球杆仪安装误差对机床圆测试精度的影响

摘要/Abstract

摘要：

摘要：为了提高球杆仪测量机床误差的准确度，研究了其安装误差对机床圆测试数据的影响及辨识和分离方法.通过分析球杆仪测量过程中某任意位置的几何特征，推导了球杆仪测量值与安装误差间的数学关系.继而利用数学仿真揭示了测量值随安装误差变化的规律，并建立了相应的数学模型.在此基础上，提出了一种对安装误差进行辨识和分离的新方法.仿真实验数据证明，该安装误差辨识方法具有较高的辨识精度.最后，对非接触激光圆进行了测试实验，结果表明，所提出的方法可以有效地辨识和分离球杆仪安装误差，提高了球杆仪圆测试数据的准确度.

关键词: , 球杆仪, 圆测试, 安装误差, 误差辨识, , 误差分离

Abstract:

Abstract： To improve the circular test accuracy of double ball bar (DBB), the mechanism of DBB setup errors was studied and an identification and separation model was proposed. In the first place, based on the analysis of the geometric relationship of an arbitrary position in the process of measurement, the mathematical relationship between DBB measurement and setup errors was established. The distortion rule of measured values along with setup errors was obtained in mathematical simulation, and a new identification and separation method of setup errors was put forward. The simulation results prove that the proposed method can identify setup errors with high accuracy. The noncontact laser measurement results show that the proposed method can effectively identify DBB setup errors and significantly improve the accuracy of circular tests.

Key words: double ball bar(DBB), circular test, setup error, error identification, error separation

中图分类号:

TG 659

卢红星，杨建国，项四通. 球杆仪安装误差对机床圆测试精度的影响[J]. 上海交通大学学报（自然版）, 2015, 49(09): 1353-1358.

LU Hongxing,YANG Jianguo,XIANG Sitong. Effects of Double Ball Bar Setup Errors on Accuracy of Circular Tests of Machine Tools[J]. Journal of Shanghai Jiaotong University, 2015, 49(09): 1353-1358.

参考文献

［1］Tsutsumi M, Tone S, Kato N, et al. Enhancement of geometric accuracy of fiveaxis machining centers based on identification and compensation of geometric deviations［J］. International Journal of Machine Tools and Manufacture, 2013,68:1120.

［2］Lee D M, Zhu Z, Lee K I, et al. Identification and measurement of geometric errors for a fiveaxis machine tool with a tilting head using a double ballbar［J］. International Journal of Precision Engineering and Manufacturing, 2011,12（2）:337343.

［3］Lee K I, Yang S H. Accuracy evaluation of machine tools by modeling spherical deviation based on double ballbar measurements［J］. International Journal of Machine Tools and Manufacture, 2013,75:4654.

［4］ISO 2304, Test code for machine tools. Part 4. Circular tests for numerically controlled machine tools［S］.

［5］Lee K I, Yang S H. Measurement and verification of positionindependent geometric errors of a fiveaxis machine tool using a double ballbar［J］. International Journal of Machine Tools and Manufacture, 2013,70:4552.

［6］Zargarbashi S H H, Mayer J R R. A model based method for centering double ball bar test results preventing fictitious ovalization effects［J］. International Journal of Machine Tools and Manufacture, 2005,45（10）:11321139.

［7］Kakino Y, Ihara Y, Nakatsu Y, et al. The measurement of motion errors of NC machine tools and diagnosis of their origins by using telescoping magnetic ball bar method［J］. CIRP Annals  Manufacturing Technology, 1987,36:377380.

［8］胡伟, 陈志俊, 刘国良, 等. 数控机床圆轨迹非接触式激光测量原理及应用［J］. 现代制造工程, 2007（1）:98100.

HU Wei, CHEN Zhijun, LIU Guoliang, et al. The structure and application of noncontact laser measurement for circular test of NC machine tools［J］. Modern Manufacturing Engineering, 2007（1）:98100.

［9］任永强, 杨建国, 刘国良, 等. 数控机床误差的圆轨迹运动激光非接触测量新方法［J］. 世界制造技术与装备市场, 2004(4):6164.

REN Yongqiang, YANG Jianguo, LIU Guoliang, et al. A new method of noncontact of laser measurement by circular contouring for NC machine tool accuracy［J］. World Manufacturing Engineering & Market, 2004(4):6164.

[1]	王聚团, 戚晓宁, 黄志明. 水下生产管汇测试技术及其改进研究[J]. 海洋工程装备与技术, 2022, 9(2): 43-49.
[2]	袁振钦, 邹科, 孙亚峰, 刘刚, 屈衍, 李居跃. 基于时域分析法的动态电缆疲劳分析[J]. 海洋工程装备与技术, 2022, 9(2): 50-55.
[3]	王娟, 杨明旺, 郑茂尧, 刘凌云, 赵立君. 高强钢在大型半潜式平台组块建造中的应用[J]. 海洋工程装备与技术, 2022, 9(1): 27-31.
[4]	陈欣, 赵晓磊, 王立坤, 肖德明, 张腾月. 深水大型吸力锚建造技术研究[J]. 海洋工程装备与技术, 2022, 9(1): 32-36.
[5]	尹彦坤, 易涤非. 半潜式生产平台船体结构关键节点工程临界评估[J]. 海洋工程装备与技术, 2022, 9(1): 52-57.
[6]	ZHANG Shengfa (张胜发), TANG Na (唐纳), SHEN Guofeng (沈国峰), WANG Han (王悍), QIAO Shan (乔杉). Universal Software Architecture of Magnetic Resonance-Guided Focused Ultrasound Surgery System and Experimental Study[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 471-481.
[7]	MA Qunsheng (马群圣), CEN Xingxing (岑星星), YUAN Junyi (袁骏毅), HOU Xumin (侯旭敏). Word Embedding Bootstrapped Deep Active Learning Method to Information Extraction on Chinese Electronic Medical Record[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 494-502.
[8]	安庆升, 孙立东, 武秋生. 碳纤维增强复合材料发射筒设计研究[J]. 空天防御, 2021, 4(2): 13-.
[9]	KONG Xiangqiang (孔祥强), MENG Xiangxi (孟祥熙), LI Jianbo (李见波), SHANG Yanping (尚燕平), CUI Fulin (崔福林) . Comparative Study on Two-Stage Absorption Refrigeration Systems with Different Working Pairs[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 155-162.
[10]	ZHUANG Weimin (庄蔚敏), WANG Pengyue (王鹏跃), AO Wenhong (熬文宏), CHEN Gang (陈刚) . Experiment and Simulation of Impact Response of Woven CFRP Laminates with Different Stacking Angles[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 218-230.
[11]	ZHOU Xuhui (周旭辉), ZHANG Wenguang (张文光), XIE Jie (谢颉). Effects of Micro-Milling and Laser Engraving on Processing Quality and Implantation Mechanics of PEG-Dexamethasone Coated Neural Probe[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 1-9.
[12]	HUANG Ningning (黄宁宁), MA Yixin (马艺馨), ZHANG Mingzhu (张明珠), GE Hao (葛浩), WU Huawei (吴华伟). Finite Element Modeling of Human Thorax Based on MRI Images for EIT Image Reconstruction[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 33-39.
[13]	WANG Xianjin, GAO Xu, YU Kuigang . Fixture Locating Modelling and Optimization Research of Aluminum Alloy Sidewall in a High-Speed Train Body[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 706-713.
[14]	QIAO Xing, MA Dan, YAO Xuliang, FENG Baolin. Stability and Numerical Analysis of a Standby System[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 769-778.
[15]	WU Jin, MIN Yu, YANG Xiaodie, MA Simin . Micro-Expression Recognition Algorithm Based on Information Entropy Feature[J]. Journal of Shanghai Jiao Tong University(Science), 2020, 25(5): 589-599.