上海交通大学学报(自然版) ›› 2017, Vol. 51 ›› Issue (7): 864-869.

• 兵器工业 • 上一篇    下一篇

 机械弹性车轮侧向刚度的影响因素分析

 付宏勋,赵又群,杜现斌,王强,肖振   

  1.  南京航空航天大学 能源与动力学院, 南京 210016
  • 出版日期:2017-07-31 发布日期:2017-07-31
  • 基金资助:
     

 Analysis on Influencing Factors of Lateral Stiffness of
 Mechanical Elastic Wheel

 FU Hongxun,ZHAO Youqun,DU Xianbin,WANG Qiang,XIAO Zhen   

  1.  College of Energy and Power Engineering, Nanjing University of
     Aeronautics and Astronautics,  Nanjing 210016, China
  • Online:2017-07-31 Published:2017-07-31
  • Supported by:
     

摘要:  为深入研究机械弹性车轮侧向力学特性,基于理论及数值仿真的方法对车轮侧向刚度影响因素进行了分析.利用能量法建立了輮轮单元侧向刚度理论模型,并得到影响车轮侧向刚度的主要因素.在简化机械弹性车轮结构的基础上,建立了车轮三维有限元模型,并验证了模型的有效性.针对不同垂向载荷、輮轮几何结构参数以及橡胶层剪切模量,对机械弹性车轮进行了侧向刚度特性的仿真试验.计算结果表明:随着垂向载荷、橡胶层剪切模量的增大,车轮侧向刚度均增大;随着輮轮断面高宽比的增大,车轮侧向刚度呈减小趋势.通过对车轮侧向刚度影响因素的理论及数值分析,可为优化车轮刚度特性及改进车轮结构等方面的研究提供参考.

关键词:  , 机械弹性车轮, 侧向刚度, 数值分析

Abstract:  In order to further investigate lateral stiffness properties of mechanical elastic wheel, theoretical and numerical analysis on influencing factors was carried out. Theoretical model of lateral stiffness properties of tire bead unit was established based on energy method, and main factors influencing the wheel lateral stiffness were obtained. On the basis of simplified structure of mechanical elastic wheel, a threedimensional finite element model was established, and the corresponding simulation programs were designed for different vertical loads, structure parameters of tire bead and shear moduli of rubber layer. By using finite element analysis software Abaqus, numerical simulation calculation on lateral stiffness properties of mechanical elastic wheel was completed. And test data of prototype of mechanical elastic wheel were used to verify the validity of the wheel finite element model. The calculation results show that as vertical load or shear modulus of rubber layer increases, lateral stiffness of mechanical elastic wheel increases; with the increase of the depthwidth ratio of tire bead section, the wheel lateral stiffness shows a trend of decrease. Theoretical and numerical research on lateral stiffness of mechanical elastic wheel, reference was provided for optimizing wheel stiffness properties and improving wheel structure.

Key words:  , mechanical elastic wheel, lateral stiffness, numerical analysis

中图分类号: