核电蒸汽发生器690合金管在高温高压水中的腐蚀电化学行为

上海交通大学学报（自然版） ›› 2016, Vol. 50 ›› Issue (04): 514-520.

核电蒸汽发生器690合金管在高温高压水中的腐蚀电化学行为

汪家梅1，段振刚1，张乐福1，孟凡江2，石秀强2

(1. 上海交通大学核能科学与工程学院，上海 200240； 2. 上海核工程研究设计院，上海 200233)

收稿日期:2015-04-09 出版日期:2016-04-28 发布日期:2016-04-28
基金资助:
大型先进压水堆核电站重大专项(2010ZX06004018)资助

Electrochemical Corrosion Behaviors of Alloy 690 in High-Temperature and Highpressure Water

WANG Jiamei1，DUAN Zhengang1，ZHANG Lefu1，MENG Fanjiang2，SHI Xiuqiang2

(1. School of Nuclear Science and Engineering, Shanghai Jiaotong University, Shanghai 200240, China；2. Shanghai Nuclear Engineering Research and Design Institute， Shanghai 200233, China)

Received:2015-04-09 Online:2016-04-28 Published:2016-04-28

摘要/Abstract

摘要： 摘要：通过模拟压水堆一回路水环境，研究了溶液温度(25～285 °C)和溶解氧(DO) (20 μg/L，2.1 mg/L，8.4 mg/L)对690合金电化学腐蚀行为的影响，及690合金在一回路水环境中的均匀腐蚀行为.极化曲线和光电子能谱的结果分析表明：随着溶液温度的升高，690合金的自腐蚀电位下降，自腐蚀电流密度增大，钝化区缩小；随着DO的升高，690合金的自腐蚀电位升高，自腐蚀电流密度降低，钝化区缩小；690合金在一回路水环境中的均匀腐蚀速率为0.244 mg/(dm2·h1/2)，形成了外层富Fe、Cr和Ni的氢氧化物和内层富Fe、Cr和Ni的金属氧化物的氧化膜.

关键词: 690合金, 压水堆, 高温电化学, 均匀腐蚀

Abstract: Abstract： The effects of temperature (25 to 285°C) and dissolved oxygen(20 μg/L, 2.1 mg/L, 8.4 mg/L) on hightemperature electrochemical corrosion behaviors of Alloy 690, and the uniform corrosion behaviors of Alloy 690 were investigated in stimulated pressurized water reactor (PWR) primary water. The results of potentionamic polarization measurements and Xray photoelectron spectroscopy (XPS) reveal that the corrosion potential(Ecorr) decreases, the corrosion current density(Icorr) increases, and the passive potential region shrinks with the increase of temperature while the corrosion potential increases, the corrosion current density decreases, and the passive potential region shrinks with the increase of DO. The uniform corrosion rate of Alloy 690 exposed in investigated conditions is 0.244 mg/(dm2·h1/2),and the oxide, of which the outer layer is rich in FeCrNi hydroxide and the inner layer is rich in FeCrNi oxide, is formed on Alloy 690.

Key words: Key words： Alloy 690, pressurized water reactor（PWR), hightemperature electrochemistry, uniform corrosion

中图分类号:

TL 341

汪家梅1，段振刚1，张乐福1，孟凡江2，石秀强2. 核电蒸汽发生器690合金管在高温高压水中的腐蚀电化学行为[J]. 上海交通大学学报（自然版）, 2016, 50(04): 514-520.

WANG Jiamei1，DUAN Zhengang1，ZHANG Lefu1，MENG Fanjiang2，SHI Xiuqiang2. Electrochemical Corrosion Behaviors of Alloy 690 in High-Temperature and Highpressure Water[J]. Journal of Shanghai Jiaotong University, 2016, 50(04): 514-520.

参考文献

［1］HUANG J, WU X. HAN E H. Electrochemical properties and growth mechanism of passive films on Alloy 690 in hightemperature alkaline environments ［J］. Corrosion Science， 2010， 52(10)： 34443452. ［2］ABRAHAM G J, HAMBROO R B, KAIN V, et al. Electrochemical characterization of oxide film formed at high temperature on Alloy 690 ［J］. Nuclear Engineering and Design, 2012， 243(2)：6975. ［3］CHEN Y Y, CHOU L B, SHIH H C. Effect of solution pH on the electrochemical polarization and stress corrosion cracking of Alloy 690 in 5M NaCl at room temperature［J］. Materials Science and Engineering: A, 2005, 396(1)： 129137. ［4］HUANG J, LIU X, HAN E H, et al. Influence of Zn on oxide films on Alloy 690 in borated and lithiated high temperature water［J］. Corrosion Science，2011， 53(10)： 32543261. ［5］SUN H, WU X, HAN E H, et al. Effects of pH and dissolved oxygen on electrochemical behavior and oxide films of 304SS in borated and lithiated high temperature water［J］. Corrosion Science， 2012， 59： 334342. ［6］HUANG J, WU X, HAN E H. Influence of pH on electrochemical properties of passive films formed on Alloy 690 in high temperature aqueous environments［J］. Corrosion Science， 2009， 51(12)： 29762982. ［7］BETOVA I, BOJINOV M, KARASTOYANOV V, et al. Effect of water chemistry on the oxide film on Alloy 690 during simulated hot functional testing of a pressurised water reactor［J］. Corrosion Science，2012， 58(5)：2032. ［8］GREELEY R S, SMITH Jr W T, STOUGHTON R W, et al. Electromotive force study in aqueous solutions at elevated temperatures. I.The standard potential of the silversilver chlotide electrode［J］. The Journal of Physical Chemistry，1960， 64(5)：652657. ［9］ASTM G103. Standard practice for preparing, cleaning, and evaluating corrosion test specimens［S］. 2003. ［10］MACK J, SAJDL P, KUCˇERA P, et al. In situ electrochemical impedance and noise measurements of corroding stainless steel in high temperature water［J］. Electrochimica Acta， 2006， 51(17)： 35663577. ［11］BAZAN J C, ARVIA A J. The diffusion of ferroand ferricyanide ions in aqueous solutions of sodium hydroxide［J］. Electrochimica Acta，1965，10(10)：10251032. ［12］ROBERTSON J. The mechanism of high temperature aqueous corrosion of steel［J］. Corrosion Science，1989， 29(11)：12751291. ［13］EVANS U R. Mechanism of rusting［J］. Corrosion Science， 1969， 9(11)： 813821. ［14］ZIEMNIAK S E, HANSON M. Corrosion behavior of NiCrFe Alloy 600 in high temperature, hydrogenated water［J］. Corrosion Science，2006，48(2)：498521. ［15］HERMAS A A, SALAM M A, ALJUAID S S, et al. Electrosynthesis and protection role of polyaniline—polvinylalcohol composite on stainless steel［J］. Progress in Organic Coatings， 2014， 77(2)： 403411. ［16］LIU X, WU X, HAN E H. Effect of Zn injection on established surface oxide films on 316L stainless steel in borated and lithiated high temperature water［J］. Corrosion Science， 2012， 65(12)：136144. ［17］McIntyre N S, Cook M G. Xray photoelectron studies on some oxides and hydroxides of cobalt, nickel, and copper［J］. Analytical Chemistry, 1975, 47(13): 22082213. ［18］MACHET A, GALTAYRIES A, MARCUS P, et al. XPS study of oxides formed on nickelbase alloys in hightemperature and highpressure water［J］. Surface and Interface Analysis， 2002， 34(1)： 197200. ［19］ZIEMNIAK S E, HANSON M. Corrosion behavior of NiCrMo Alloy 625 in high temperature, hydrogenated water［J］. Corrosion Science，2003，45(7)：15951618. ［20］ZIEMNIAK S E, HANSON M, SANDER P C. Electropolishing effects on corrosion behavior of 304 stainless steel in high temperature, hydrogenated water［J］. Corrosion Science， 2008， 50(9)： 24652477. ［21］SUN H, WU X, HAN E H. Effects of temperature on the protective property, structure and composition of the oxide film on Alloy 625［J］. Corrosion Science，2009， 51(11)： 25652572. ［22］SUN H, WU X, HAN E H. Effects of temperature on the oxide film properties of 304 stainless steel in high temperature lithium borate buffer solution［J］. Corrosion Science， 2009， 51(12)： 28402847. ［23］FENG Z, CHENG X, DONG C, et al. Effects of dissolved oxygen on electrochemical and semiconductor properties of 316L stainless steel［J］. Journal of Nuclear Materials， 2010， 407(3)： 171177.

[1]	汪家梅1，苏豪展1，何琨2，张乐福1. 电位对508III-52M-690合金焊接接头应力腐蚀的影响[J]. 上海交通大学学报（自然版）, 2018, 52(4): 447-454.
[2]	陈凯，杜东海，张乐福. 690合金在压水堆环境中的腐蚀疲劳裂纹扩展行为[J]. 上海交通大学学报（自然版）, 2017, 51(11): 1281-1286.
[3]	段振刚1，杜东海1，张乐福1，孟凡江2，石秀强2. 304和316L不锈钢的高温电化学腐蚀行为[J]. 上海交通大学学报（自然版）, 2016, 50(02): 215-221.
[4]	陈凯1，杜东海1，陆辉1，张乐福1，石秀强2，徐雪莲2. 690合金传热管疲劳裂纹扩展研究[J]. 上海交通大学学报（自然版）, 2014, 48(11): 1639-1643.
[5]	李永春, 周卫华, 杨燕华, 匡波, 程旭. REPEC非加热实验的RELAP程序模拟[J]. 上海交通大学学报（自然版）, 2011, 45(03): 408-412.