Study on the Microstructure, Chemical Gradient and Machinablity of High-strength Alloy Boron Cast Iron

Abstract

Abstract: Alloy boron cast iron has high property of hardness, high strength, abrasion resistance and heat resistance, which is often used in cylinder liner of highspeed locomotive diesel. The microstructure and chemical composition of the alloy boron cast iron were discussed. The machinability evaluation was carried out by turning tests. The result indicates that the alloy boron cast iron as one kind of Atype graphite cast iron has excellent mechanical property. Sialon ceramic tool shows much better performance compared with uncoated and TiAlN coated P20 carbide tool during high speed cutting of alloy boron cast iron.

Key words: alloy boron cast iron, turning, tool wear, TiAlN coating, Sialon ceramics

AN Qing-Long, NIU Qiu-Lin, MING Wei-Wei, CHEN Ming. Study on the Microstructure, Chemical Gradient and Machinablity of High-strength Alloy Boron Cast Iron[J]. Journal of Shanghai Jiaotong University, 2012, 46(07): 1049-1053.

References

［1］刘炳仁，甄东生，李江，等. 240B型柴油机新型整体ADI平台珩磨网纹气缸套研制［J］. 铁道机车车辆，2006，26(4): 5455.
LIU Bingren, ZHEN Dongsheng, LI Jing, et al. Development of the new overall ADI platform Honing cylinder liner of 240Btype diesel engine ［J］. Railway Locomotive and Car, 2006, 26(4): 5455.
［2］ISO 94512008, Microstructure of cast ironsPart I: Graphite classification by visual analysis ［S］.
［3］杨大春. 硼铸铁汽缸套A型石墨生成及白口消除［J］. 特种铸造及有色合金，2002(5)：4951.
YANG Dachun. “A”type graphite formation and the elimination of the chill layer in boron alloyed cast iron cylinder sleeve［J］. Special Casting & Nonferrous Alloys, 2002(5)：4951.
［4］禇瑾. 高磷含硼活塞铸铁材料的研究［J］. 铸造技术，2005，26(4): 273276.
CHU Jin. Study on high phosphorus boron cast iron of rolling piston ［J］. Foundry Technology, 2005, 26(4): 273276.

［5］岳峰，张松杨. 合金硼铸铁软氮化气缸套的研制［J］. 机车车辆工艺，2009(6): 14.
YUE Feng, ZHANG Songyang. Development of alloy boron cast iron softnitriding cylinder liner ［J］. Locomotive Vehicle Technology, 2009(6): 14.
［6］Pereira A A, Boehs L, Guesser W L. The influence of sulfur on the machinability of gray cast iron FC25 ［J］. Journal of Materials Processing Technology, 2006, 179: 165171.
［7］Ezugwu E O. Key improvements in the machining of difficulttocut aerospace super alloys ［J］. International Journal of Machine Tools and Manufacture, 2005, 45(12/13): 13531367.
［8］Grzesik W, Rech J, Zak K, et al. Machining performance of pearliticferritic nodular cast iron with coated carbide and silicon nitride cutting tools ［J］. International Journal of Machine Tools and Manufacture, 2009, 49: 125133.
［9］Pavel R, Marinescu J, Deis M, et al. Effect of tool wear on surface finish for a case of continuous and

interrupted hard turing ［J］. Journal of Materials Processing Technology, 2005, 170: 341349.
［10］Sharman A R C, Hughes J L, Ridgway K. Workpiece surface integrity and tool life issues when turning inconel 718 nicked based superalloy［J］. Machining Science and Technology, 2004, 8(3): 399414.

[1]	YANG Jingwena (杨静文), ZHANG Libina (张立彬), WANG Pinga (王萍), YAO Junfengb∗ (姚俊峰), ZHAO Xiangmob (赵祥模). Straight-Going Priority in Hierarchical Control Framework for Right-Turning Vehicle Merging Based on Cooperative Game [J]. J Shanghai Jiaotong Univ Sci, 2023, 28(1): 150-160.
[2]	WEI Yali, YIN Wei, LIU Yintian, WANG Xin, HU Chunchao. Research on Big Off-axis Turning Law Under Multiple Constraints for Agile Missile [J]. Air & Space Defense, 2020, 3(3): 96-102.
[3]	SHI Chengang, YAN Yan, WANG Kai, GUO Jinlei, CHEN Jian. Design of Vertical Water-exit Control Commands for Spoilers [J]. Air & Space Defense, 2019, 2(2): 23-30.
[4]	GAO Hui1 (高慧), WANG Zhibo2 (王志博). Dynamic Behavior of Two Part Towing Cable System During Turning [J]. Journal of Shanghai Jiao Tong University (Science), 2018, 23(3): 444-.
[5]	ZHAO Haitao1,FENG Wei1,ZHOU Hai1,YANG Jianguo2. Method for Selection of Temperature Key Points Based on Thermal Error Sensitivity Images and Genetic Optimization [J]. Journal of Shanghai Jiaotong University, 2015, 49(05): 725-729.
[6]	ZHANG Jian-guo (张建国), SHEN Bin (沈彬), SUN Fang-hong* (孙方宏). Fabrication and Drilling Tests of Chemical Vapor Deposition Diamond Coated Drills in Machining Carbon Fiber Reinforced Plastics [J]. Journal of shanghai Jiaotong University (Science), 2013, 18(4): 394-400.
[7]	HE Ye1,WANG Changying2,CHEN Xiaoan1,ZHANG Yong1，LIU Xing1. Finite Element Simulation of Chip Formation Mechanism in Hard Turning GCr15 Steel [J]. Journal of Shanghai Jiaotong University, 2013, 47(05): 800-805.
[8]	. Stepwise CoefficientsModifying Modeling of Thermal Errors of a CNC Machine Tool [J]. Journal of Shanghai Jiaotong University, 2011, 45(11): 1592-1596.
[9]	LI Zhen１,ZHANG Xiangqin1，ZHANG Xueping1,LIU C Richard2 . Rolling Contact Fatigue Life Prediction on Bearing Steel Pre-residual Stress Surfaces Induced by Hard Turning [J]. Journal of Shanghai Jiaotong University, 2011, 45(01): 50-0055.

Study on the Microstructure, Chemical Gradient and Machinablity of High-strength Alloy Boron Cast Iron

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 9

Recommended Articles

Metrics

Comments