| ［1］ |
陈辉, 涂环, 任伟. 大型船舶柴油机性能模拟及优化计算［J］. 上海交通大学学报, 2014, 48(4): 488-492.
|
|
CHEN Hui, TU Huan, REN Wei. Performance simulation and optimization of a large marine diesel engine［J］. Journal of Shanghai Jiao Tong University, 2014, 48(4): 488-492.
|
| ［2］ |
宁李谱, 王立新. 曲轴偏置对活塞裙部混合润滑特性的影响［J］. 汽车工程, 2018, 40(5): 597-604.
|
|
NING Lipu, WANG Lixin. Effects of crankshaft offset on the mixed lubrication characteristics of piston skirt［J］. Automotive Engineering, 2018, 40(5): 597-604.
|
| ［3］ |
李瑞, 孟祥慧. 粘温效应对十字头滑块与活塞裙润滑影响分析［J］. 哈尔滨工程大学学报, 2019, 40(12): 1980-1985.
|
|
LI Rui, MENG Xianghui. Influence of temperature on lubricant viscosity in the crosshead slipper and piston skirt［J］. Journal of Harbin Engineering University, 2019, 40(12): 1980-1985.
|
| ［4］ |
OLANDER P, JACOBSON S. Scuffing resistance testing of piston ring materials for marine two-stroke diesel engines and mapping of the operating mechanisms［J］. Wear, 2015, 330/331: 42-48.
|
| ［5］ |
RAO X, SHENG C X, GUO Z W, et al. Influence of surface groove width on tribological performance for cylinder liner-piston ring components［J］. Tribology Transactions, 2019, 62(2): 239-248.
|
| ［6］ |
刘郡, 张执南, 谢友柏. 低黏度润滑油与织构对活塞环-缸套摩擦特性的影响［J］. 上海交通大学学报, 2018, 52(5): 505-510.
|
|
LIU Jun, ZHANG Zhinan, XIE Youbai. Effect of low viscosity oil and surface texture on friction characteristics of piston ring-liner［J］. Journal of Shanghai Jiao Tong University, 2018, 52(5): 505-510.
|
| ［7］ |
冯学东, 李光琛, 李强. 某高速船用柴油机主轴承弹性流体动力润滑特性分析［J］. 江苏科技大学学报(自然科学版), 2017, 31(2): 158-161.
|
|
FENG Xuedong, LI Guangchen, LI Qiang. Elastohydrodynamic lubrication analysis of the main bearing of a high speed marine diesel engine［J］. Journal of Jiangsu University of Science and Technology (Natural Science Edition), 2017, 31(2): 158-161.
|
| ［8］ |
武起立, 林叶春, 魏立队, 等. 船用二冲程柴油机十字头轴承润滑分析［J］. 润滑与密封, 2016, 41(12): 68-73.
|
|
WU Qili, LIN Yechun, WEI Lidui, et al. Lubrication analysis of crosshead bearing of two stroke marine diesel engine［J］. Lubrication Engineering, 2016, 41(12): 68-73.
|
| ［9］ |
ABANTERIBA S. The analysis of the lubrication condition and friction losses of a single acting cross head guide shoe of a low speed cross head diesel engine: Part I—An alogrithm for the prediction of oil film thickness［J］. Tribology Transactions, 2000, 43(4): 665-670.
|
| ［10］ |
ABANTERIBA S. The analysis of the lubrication condition and friction losses of a single acting cross head guide shoe of a low speed cross head diesel engine: Part II-A practical model for the determination of the oil film thickness［J］. Tribology Transactions, 2000, 43(4): 847-851.
|
| ［11］ |
ABANTERIBA S. The analysis of the lubrication condition and friction losses of a single acting cross head guide shoe of a low speed cross head diesel engine: PART III—Friction and its minimization［J］. Tribology Transactions, 2000, 43(4): 830-836.
|
| ［12］ |
LI R, MENG X H, XIE Y B. A new coupling tribodynamic model of crosshead slipper-guide system and piston skirt-liner system of low-speed marine diesel engines［J］. Tribology International, 2018, 117: 189-205.
|
| ［13］ |
LI R, MENG X H, LI W D, et al. A new comprehensive tribo-dynamic analysis for lubricated translational joints in low-speed two-stroke marine engines ［DB/OL］. (2019-04-18) ［2019-05-14］. http:∥111.186.57.120/journalx_zkb/manuscript/Manuscript!view.action?id=7160473809&tgcthave=false.
|
| ［14］ |
南飞艳, 耿建成, 马晓琴, 等. 十字头滑块端面锡基合金浇注研究［J］. 热加工工艺, 2013, 42(15): 60-62.
|
|
NAN Feiyan, GENG Jiancheng, MA Xiaoqin, et al. Study on tin-based alloy casting of end surface of crosshead slide［J］. Hot Working Technology, 2013, 42(15): 60-62.
|
| ［15］ |
李震, 刘韬, 陈庆. 往复压缩机十字头滑块故障的小波包敏感特征提取研究［J］. 噪声与振动控制, 2017, 37(4): 150-154.
|
|
LI Zhen, LIU Tao, CHEN Qing. Sensitive feature extraction of cross-head slider faults in reciprocating compressors based on wavelet packets［J］. Noise and Vibration Control, 2017, 37(4): 150-154.
|
| ［16］ |
吕延军, 李猛, 张永芳, 等. 轮廓参数对活塞二阶运动和裙部润滑性能的影响研究［J］. 机械工程学报, 2018, 54(15): 100-116.
|
|
L Yanjun, LI Meng, ZHANG Yongfang, et al. Effect of piston skirt profile parameter on secondary motion and lubrication performance of piston［J］. Journal of Mechanical Engineering, 2018, 54(15): 100-116.
|
| ［17］ |
MENG X H, FANG C C, XIE Y B. Transient tribodynamic model of piston skirt-liner systems with variable speed effects［J］. Tribology International, 2016, 94: 640-651.
|
| ［18］ |
PATIR N, CHENG H S. An average flow model for determining effects of three-dimensional roughness on partial hydrodynamic lubrication［J］. Journal of Lubrication Technology, 1978, 100(1): 12-17.
|
| ［19］ |
PATIR N, CHENG H S. Application of average flow model to lubrication between rough sliding surfaces［J］. Journal of Lubrication Technology, 1979, 101(2): 220-229.
|
| ［20］ |
WU C W, ZHENG L Q. An average Reynolds equation for partial film lubrication with a contact factor［J］. Journal of Tribology, 1989, 111(1): 188-191.
|
| ［21］ |
GREENWOOD J A, TRIPP J H. The contact of two nominally flat rough surfaces［J］. Proceedings of the Institution of Mechanical Engineers, 1970, 185(1): 625-633.
|
| ［22］ |
FANG C C, MENG X H, KONG X L, et al. Transient tribo-dynamics analysis and friction loss evaluation of piston during cold- and warm-start of a SI engine［J］. International Journal of Mechanical Sciences, 2017, 133: 767-787.
|
