[1]曹玉章,陶智,徐国强,等.航空发动机传热学[M].北京:北京航空航天大学出社,2005:186198. [2]Metzger D E, Berry R A, Bronson J P. Developing heat transfer in rectangular ducts with staggered arrays of short pin fins[J]. Journal of Heat Transfer, 1982, 104(4): 700706. [3]Ligrani P M, Oliveira M M, Blaskovich T. Comparison of heat transfer augmentation techniques[J]. AIAA Journal, 2003, 41(3): 337362. [4]Indi A, Prabhu S V, Vedula R P. Local heat transfer distribution in a rectangular pin channel with and without vortex generators[J]. Experimental Heat Transfer, 2011, 24(1): 3458. [5]Lawson S A, Thrift A A, Thole K A, et al. Heat transfer from multiple row arrays of low aspect ratio pin fins[J]. International Journal of Heat and Mass Transfer, 2011, 54(17): 40994109. [6]Lyall M E, Thole K A, Kohli A, et al. Heat transfer from low aspect ratio pin fins[J]. Journal of Turbomachinery, 2011, 133(1): 011001. [7]Wang F, Zhang J, Wang S. Investigation on flow and heat transfer characteristics in rectangular channel with dropshaped pin fins[J]. Propulsion and Power Research, 2012, 1(1): 6470. [8]Siw S C, Shih T I P, Alvin M A, et al. Effects of pin detached space on heat transfer and pinfin arrays[J]. Journal of Heat Transfer, 2012, 134(8): 081902. [9]Sahin B, Demir A. Thermal performance analysis and optimum design parameters of heat exchanger having perforated pin fins[J]. Energy Conversion and Management, 2008, 49(6): 16841695. [10]Chang S W, Yang T L, Huang C C, et al. Endwall heat transfer and pressure drop in rectangular channels with attached and detached circular pinfin array[J]. International Journal of Heat and Mass Transfer, 2008, 51(21): 52475259. [11]Gee D L, Webb R L. Forced convection heat transfer in helically ribroughened tubes[J]. International Journal of Heat and Mass Transfer, 1980, 23(8): 11271136. [12]Kays W M, Crawford M E, Weigand B. Convective Heat and Mass Transfer[M]. New York: McGrawHill Inc, 2004. [13]Rao Y, Wan C, Xu Y, et al. Spatiallyresolved heat transfer characteristics in channels with pin fin and pin findimple arrays[J]. International Journal of Thermal Sciences, 2011, 50(11): 22772289. |