Threshold Value of Stiffener Bending Rigidity of Transverse Densely Stiffened Plate Under Pure Shear

Abstract

Abstract: Side shells of bulk carriers composed of transverse densely stiffened plate are subjected to large inplane shearing forces, however stiffener bending rigidity is designed not according to shearing force but according to lateral pressure based on IACS common structural rules for bulk carriers. So it is necessary to investigate the threshold value of stiffener bending rigidity for the stiffened plate under shearing loads. Pure shear buckling strength and ultimate strength of transverse densely stiffened plates with different stiffener bending rigidities were investigated. Then the two kinds of stiffener bending rigidity threshold values were identified respectively when the two kinds of strength of stiffened plate reach the material shear yield limit, which were compared with the calculating value based on AASHTO specifications. The result indicates that the stiffener bending rigidity should be decided by ultimate strength analysis.

Key words: transverse densely stiffened plate, pure shear, elastic buckling strength, ultimate strength, threshold value of dimensionless stiffener bending rigidity

CLC Number:

U 661.4

JI Zhen-Hua, WANG De-Yu. Threshold Value of Stiffener Bending Rigidity of Transverse Densely Stiffened Plate Under Pure Shear[J]. Journal of Shanghai Jiaotong University, 2012, 46(08): 1269-1273.

References

［1］Alinia M M, Habashi H R, Khorram A. Nonlinearity in the postbuckling behavior of thin steel shear panels［J］.ThinWalled Structures, 2009, 47(4): 412420.
［2］Alinia M M, Gheitasi A, Erfani S . Plastic shear buckling of unstiffened stocky plates［J］.Journal of Constructional Steel Research,2009,65(89):16311643.
［3］Gheitasi A, Alinia M M. Slenderness classification of unstiffened metal plates under shear loading［J］.ThinWalled Structures, 2010,48(7):508518.
［4］Alinia M M, Sarraf Shirazi R. On the design of stiffeners in steel plate shear walls［J］.Journal of Constructional Steel Research,2009,65(1011):20692077.
［5］Lee S C, Yoo C H. Strength of plate girder web panels under pure shear［J］.Journal of Structural Engineering, 1998, 124(2):184194.
［6］Lee S C, Yoo C H. Experimental study on ultimate shear strength of web panels［J］.Journal of Structural Engineering, 1999,125(8):847853.
［7］Yoo C H, Lee S C. Mechanics of web panel postbuckling behavior in shear［J］.Journal of Structural Engineering,2006, 132(10):15801589.
［8］邵青,何宇廷.复合材料加筋板剪切稳定性研究［J］.航空精密制造技术, 2010,46(6): 4648.
SHAO Qing, HE Yuting. Study on shear stability performance of composite stiffened panel［J］. Aviation Precision Manufacturing Technology, 2010,46(6): 4648.
［9］王平安，矫桂琼，王波，等.复合材料加筋板在剪切载荷下的屈曲特性研究［J］.机械强度，2009, 31(1): 078082.
WANG Pingan,JIAO Guiqing, WANG Bo, et al. Buckling performance analysis of stiffened composite plate under shear loading［J］. Journal of Mechanical Strength，2009, 31(1): 078082.
［10］Alinia M M. A study into optimization of stiffeners in plates subjected to shear loading［J］. ThinWalled Structures, 2005, 43(5):845860.
［11］Mijuskovic O, Coric B, Pavlovic M N. Transversestiffener requirements for the postbuckling behavior of a plate in shear［J］.ThinWalled Structures, 1999,34(1):4363.
［12］American Association of State Highway and Transportation Officials.AASHTO LRFD，bridge design specifications［M］. Washington DC: American Association of State Highway and Transportation Officials,2005.
［13］Shama M A. Shear stresses in bulk carriers due to shear loading［J］.Journal of Ship Research, 1975,19(3):155163.
［14］IACS. Common structural rules for bulk carriers［M］. London: International Association of Classification Societies, 2006.
［15］胡勇,崔维成.散货船碰撞损伤后的剪切极限强度［J］.船舶力学,2004,8(4):6879.
HU Yong, CUI Weicheng. Ultimate shear strength of bulk carrier with collision damage ［J］. Journal of Ship Mechanics,2004,8(4):6879.

[1]	YU Xinye, XUE Hongxiang, Yan Shuwei. Ultimate Strength and Protective Performance of Stiffened Panels Exposed to Fire-Induced High Temperature [J]. Journal of Shanghai Jiao Tong University, 2022, 56(7): 929-936.
[2]	WANG Pu (王璞), ZHOU Dai (周岱), HUANG Zhen* (黄真). Ultimate Strength of Annular Reinforced Concrete Members Under Combined Actions [J]. Journal of Shanghai Jiao Tong University (Science), 2019, 24(4): 430-438.
[3]	ZHANG Liming,LI Yuanyuan,XUE Hongxiang,TANG Wenyong. The Analysis of Ultimate Strength of Stiffened Panels Exposed to Fire Under Temperature Increase Condition [J]. Journal of Shanghai Jiaotong University, 2019, 53(12): 1420-1427.
[4]	HU Yong-ming, OUYANG Xiong. Discussions on Some Issues in Life Extension Assessment of Deep Water Jacket Structures [J]. Ocean Engineering Equipment and Technology, 2019, 6(1): 478-481.
[5]	VU Van Tuyen, YANG Ping(杨平). Tool for Predicting the Ultimate Bending Moment of Ship and Ship-Shaped Hull Girders [J]. Journal of Shanghai Jiao Tong University (Science), 2018, 23(4): 515-.
[6]	XIONG Zhixin,LUO Peilin. A Modulus Algorithm Analysis of Ultimate Strength of Pressured Hull for DeepSea Submarine [J]. Journal of Shanghai Jiaotong University, 2014, 48(04): 498-501.
[7]	ZHANG Wei-1, PU Ying-Chao-2, TANG Wen-Yong-1, ZHANG Sheng-Kun-1. Longitudinal Ultimate Strength of Composite Ship Hull Considering Delamination Damage Mode [J]. Journal of Shanghai Jiaotong University, 2012, 46(03): 394-397.
[8]	SHI Guijie,WANG Deyu. Analysis of the Similar Model for Ultimate Strength Subjected to Combined Action of Bending and Torsion of a Container Ship [J]. Journal of Shanghai Jiaotong University, 2010, 44(06): 782-0786.