.
[11]	Wei Guo, Linhui Yu, Ling Tang, Yan Wan, Yangming Lin. Recent Advances in Mechanistic Understanding of Metal-Free Carbon Thermocatalysis and Electrocatalysis with Model Molecules [J]. Nano-Micro Letters, 2024, 16(1): 125-.
[12]	Wenli Shu, Junxian Li, Guangwan Zhang, Jiashen Meng, Xuanpeng Wang, Liqiang Mai. Progress on Transition Metal Ions Dissolution Suppression Strategies in Prussian Blue Analogs for Aqueous Sodium-/Potassium-Ion Batteries [J]. Nano-Micro Letters, 2024, 16(1): 128-.
[13]	Fuyu Chen, Bai-Qing Zhao, Kaifeng Huang, Xiu-Fen Ma, Hong-Yi Li, Xie Zhang, Jiang Diao, Jili Yue, Guangsheng Huang, Jingfeng Wang, Fusheng Pan. Dual-Defect Engineering Strategy Enables High-Durability Rechargeable Magnesium-Metal Batteries [J]. Nano-Micro Letters, 2024, 16(1): 184-.
[14]	Marco Girolami, Fabio Matteocci, Sara Pettinato, Valerio Serpente, Eleonora Bolli, Barbara Paci, Amanda Generosi, Stefano Salvatori, Aldo Di Carlo, Daniele M. Trucchi. Metal-Halide Perovskite Submicrometer-Thick Films for Ultra-Stable Self-Powered Direct X-Ray Detectors [J]. Nano-Micro Letters, 2024, 16(1): 182-.
[15]	Zheng Zhang, Jingren Gou, Kaixuan Cui, Xin Zhang, Yujian Yao, Suqing Wang, Haihui Wang. 12.6 μm-Thick Asymmetric Composite Electrolyte with Superior Interfacial Stability for Solid-State Lithium-Metal Batteries [J]. Nano-Micro Letters, 2024, 16(1): 181-.