Experimental Study of Optimal Load Characteristics of Low Temperature Heat Organic Ranine Cycle Power Generation

Abstract

Abstract:

The experimental study of the small organic Ranine cycle (ORC) power system performance under different heat resource temperature and different load resistance was conducted. The organic Rankine cycle power generation experimental system was built using scroll expander with the working fluid R600a utilizing low temperature heat. The results show that when the heat source temperature does not exceed 120 ℃, the experimental system has a maximum generating power of 1.05 kW and power generation efficiency of up to 4.51%, the scroll expander rotation speed and expansion ratio can reach 2 922 r/min and 3.03, respectively; There exists an optimum load resistance value which makes the power generation, unit power output and power generation efficiency ratio maximum under different heat temperatures and different working fluid mass flow rates. The scroll expander should match permanent magnet generator and the load when designing power systems so that the system can get the best performance.

Key words: low temperature heat, organic Ranine cycle (ORC), scroll expander, load resistance, match

CLC Number:

TK 17

TANG Lei，WANG Yuping，YANG Ping，WENG Yiwu. Experimental Study of Optimal Load Characteristics of Low Temperature Heat Organic Ranine Cycle Power Generation[J]. Journal of Shanghai Jiaotong University, 2014, 48(09): 1268-1273.

References

［1］Gu W, Weng Y, Wang Y, et al．Theoretical and experimental investigation of an organic Rankine cycle for a waste heat recovery system ［J］．Journal of Power and Energy， 2009， 223(5)： 523533．

［2］顾伟，孙绍芹，翁一武，等．采用涡旋膨胀机的低品位热能有机物朗肯循环发电系统实验研究［J］．中国电机工程学报， 2011， 31(7)： 2025.

GU Wei， SUN Shaoqin， WENG Yiwu， et al．Experimental study on low grade heat driven organic rankine cycle by scroll expander ［J］. Proceeding of the CSEE, 2011， 31(7): 2025．

［3］Mathias J A， Johnston J R， Cao J M， et al．Experimental testing of gerotor and scroll expanders used in，and energetic and exergetic modeling of an organic rankine cycle［J］．Journal of Energy Resources Technology， 2009， 131(1)： 19．

［4］Peterson R B， Wang H， Herron T．Performance of a smallscale regenerative Rankine power cycle employing a scroll expander［J］．Journal of Power and Energy， 2008， 222(3)： 271282．

［5］Quoilin S, Lemort V, Lebrun J. Experimental study and modeling of an organic rankine cycle using scroll expander ［J］. Applied Energy, 2010, 87(4): 12601268．

［6］Li M G, Wang J F, He W F, et al．Construction and preliminary test of a lowtemperature regenerative organicrankine cycle (ORC) using R123［J］. Renewable Energy， 2013, 57： 216212．

［7］Kang S H．Design and experimental study of ORC (organic Rankine cycle) and radial turbine using R245fa working fluid［J］. Energy, 2012, 41(1): 514524．

［8］Pei G, Li J, Li Y Z, et al．Construction and dynamic test of a smallscale organic rankine cycle ［J］. Energy， 2011， 36(5)： 32153223．

［9］Pan W G, Ren J X, Li Y G．Experimental study of a novel heat pipetype photovoltaic/thermal system ［J］．Advanced Materials Research, 2012, 347353: 403408．

［10］Li J, Pei G, Li Y, et al．Examination of the expander leaving loss in variable organic Rankine cycle operation ［J］． Energy Conversion and Management，2013, 65： 6674．

［11］Gao P, Zhao L. Theoretical and experimental investigation on component’ proportion of zeotropic mixtures based on relation betweentemperature and enthalpy during phase change ［J］. Energy Conversion and Management， 2008， 49(6)： 15671573．

［12］王世峰. 风轮、发电机与负载的匹配性研究［D］．呼和浩特:内蒙古工业大学能源与动力工程学院, 2007．

（上接第1267页）

［8］匡震邦. 非线性连续介质力学［M］. 上海:上海交通大学出版社, 2002: 179185.

［9］Gao Z, Lister K, Desai J P. Constitutive modelling of liver tissue: Experiment and theory ［J］. Annals of Biomedical Engineering, 2010, 38(2): 505516.

［10］Toms S R, Eberhardt A W. A nonlinear finite element analysis of the periodontal ligament under orthodontic tooth loading ［J］. American Journal of Orthodontics and Dentofacial Orthopedics, 2003, 123(6): 657665.

［11］Toms S R, Dakin G J, Lemons J E, et al. Quasilinear viscoelastic behavior of the human periodontal ligament ［J］. Journal of Biomechanics, 2002, 35 (10):14111415.

［12］黄辉祥, 汤文成, 吴斌, 等. 基于超弹性模型的牙周膜生物力学响应［J］.东南大学学报:自然科学版, 2013, 43(2): 340344.

HUANG Huixiang, TANG Wencheng, WU Bin, et al. Biomechanical response for periodontal ligament based on hyperelastic model ［J］. Journal of Southeast University: Natural Science Edition, 2013, 43(2): 340344.第48卷第9期2014年9月上海交通大学学报JOURNAL OF SHANGHAI JIAO TONG UNIVERSITYVol.48 No.9Sep. 2014

[1]	LI Linyan, HAN Shuang, QIAO Yanhui, LI Li, LIU Yongqian, YAN Jie, LIU Haidong. A Wind-Solar-Electric Vehicles Coordination Scheduling Method for High Proportion New Energy Grid-Connected Scenarios [J]. Journal of Shanghai Jiao Tong University, 2022, 56(5): 554-563.
[2]	LIU Zhuoran (刘卓然), ZHAO Xu∗ (赵旭). Multilevel Disparity Reconstruction Network for Real-Time Stereo Matching [J]. J Shanghai Jiaotong Univ Sci, 2022, 27(5): 715-722.
[3]	ZHOU Zhipeng, YIN Dong, DING Jinwen, LUO Yuhao, YUAN Mingyue, ZHU Chengfeng. Collaborative Tracking Method in Multi-Camera System [J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 802-810.
[4]	WANG Wei，WANG Min，HU Juncong，BAO Yidong，JIN Xia，CHEN Wenliang. Virtual Matching Method Based on Finite Element Simulation in Automotive Panel [J]. Journal of Shanghai Jiaotong University, 2020, 54(5): 532-543.
[5]	ZHONG Haowen (钟昊文), WANG Chao (王超), TUO Hongya (庹红娅), HU Jian (胡健), QIAO Lingfeng (乔凌峰), JING Zhongliang (敬忠良). Transfer Learning Based on Joint Feature Matching and Adversarial Networks [J]. Journal of Shanghai Jiao Tong University (Science), 2019, 24(6): 699-705.
[6]	LIU Guangkai (刘广凯), SUN Huixian (孙慧贤), QUAN Houde (全厚德), CUI Peizhang (崔佩璋), ZHU Shilei (朱世磊), CHI Kuo (池阔). Preliminary Application of Scale Transformation Stochastic Resonance in Dual-Sequence Frequency Hopping System [J]. Journal of Shanghai Jiao Tong University (Science), 2019, 24(6): 775-781.
[7]	FENG Wenjiang，LI Le，DAI Caili. Pilot Allocation Based on Matched Game for Massive Multiple-Input Multiple-Output Systems [J]. Journal of Shanghai Jiaotong University, 2019, 53(3): 327-333.
[8]	ZHANG Ying* (张瑛), LI Zeyou (李泽有), LI Xin (李鑫), YANG Hua (杨华). Efficient Design and Optimization Method for Distributed Amplifiers [J]. Journal of Shanghai Jiao Tong University (Science), 2019, 24(3): 281-286.
[9]	LIAN Pengfei *(廉鹏飞), WU Bin (吴斌), WANG Han (王晗), PU Yilin (蒲钇霖), CHEN Chengying (陈铖颖). High Performance SAR ADC with Mismatch Correction Latch and Improved Comparator Clock [J]. Journal of Shanghai Jiao Tong University (Science), 2019, 24(3): 335-340.
[10]	WU Wenhan,YANG Ming,WANG Bing,WANG Chunxiang. Pallet Detection Based on Contour Matching for Warehouse Robots [J]. Journal of Shanghai Jiaotong University, 2019, 53(2): 197-202.
[11]	ZHOU Jingmei *(周经美), ZHAO Xiangmo (赵祥模), CHENG Xin (程鑫), XU Zhigang (徐志刚), ZHAO Huaixin (赵怀鑫). Vehicle Ego-Localization Based on Streetscape Image Database Under Blind Area of Global Positioning System [J]. Journal of Shanghai Jiao Tong University (Science), 2019, 24(1): 122-129.
[12]	YANG Jingdong,PENG Kun,GU Haonan,SHI Yanwei. Autonomous Localisation Method Based on Linear Feature for Robots [J]. Journal of Shanghai Jiaotong University, 2018, 52(9): 1120-1124.
[13]	QI He,GENG Junping,WANG Kun,LIANG Xianling,ZHU Weiren,FAN Tingting,JIN Ronghong. Design of an X-Band High-Performance Active Integrated Antenna [J]. Journal of Shanghai Jiaotong University, 2018, 52(10): 1249-1254.
[14]	QI Mingxua,b,YANG Minga,b,WANG Chunxiangc,WANG Binga,b. 3D Map Reconstruction in Indoor Environment Based on Normal Distribution Transformation Under Gravity Constraint [J]. Journal of Shanghai Jiaotong University, 2018, 52(1): 26-32.
[15]	SUN Ling (孙玲). A Real-Time Collision-Free Path Planning of a Rust Removal Robot Using an Improved Neural Network [J]. Journal of shanghai Jiaotong University (Science), 2017, 22(5): 633-640.